From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?ISO-8859-2?Q?Micha=B3_Margula?= <alchemyx@uznam.net.pl>
Date: Tue, 20 Mar 2007 13:20:30 +0000
Subject: [LARTC] TC Filter matching all
Message-Id: <45FFDF9E.4090208@uznam.net.pl>
List-Id: <lartc.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
To: lartc@vger.kernel.org

Hello!

	I was always using "default" in HTB to choose default class, but now I=20
need to do it with filters. Tried following command:

# tc filter add dev eth0 protocol ip parent 10: prio 2 flowid 10:2
Unknown filter "flowid", hence option "10:2" is unparsable

It is from example in LARTC Howto.

My question is then - how to make a filter matching all without eating=20
too much CPU cycles?

Thanks

--=20
Micha=B3 Margula, alchemyx@uznam.net.pl, http://alchemyx.uznam.net.pl/
"W =BFyciu pi=EAkne s=B1 tylko chwile" [Ryszard Riedel]
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc