From: "signal@embedworld" <ma.jianjie@gmail.com>
To: linuxppc-embedded@ozlabs.org
Subject: ppc32: problems boot the Linux for SBS/K2 board.
Date: Mon, 27 Jun 2005 11:41:06 +0800 [thread overview]
Message-ID: <45d67d710506262041722dab8f@mail.gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 905 bytes --]
Hi,
We had a SBS/K2 board,which had an IBM PowerPC 750 processor with cPCI
interface. The old kernel on the boards worked quite well with Vxworks BSP
and Linux 2.4.2 kernel. But it failed to boot with the new kernel version
2.6.8(I had tested other versions too). Here is the message I got from the
HyperTerminal.
-------------------------------------------------------------
Attaching to ATA disk device... done.
Loading /ata0/tftpboot/zImage.elf...1425876
Starting at 0x800000...
id mach(): done
MMU:enter
MMU:hw init
hash:enter
hash:find piece
hash:patch
hash:done
MMU:mapin
MMU:setio
MMU:exit
setup_arch: enter
setup_arch: bootmem
arch: exit
-----------------------------------
What's the problems of these failure?
Does anybody here had succeeded booting the 2.6 kernel for SBS/K2 boards?
Thanks in advanced!
Jianjie Ma
2005.6.27
[-- Attachment #2: Type: text/html, Size: 1092 bytes --]
next reply other threads:[~2005-06-27 3:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-27 3:41 signal@embedworld [this message]
[not found] <20050622020003.7882267B4C@ozlabs.org>
2005-06-27 2:25 ` ppc32: problems boot the Linux for SBS/K2 board signal@embedworld
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45d67d710506262041722dab8f@mail.gmail.com \
--to=ma.jianjie@gmail.com \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.