From: "Matías Alejandro Torres" <torresmat@gmail.com>
To: Tejun Heo <htejun@gmail.com>
Cc: linux-ide@vger.kernel.org
Subject: Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
Date: Tue, 27 Mar 2007 01:00:24 -0300 [thread overview]
Message-ID: <460896D8.8040203@gmail.com> (raw)
In-Reply-To: <460883FB.1030000@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 7703 bytes --]
> Can you try with kernel parameter 'acpi=noirq' or 'irqpoll'?
I made a typo when passing the irqpoll parameter to the kernel. In
kernel 2.6.20.4 with the irqpoll parameter passewd to kernel the SATA
disk works:
[ 1.320000] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 1.320000] ahci 0000:00:12.0: version 2.0
[ 1.320000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level,
low) -> IRQ 16
[ 2.324000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps
0xf impl SATA mode
[ 2.324000] ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp
pio slum part
[ 2.324000] ata1: SATA max UDMA/133 cmd 0xF8824D00 ctl 0x0 bmdma 0x0
irq 222
[ 2.324000] ata2: SATA max UDMA/133 cmd 0xF8824D80 ctl 0x0 bmdma 0x0
irq 222
[ 2.324000] ata3: SATA max UDMA/133 cmd 0xF8824E00 ctl 0x0 bmdma 0x0
irq 222
[ 2.324000] ata4: SATA max UDMA/133 cmd 0xF8824E80 ctl 0x0 bmdma 0x0
irq 222
[ 2.324000] scsi0 : ahci
[ 2.636000] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.636000] scsi1 : ahci
[ 3.120000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.136000] ata2.00: ATA-7, max UDMA/133, 160836480 sectors: LBA48
NCQ (depth 31/32)
[ 3.136000] ata2.00: ata2: dev 0 multi count 16
[ 3.144000] ata2.00: configured for UDMA/133
[ 3.144000] scsi2 : ahci
[ 3.456000] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.456000] scsi3 : ahci
[ 3.768000] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.768000] scsi 1:0:0:0: Direct-Access ATA HDS728080PLA380
PF2O PQ: 0 ANSI: 5
[ 3.768000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 3.768000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.768000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.768000] mice: PS/2 mouse device common for all mice
[ 3.768000] EISA: Probing bus 0 at eisa.0
[ 3.768000] EISA: Detected 0 cards.
[ 3.792000] input: AT Translated Set 2 keyboard as /class/input/input0
[ 3.800000] TCP cubic registered
[ 3.800000] NET: Registered protocol family 1
[ 3.800000] Starting balanced_irq
[ 3.800000] Using IPI No-Shortcut mode
[ 3.800000] ACPI: (supports S0 S1 S3 S4 S5)
[ 3.800000] Freeing unused kernel memory: 316k freed
[ 3.804000] Time: hpet clocksource has been installed.
[ 3.876000] ACPI: duty_cycle spans bit 4
[ 4.268000] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
[ 4.268000] sda: Write Protect is off
[ 4.268000] sda: Mode Sense: 00 3a 00 00
[ 4.268000] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.268000] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
[ 4.268000] sda: Write Protect is off
[ 4.268000] sda: Mode Sense: 00 3a 00 00
[ 4.268000] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.268000] sda: sda1
[ 4.292000] sd 1:0:0:0: Attached scsi disk sda
And the disk (lshw):
*-storage
description: SATA controller
product: SB600 Non-Raid-5 SATA
vendor: ATI Technologies Inc
physical id: 12
bus info: pci@00:12.0
logical name: scsi1
version: 00
width: 32 bits
clock: 66MHz
capabilities: storage ahci_1.0 bus_master cap_list emulated
configuration: driver=ahci
resources: ioport:e800-e807 ioport:e400-e403
ioport:e000-e007 ioport:dc00-dc03 ioport:d800-d80f
iomemory:febffc00-febfffff irq:222
*-disk
description: SCSI Disk
product: HDS728080PLA380
vendor: ATA
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/sda
version: PF2O
serial: PFDH37SYTWKR9E
size: 76GB
capabilities: partitioned partitioned:dos
configuration: ansiversion=5
Nice isn't it? I'm happy.
In the 2.6.21-rc5 version this hasn't worked (the typo was here too,
copy, paste & destroy :P). Here's is the output of dmesg:
[ 1.336000] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 1.340000] ahci 0000:00:12.0: version 2.1
[ 1.340000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level,
low) -> IRQ 16
[ 2.344000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps
0xf impl SATA mode
[ 2.344000] ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp
pio slum part
[ 2.344000] ata1: SATA max UDMA/133 cmd 0xf8824d00 ctl 0x00000000
bmdma 0x00000000 irq 222
[ 2.344000] ata2: SATA max UDMA/133 cmd 0xf8824d80 ctl 0x00000000
bmdma 0x00000000 irq 222
[ 2.344000] ata3: SATA max UDMA/133 cmd 0xf8824e00 ctl 0x00000000
bmdma 0x00000000 irq 222
[ 2.344000] ata4: SATA max UDMA/133 cmd 0xf8824e80 ctl 0x00000000
bmdma 0x00000000 irq 222
[ 2.344000] scsi0 : ahci
[ 2.656000] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.656000] scsi1 : ahci
[ 3.140000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 33.140000] ata2.00: qc timeout (cmd 0xec)
[ 33.140000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
[ 34.120000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 64.120000] ata2.00: qc timeout (cmd 0xec)
[ 64.120000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
[ 64.120000] ata2.00: limiting speed to UDMA7:PIO5
[ 65.100000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 95.100000] ata2.00: qc timeout (cmd 0xec)
[ 95.100000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
[ 96.080000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 96.080000] scsi2 : ahci
[ 96.392000] ata3: SATA link down (SStatus 0 SControl 300)
[ 96.392000] scsi3 : ahci
[ 96.704000] ata4: SATA link down (SStatus 0 SControl 300)
[ 96.704000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 96.704000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 96.704000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 96.704000] mice: PS/2 mouse device common for all mice
[ 96.704000] EISA: Probing bus 0 at eisa.0
[ 96.704000] EISA: Detected 0 cards.
