From: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: mm snapshot broken-out-2007-03-18-02-44.tar.gz uploaded
Date: Tue, 20 Mar 2007 08:17:13 +0100 [thread overview]
Message-ID: <45FF8A79.7010201@googlemail.com> (raw)
In-Reply-To: <200703180946.l2I9kTVc020636@shell0.pdx.osdl.net>
akpm@linux-foundation.org napisał(a):
> The mm snapshot broken-out-2007-03-18-02-44.tar.gz has been uploaded to
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-03-18-02-44.tar.gz
>
> It contains the following patches against 2.6.21-rc4:
PM: Adding info for No Bus:vcsa7
BUG: at kernel/lockdep.c:2430 check_flags()
[<c0105256>] show_trace_log_lvl+0x1a/0x2f
[<c010597b>] show_trace+0x12/0x14
[<c0105a3d>] dump_stack+0x16/0x18
[<c013e1b5>] check_flags+0xb7/0x187
[<c01413ea>] lock_acquire+0x3a/0x93
[<c0139a64>] down_write+0x3a/0x54
[<c0170563>] sys_munmap+0x23/0x3f
[<c0104270>] syscall_call+0x7/0xb
=======================
irq event stamp: 302470
hardirqs last enabled at (302469): [<c0104391>] syscall_exit_work+0x11/0x26
hardirqs last disabled at (302470): [<c0104119>] ret_from_exception+0x9/0xc
softirqs last enabled at (301928): [<c0128e58>] __do_softirq+0xe4/0xea
softirqs last disabled at (301921): [<c0128e97>] do_softirq+0x39/0x55
oprofile: using NMI interrupt.
printk: 6 messages suppressed.
BUG: using smp_processor_id() in preemptible [00000001] code: mount/27913
caller is avail_to_resrv_perfctr_nmi_bit+0x2b/0x43
[<c0105256>] show_trace_log_lvl+0x1a/0x2f
[<c010597b>] show_trace+0x12/0x14
[<c0105a3d>] dump_stack+0x16/0x18
[<c0213313>] debug_smp_processor_id+0xb3/0xc8
[<c0116a26>] avail_to_resrv_perfctr_nmi_bit+0x2b/0x43
[<fdc819b9>] nmi_create_files+0x2a/0x10e [oprofile]
[<fdc80f52>] oprofile_create_files+0xe6/0xec [oprofile]
[<fdc81157>] oprofilefs_fill_super+0x78/0x7e [oprofile]
[<c0182d2e>] get_sb_single+0x59/0x9f
[<fdc8108f>] oprofilefs_get_sb+0x1c/0x1e [oprofile]
[<c0182792>] vfs_kern_mount+0x81/0xf1
[<c0182852>] do_kern_mount+0x38/0xde
[<c0196671>] do_mount+0x605/0x693
[<c019677f>] sys_mount+0x80/0xb5
[<c0104270>] syscall_call+0x7/0xb
=======================
BUG: using smp_processor_id() in preemptible [00000001] code: mount/27913
caller is avail_to_resrv_perfctr_nmi_bit+0x2b/0x43
[<c0105256>] show_trace_log_lvl+0x1a/0x2f
[<c010597b>] show_trace+0x12/0x14
[<c0105a3d>] dump_stack+0x16/0x18
[<c0213313>] debug_smp_processor_id+0xb3/0xc8
[<c0116a26>] avail_to_resrv_perfctr_nmi_bit+0x2b/0x43
[<fdc819b9>] nmi_create_files+0x2a/0x10e [oprofile]
[<fdc80f52>] oprofile_create_files+0xe6/0xec [oprofile]
[<fdc81157>] oprofilefs_fill_super+0x78/0x7e [oprofile]
[<c0182d2e>] get_sb_single+0x59/0x9f
[<fdc8108f>] oprofilefs_get_sb+0x1c/0x1e [oprofile]
[<c0182792>] vfs_kern_mount+0x81/0xf1
[<c0182852>] do_kern_mount+0x38/0xde
[<c0196671>] do_mount+0x605/0x693
[<c019677f>] sys_mount+0x80/0xb5
[<c0104270>] syscall_call+0x7/0xb
=======================
BUG: using smp_processor_id() in preemptible [00000001] code: mount/27913
caller is avail_to_resrv_perfctr_nmi_bit+0x2b/0x43
[<c0105256>] show_trace_log_lvl+0x1a/0x2f
[<c010597b>] show_trace+0x12/0x14
[<c0105a3d>] dump_stack+0x16/0x18
[<c0213313>] debug_smp_processor_id+0xb3/0xc8
[<c0116a26>] avail_to_resrv_perfctr_nmi_bit+0x2b/0x43
[<fdc819b9>] nmi_create_files+0x2a/0x10e [oprofile]
[<fdc80f52>] oprofile_create_files+0xe6/0xec [oprofile]
[<fdc81157>] oprofilefs_fill_super+0x78/0x7e [oprofile]
