From: krzysztof.h1@wp.pl (Krzysztof Helt)
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] [PATCH] THMC50/ADM1022 support for 2.6 kernel
Date: Fri, 23 Feb 2007 07:16:28 +0000 [thread overview]
Message-ID: <45de94cc79ae0@wp.pl> (raw)
This patch adds support for Texas Instruments THMC50 and its
clone Analog Devices ADM1022. It support temperature sensors and
fan control on the chip. The ADM1022 chip works only in 2 remote
temperature sensors mode.
Signed-off-by: Krzysztof Helt <krzysztof.h1 at wp.pl>
---
The THMC50 driver is the same as the lmsensor driver with added
fan control and fix that enables the fan (the fan off signal is
always set in the original driver).
The ADM1022 driver works only with 2 remote sensors. Otherwise,
the fans are forced to full speed on the Compaq AP550. The
ADM1022 driver has no way currently to switch the ADM1022 sensor
into the THMC50 mode (with only 1 remote temperature sensor).
I may extend functionality of this driver later (as time and kids
allow).
Regards,
Krzysztof
PS. This driver was diffed against 2.6.20 and do not apply
cleanly to 2.6.21-rc1. It applies correctly, but there are some
messages about line numbers.
----------------------------------------------------
Mistrzostwa Polski w ?lizgu Na Bele Czym 2007,
tego jeszcze nie widzia?e? :)
http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fd76.html&sid\x1028
-------------- next part --------------
A non-text attachment was scrubbed...
Name: thmc50.patch
Type: text/x-patch
Size: 15606 bytes
Desc: not available
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20070223/5ca06dba/attachment-0001.bin
reply other threads:[~2007-02-23 7:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45de94cc79ae0@wp.pl \
--to=krzysztof.h1@wp.pl \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.