From mboxrd@z Thu Jan 1 00:00:00 1970 From: Curt.Blank@curtronics.com (Curt Blank) Date: Wed, 21 Mar 2007 01:44:31 +0000 Subject: [lm-sensors] MSI K9N4 SLI-F sensors-detect says use Message-Id: <46008DFF.5020907@curtronics.com> List-Id: References: <20070320181903.A0F4F4DA8@mta-fe.casema.nl> In-Reply-To: <20070320181903.A0F4F4DA8@mta-fe.casema.nl> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org In the meantime.... Winbond W83627DHG http://www.curtronics.com/Pics/MSI_K9N4_SLI-F_Winbond.jpg How's that for Hi-Res. Couldn't use a flash and lighting was a bitch (running server). -Curt Jan van Tiggelen wrote: >OK, the question is out to MSI. I expect it to take up to about a day or 2 >before we have the full answer. > >Will post back to you in a personal message when I get the schematics. > >Kind regards, > >Jan van Tiggelen > > >-----Original Message----- >From: Curt Blank [mailto:curt at curtronics.com] >Sent: Tuesday, March 20, 2007 7:44 PM >To: David Hubbard >Cc: Jan van Tiggelen; lm-sensors at lm-sensors.org >Subject: Re: [lm-sensors] MSI K9N4 SLI-F sensors-detect says use >w83627ehfbut it won't load > >Jan/David > >Thanks! Man you guys are great. > >I built this server so I am familiar with the MB but it sounds like Jan >has the answer. > >I did try installing all the Winbond drivers one at a time but no luck. > >-Curt > >On Tue, 20 Mar 2007, David Hubbard wrote: > > > >>Hi Jan, >> >>On 3/20/07, Jan van Tiggelen wrote: >> >> >>>Curt / David, >>> >>>Would it be of any help if you get a full spec of the motherboard, >>> >>> >including > > >>>the schematics? I have access to that. >>> >>>That way you don't need to take the server apart, and you can be sure >>> >>> >that > > >>>the chip is used exactly for what purpose you would expect. >>> >>>Kind regards, >>> >>>Jan van Tiggelen >>> >>> >>Yes, that would be the best way. >> >>David >> >> >> >>