From: Pablo Sebastian Greco <lkml@fliagreco.com.ar>
To: Christian <christiand59@web.de>
Cc: linux-kernel@vger.kernel.org, Tejun Heo <htejun@gmail.com>
Subject: Re: [BUG 2.6.21-rc3-git9] SATA NCQ failure with Samsum HD401LJ
Date: Mon, 19 Mar 2007 09:21:04 -0300 [thread overview]
Message-ID: <45FE8030.9090400@fliagreco.com.ar> (raw)
In-Reply-To: <200703182131.00476.christiand59@web.de>
Christian wrote:
> On Sunday 18 March 2007 06:43:09 you wrote:
>
>> Christian wrote:
>>
>>>> This does indeed look like a drive side issue to me (the controller is
>>>> reporting CPBs with response flags 2 which as far as I can tell
>>>> indicates it's still waiting for the drive to complete the request).
>>>>
>>> I have been using this hw-config (SATA II, NCQ) since the nvidia ADMA
>>> support made it in the -mm kernel (maybe around 2.6.19-mm? or even
>>> earlyer). I'm seeing this problem excessively since I upgraded to
>>> 2.6.21-rc3-mm1. I think something got broken recently...
>>>
>> Can you post the result of "hdparm -I /dev/sdX"?
>>
>
> Output generated on 2.6.21-rc3-mm1 #3 SMP PREEMPT
>
> user@ubuntu:~$ sudo hdparm -I /dev/sda
>
> /dev/sda:
>
> ATA device, with non-removable media
> Model Number: SAMSUNG HD401LJ
> Serial Number: S0HVJ1FL900207
> Firmware Revision: ZZ100-15
> Standards:
> Used: ATA/ATAPI-7 T13 1532D revision 4a
> Supported: 7 6 5 4
> Configuration:
> Logical max current
> cylinders 16383 16383
> heads 16 16
> sectors/track 63 63
> --
> CHS current addressable sectors: 16514064
> LBA user addressable sectors: 268435455
> LBA48 user addressable sectors: 781422768
> device size with M = 1024*1024: 381554 MBytes
> device size with M = 1000*1000: 400088 MBytes (400 GB)
> Capabilities:
> LBA, IORDY(can be disabled)
> Queue depth: 32
> Standby timer values: spec'd by Standard, no device specific minimum
> R/W multiple sector transfer: Max = 16 Current = 16
> Recommended acoustic management value: 254, current value: 0
> DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
> udma7
> Cycle time: min=120ns recommended=120ns
> PIO: pio0 pio1 pio2 pio3 pio4
> Cycle time: no flow control=120ns IORDY flow control=120ns
> Commands/features:
> Enabled Supported:
> * SMART feature set
> Security Mode feature set
> * Power Management feature set
> * Write cache
> * Look-ahead
> * Host Protected Area feature set
> * WRITE_BUFFER command
> * READ_BUFFER command
> * NOP cmd
> * DOWNLOAD_MICROCODE
> SET_MAX security extension
> Automatic Acoustic Management feature set
> * 48-bit Address feature set
> * Device Configuration Overlay feature set
> * Mandatory FLUSH_CACHE
> * FLUSH_CACHE_EXT
> * SMART error logging
> * SMART self-test
> * General Purpose Logging feature set
> * SATA-I signaling speed (1.5Gb/s)
> * SATA-II signaling speed (3.0Gb/s)
> * Native Command Queueing (NCQ)
> * Host-initiated interface power management
> * Phy event counters
> DMA Setup Auto-Activate optimization
> Device-initiated interface power management
> * Software settings preservation
> * SMART Command Transport (SCT) feature set
> * SCT Long Sector Access (AC1)
> * SCT LBA Segment Access (AC2)
> * SCT Error Recovery Control (AC3)
> * SCT Features Control (AC4)
> * SCT Data Tables (AC5)
> Security:
> Master password revision code = 65534
> supported
> not enabled
> not locked
> frozen
> not expired: security count
> supported: enhanced erase
> 228min for SECURITY ERASE UNIT. 228min for ENHANCED SECURITY ERASE
> UNIT.
> Checksum: correct
>
>
> user@ubuntu:~$ sudo hdparm -I /dev/sdb
>
> /dev/sdb:
>
> ATA device, with non-removable media
> Model Number: SAMSUNG SP2504C
> Serial Number: S09QJ1LYC06381
> Firmware Revision: VT100-33
> Standards:
> Used: ATA/ATAPI-7 T13 1532D revision 4a
> Supported: 7 6 5 4
> Configuration:
> Logical max current
> cylinders 16383 16383
> heads 16 16
> sectors/track 63 63
> --
> CHS current addressable sectors: 16514064
> LBA user addressable sectors: 268435455
> LBA48 user addressable sectors: 488397168
> device size with M = 1024*1024: 238475 MBytes
> device size with M = 1000*1000: 250059 MBytes (250 GB)
> Capabilities:
> LBA, IORDY(can be disabled)
> Queue depth: 32
> Standby timer values: spec'd by Standard, no device specific minimum
> R/W multiple sector transfer: Max = 16 Current = 16
> Recommended acoustic management value: 254, current value: 254
> DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
> udma7
> Cycle time: min=120ns recommended=120ns
> PIO: pio0 pio1 pio2 pio3 pio4
> Cycle time: no flow control=120ns IORDY flow control=120ns
> Commands/features:
> Enabled Supported:
> * SMART feature set
> Security Mode feature set
> * Power Management feature set
> * Write cache
> * Look-ahead
> * Host Protected Area feature set
> * WRITE_BUFFER command
> * READ_BUFFER command
> * NOP cmd
> * DOWNLOAD_MICROCODE
> SET_MAX security extension
> * Automatic Acoustic Management feature set
> * 48-bit Address feature set
> * Device Configuration Overlay feature set
> * Mandatory FLUSH_CACHE
> * FLUSH_CACHE_EXT
> * SMART error logging
> * SMART self-test
> * General Purpose Logging feature set
> * SATA-I signaling speed (1.5Gb/s)
> * SATA-II signaling speed (3.0Gb/s)
> * Native Command Queueing (NCQ)
> * Host-initiated interface power management
> * Phy event counters
> DMA Setup Auto-Activate optimization
> Device-initiated interface power management
> * Software settings preservation
> Security:
> Master password revision code = 65534
> supported
> not enabled
> not locked
> frozen
> not expired: security count
> supported: enhanced erase
> 120min for SECURITY ERASE UNIT. 120min for ENHANCED SECURITY ERASE
> UNIT.