[<c0182d2e>] get_sb_single+0x59/0x9f
[<fdc8108f>] oprofilefs_get_sb+0x1c/0x1e [oprofile]
[<c0182792>] vfs_kern_mount+0x81/0xf1
[<c0182852>] do_kern_mount+0x38/0xde
[<c0196671>] do_mount+0x605/0x693
[<c019677f>] sys_mount+0x80/0xb5
[<c0104270>] syscall_call+0x7/0xb
=======================
BUG: using smp_processor_id() in preemptible [00000001] code: mount/27913
caller is avail_to_resrv_perfctr_nmi_bit+0x2b/0x43
[<c0105256>] show_trace_log_lvl+0x1a/0x2f
[<c010597b>] show_trace+0x12/0x14
[<c0105a3d>] dump_stack+0x16/0x18
[<c0213313>] debug_smp_processor_id+0xb3/0xc8
[<c0116a26>] avail_to_resrv_perfctr_nmi_bit+0x2b/0x43
[<fdc819b9>] nmi_create_files+0x2a/0x10e [oprofile]
[<fdc80f52>] oprofile_create_files+0xe6/0xec [oprofile]
[<fdc81157>] oprofilefs_fill_super+0x78/0x7e [oprofile]
[<c0182d2e>] get_sb_single+0x59/0x9f
[<fdc8108f>] oprofilefs_get_sb+0x1c/0x1e [oprofile]
[<c0182792>] vfs_kern_mount+0x81/0xf1
[<c0182852>] do_kern_mount+0x38/0xde
[<c0196671>] do_mount+0x605/0x693
[<c019677f>] sys_mount+0x80/0xb5
[<c0104270>] syscall_call+0x7/0xb
=======================
SELinux: initialized (dev oprofilefs, type oprofilefs), uses genfs_contexts
l *avail_to_resrv_perfctr_nmi_bit+0x2b/0x43
0xc01169fb is in avail_to_resrv_perfctr_nmi_bit (arch/i386/kernel/nmi.c:124).
119 return 0;
120 }
121
122 /* checks for a bit availability (hack for oprofile) */
123 int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
124 {
125 BUG_ON(counter > NMI_MAX_COUNTER_BITS);
126
127 return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
128 }
quilt patches arch/i386/kernel/nmi.c
x86_64-mm-i386-make-nmi-use-perfctr1-for-architectural-perfmon-take-2.patch
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/broken-out-2007-03-18-02-44/mm-config
Regards,
Michal
--
Michal K. K. Piotrowski
LTG - Linux Testers Group (PL)
(http://www.stardust.webpages.pl/ltg/)
LTG - Linux Testers Group (EN)
(http://www.stardust.webpages.pl/linux_testers_group_en/)
next prev parent reply other threads:[~2007-03-20 7:18 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-18 9:44 mm snapshot broken-out-2007-03-18-02-44.tar.gz uploaded akpm
2007-03-18 18:35 ` Michal Piotrowski
[not found] ` <6bffcb0e0703190845s6bdc1a65p71937d1dffbf6d9e@mail.gmail.com>
2007-03-19 15:54 ` Pekka J Enberg
2007-03-19 16:29 ` Michal Piotrowski
2007-03-19 16:34 ` Michal Piotrowski
2007-03-19 16:39 ` Pekka J Enberg
2007-03-19 16:38 ` Pekka J Enberg
2007-03-19 16:45 ` Michal Piotrowski
[not found] ` <6bffcb0e0703191024w527638f8yacc3a8fea9fd451d@mail.gmail.com>
2007-03-19 18:02 ` Michal Piotrowski
2007-03-19 18:10 ` Pekka J Enberg
2007-03-19 19:27 ` Michal Piotrowski
2007-03-19 23:25 ` Andrew Morton
2007-03-20 11:43 ` Sam Ravnborg
2007-03-19 19:23 ` Michal Piotrowski
2007-03-19 21:08 ` Andrew Morton
[not found] ` <6bffcb0e0703191437i2ee706d4xaec3bc11ca7c3234@mail.gmail.com>
2007-03-20 1:58 ` Andrew Morton
2007-03-20 2:02 ` Andrew Morton
2007-03-20 2:47 ` Nick Piggin
2007-03-20 4:56 ` Andrew Morton
2007-03-20 5:17 ` Nick Piggin
2007-03-20 5:18 ` Nick Piggin
2007-03-20 9:07 ` Michal Piotrowski
2007-03-19 19:56 ` Michal Piotrowski
2007-03-20 7:17 ` Michal Piotrowski [this message]
2007-03-20 16:36 ` Andrew Morton
2007-03-20 18:22 ` Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45FF8A79.7010201@googlemail.com \
--to=michal.k.k.piotrowski@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.