From mboxrd@z Thu Jan 1 00:00:00 1970 From: krzysztof.h1@wp.pl (Krzysztof Helt) Date: Wed, 28 Feb 2007 08:18:39 +0000 Subject: [lm-sensors] Odp: [PATCH] THMC50/ADM1022 support for 2.6 kernel Message-Id: <45e53adf50e8f@wp.pl> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Dnia 23-02-2007 o godz. 8:16 Krzysztof Helt napisa?(a): > This patch adds support for Texas Instruments THMC50 and its > clone Analog Devices ADM1022. It support temperature sensors and > fan control on the chip. The ADM1022 chip works only in 2 remote > temperature sensors mode. > Bump. Any comments to this patch? Another question: what is a correct settings for stopping a fan. If I set pwm1_enable to 1 and pwm1 to 0 the fan does not stop (the 0 value in the chip does not mean stop - just the minimum speed). There is a separate bit for stopping the fan (which really stops the fan). How to implement this? BTW. The pwm1_mode is always set to 0 (DC), because it how the chip handles it. If this patch is applied I can send some enhancements (fan stopping, ADM1022 mode choosing). Regards, Krzysztof ---------------------------------------------------- Wielkanocna oferta - ?pisz 2 noce p?acisz za 1 - Kliknij: http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fd83.html&sid39