> Checksum: correct
>
> user@ubuntu:~$ sudo hdparm -I /dev/sdc
>
> /dev/sdc:
>
> ATA device, with non-removable media
> Model Number: SAMSUNG SP2504C
> Serial Number: S09QJ10L420645
> Firmware Revision: VT100-41
> Standards:
> Used: ATA/ATAPI-7 T13 1532D revision 4a
> Supported: 7 6 5 4
> Configuration:
> Logical max current
> cylinders 16383 16383
> heads 16 16
> sectors/track 63 63
> --
> CHS current addressable sectors: 16514064
> LBA user addressable sectors: 268435455
> LBA48 user addressable sectors: 488397168
> device size with M = 1024*1024: 238475 MBytes
> device size with M = 1000*1000: 250059 MBytes (250 GB)
> Capabilities:
> LBA, IORDY(can be disabled)
> Queue depth: 32
> Standby timer values: spec'd by Standard, no device specific minimum
> R/W multiple sector transfer: Max = 16 Current = 16
> Recommended acoustic management value: 254, current value: 0
> DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
> udma7
> Cycle time: min=120ns recommended=120ns
> PIO: pio0 pio1 pio2 pio3 pio4
> Cycle time: no flow control=120ns IORDY flow control=120ns
> Commands/features:
> Enabled Supported:
> SMART feature set
> Security Mode feature set
> * Power Management feature set
> * Write cache
> * Look-ahead
> * Host Protected Area feature set
> * WRITE_BUFFER command
> * READ_BUFFER command
> * NOP cmd
> * DOWNLOAD_MICROCODE
> SET_MAX security extension
> Automatic Acoustic Management feature set
> * 48-bit Address feature set
> * Device Configuration Overlay feature set
> * Mandatory FLUSH_CACHE
> * FLUSH_CACHE_EXT
> * SMART error logging
> * SMART self-test
> * General Purpose Logging feature set
> * Segmented DOWNLOAD_MICROCODE
> * SATA-I signaling speed (1.5Gb/s)
> * SATA-II signaling speed (3.0Gb/s)
> * Native Command Queueing (NCQ)
> * Host-initiated interface power management
> * Phy event counters
> DMA Setup Auto-Activate optimization
> Device-initiated interface power management
> * Software settings preservation
> * SMART Command Transport (SCT) feature set
> * SCT Long Sector Access (AC1)
> * SCT LBA Segment Access (AC2)
> * SCT Error Recovery Control (AC3)
> * SCT Features Control (AC4)
> * SCT Data Tables (AC5)
> Security:
> Master password revision code = 65534
> supported
> not enabled
> not locked
> frozen
> not expired: security count
> supported: enhanced erase
> 88min for SECURITY ERASE UNIT. 88min for ENHANCED SECURITY ERASE UNIT.
> Checksum: correct
>
> -Christian
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
Tejun: sdb and sdc are exactly the same drives as when I had my problem.
Christian: Can you verify if this firmware upgrade helps?
http://www.samsung.com/Products/HardDiskDrive/support/faqs/faqs_20060414_0000246673.htm
Thanks.
Pablo.
next prev parent reply other threads:[~2007-03-19 12:21 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <fa.wBi/iM3CKSfrll7UnPHTbU0scEQ@ifi.uio.no>
2007-03-16 13:56 ` [BUG 2.6.21-rc3-git9] SATA NCQ failure with Samsum HD401LJ Robert Hancock
2007-03-16 14:44 ` Christian
2007-03-18 5:43 ` Tejun Heo
2007-03-18 20:31 ` Christian
2007-03-19 2:48 ` Tejun Heo
2007-03-19 7:08 ` Christian
2007-03-19 7:39 ` Tejun Heo
2007-03-21 14:34 ` Christian
2007-03-21 16:35 ` Tejun Heo
2007-03-19 12:09 ` Jeff Garzik
2007-03-20 9:41 ` Max Kellermann
2007-03-19 12:21 ` Pablo Sebastian Greco [this message]
2007-03-16 11:20 Max Kellermann
2007-03-16 14:34 ` Christian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45FE8030.9090400@fliagreco.com.ar \
--to=lkml@fliagreco.com.ar \
--cc=christiand59@web.de \
--cc=htejun@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.