From: "Mathieu Bérard" <Mathieu.Berard@crans.org>
To: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>, Robert Hancock <hancockr@shaw.ca>,
linux-kernel <linux-kernel@vger.kernel.org>,
linux-ide@vger.kernel.org, Andrew Morton <akpm@osdl.org>,
Jens Axboe <jens.axboe@oracle.com>,
"Eric D. Mudama" <edmudama@gmail.com>
Subject: Re: [PATCH] libata: add NCQ blacklist entries from Silicon Image Windows driver
Date: Wed, 21 Mar 2007 13:52:35 +0100 [thread overview]
Message-ID: <46012A93.7000302@crans.org> (raw)
In-Reply-To: <4600DF90.3030902@gmail.com>
Tejun Heo a écrit :
> Jeff Garzik wrote:
>
> Mathieu, just to be sure, can you post the result of 'hdparm -I
> /dev/sdX' and 'lspci -nn'?
>
Hi,
no problem :
lspci -nn:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML
Express Processor to DRAM Controller [8086:2590] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI
Express Root Port [8086:2591] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 1 [8086:2660] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 2 [8086:2662] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev d3)
00:1e.2 Multimedia audio controller [0401]: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e]
(rev 03)
00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) AC'97 Modem Controller [8086:266d] (rev 03)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC
Interface Bridge [8086:2641] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) IDE Controller [8086:266f] (rev 03)
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA
Controller [8086:2653] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) SMBus Controller [8086:266a] (rev 03)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M24
[Radeon Mobility X600] [1002:5462]
06:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
06:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG
Network Connection [8086:4220] (rev 05)
06:04.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus
Controller [104c:8031]
06:04.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant
IEEE 1394 Host Controller [104c:8032]
06:04.3 Mass storage controller [0180]: Texas Instruments PCIxx21
Integrated FlashMedia Controller [104c:8033]
06:04.4 Generic system peripheral [0805]: Texas Instruments
PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
[104c:8034]
hdparm -I /dev/sda:
/dev/sda:
ATA device, with non-removable media
Model Number: HTS541010G9SA00
Serial Number: MP2ZM4X0GSWJKR
Firmware Revision: MBZOC60D
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 1
Supported: 7 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 195371568
LBA48 user addressable sectors: 195371568
device size with M = 1024*1024: 95396 MBytes
device size with M = 1000*1000: 100030 MBytes (100 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
Advanced power management level: 128 (0x80)
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* IDLE_IMMEDIATE with UNLOAD
* SATA-I signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
Non-Zero buffer offsets in DMA Setup FIS
DMA Setup Auto-Activate optimization
Device-initiated interface power management
In-order data delivery
* Software settings preservation
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
64min for SECURITY ERASE UNIT.
Checksum: correct
--
Mathieu
prev parent reply other threads:[~2007-03-21 12:53 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-22 5:48 [PATCH] libata: add NCQ blacklist entries from Silicon Image Windows driver Robert Hancock
2007-02-22 6:57 ` Jeff Garzik
2007-02-22 11:32 ` Jens Axboe
2007-02-22 14:41 ` Mark Lord
2007-02-22 15:41 ` Jens Axboe
2007-02-22 15:04 ` Ask Bjørn Hansen
2007-02-23 0:18 ` Robert Hancock
2007-02-23 0:21 ` Ask Bjørn Hansen
2007-02-23 22:16 ` Jeff Garzik
2007-03-21 7:32 ` Tejun Heo
2007-03-21 12:52 ` Mathieu Bérard [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46012A93.7000302@crans.org \
--to=mathieu.berard@crans.org \
--cc=akpm@osdl.org \
--cc=edmudama@gmail.com \
--cc=hancockr@shaw.ca \
--cc=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=jens.axboe@oracle.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.