[ 96.704000] TCP cubic registered
[ 96.704000] NET: Registered protocol family 1
[ 96.704000] Starting balanced_irq
[ 96.704000] Using IPI No-Shortcut mode
[ 96.708000] Freeing unused kernel memory: 332k freed
[ 96.724000] input: AT Translated Set 2 keyboard as /class/input/input0
[ 96.780000] ACPI: duty_cycle spans bit 4
[ 97.236000] SB600_PATA: IDE controller at PCI slot 0000:00:14.1
[ 97.240000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level,
low) -> IRQ 17
[ 97.240000] SB600_PATA: chipset revision 0
[ 97.240000] SB600_PATA: not 100% native mode: will probe irqs later
[ 97.240000] ide0: BM-DMA at 0xff00-0xff07, BIOS settings:
hda:DMA, hdb:DMA
[ 97.240000] Probing IDE interface ide0...
[ 97.528000] hda: HDS728080PLAT20, ATA DISK drive
[ 97.976000] hdb: ASUS DRW-1608P3S, ATAPI CD/DVD-ROM drive
[ 98.032000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 98.052000] hda: max request size: 512KiB
[ 98.056000] hda: 160836480 sectors (82348 MB) w/1719KiB Cache,
CHS=16383/255/63, UDMA(100)
[ 98.056000] hda: cache flushes supported
[ 98.056000] hda: hda1 hda2 < hda5 hda6 >
[ 98.108000] hdb: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB
Cache, UDMA(66)
[ 98.108000] Uniform CD-ROM driver Revision: 3.20
[ 98.356000] Probing IDE interface ide1...
Why this happens? Any clue?
I attached those files too so you can take a better look at them. Thanks!
Matías
[-- Attachment #2: dmesg.2.6.20.4.irqpoll --]
[-- Type: text/plain, Size: 22703 bytes --]
[ 0.000000] Linux version 2.6.20.4 (root@matias) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #1 SMP Sat Mar 24 13:19:32 ART 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fec0000 end: 000000003ffc0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003ffc0000 size: 000000000000e000 end: 000000003ffce000 type: 3
[ 0.000000] copy_e820_map() start: 000000003ffce000 size: 0000000000032000 end: 0000000040000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffce000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262080) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262080
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262080
[ 0.000000] On node 0 totalpages: 262080
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32449 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f84e0
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x07000604 MSFT 0x00000097) @ 0x3ffc0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x07000604 MSFT 0x00000097) @ 0x3ffc0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x07000604 MSFT 0x00000097) @ 0x3ffc0390
[ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x07000604 MSFT 0x00000097) @ 0x3ffc03f0
[ 0.000000] ACPI: WDRT (v001 A M I OEMWDRT 0x07000604 MSFT 0x00000097) @ 0x3ffc0430
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x07000604 MSFT 0x00000097) @ 0x3ffce040
[ 0.000000] ACPI: HPET (v001 A M I OEMHPET 0x07000604 MSFT 0x00000097) @ 0x3ffc4250
[ 0.000000] ACPI: SSDT (v001 A M I ACPI2PPC 0x00000001 AMI 0x00000001) @ 0x3ffc4290
[ 0.000000] ACPI: DSDT (v001 AMMR_ AMMR_B36 0x00000b36 INTL 0x20051117) @ 0x00000000
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:11 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8000 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
[ 0.000000] Detected 2000.179 MHz processor.
[ 22.317443] Built 1 zonelists. Total pages: 260033
[ 22.317446] Kernel command line: root=/dev/hda5 ro irqpoll
[ 22.317459] Misrouted IRQ fixup and polling support enabled
[ 22.317461] This may significantly impact system performance
[ 22.317571] mapped APIC to ffffd000 (fee00000)
[ 22.317574] mapped IOAPIC to ffffc000 (fec00000)
[ 22.317576] Enabling fast FPU save and restore... done.
[ 22.317579] Enabling unmasked SIMD FPU exception support... done.
[ 22.317586] Initializing CPU#0
[ 22.317638] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 22.319942] Console: colour VGA+ 80x25
[ 22.323228] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 22.324041] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 22.344370] Memory: 1029668k/1048320k available (2078k kernel code, 17936k reserved, 958k data, 316k init, 130816k highmem)
[ 22.344452] virtual kernel memory layout:
[ 22.344453] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 22.344454] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 22.344456] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 22.344457] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 22.344458] .init : 0xc03fe000 - 0xc044d000 ( 316 kB)
[ 22.344459] .data : 0xc0307bb4 - 0xc03f76f4 ( 958 kB)
[ 22.344460] .text : 0xc0100000 - 0xc0307bb4 (2078 kB)
[ 22.344905] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 22.345149] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 22.345408] hpet0: 4 32-bit timers, 14318180 Hz
[ 22.346467] Using HPET for base-timer
[ 22.425010] Calibrating delay using timer specific routine.. 4009.85 BogoMIPS (lpj=8019714)
[ 22.425158] Security Framework v1.0.0 initialized
[ 22.425219] SELinux: Disabled at boot.
[ 22.425285] Mount-cache hash table entries: 512
[ 22.425462] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
[ 22.425470] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 22.425529] CPU: L2 Cache: 256K (64 bytes/line)
[ 22.425586] CPU 0(2) -> Core 0
[ 22.425640] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
[ 22.425649] Compat vDSO mapped to ffffe000.
[ 22.425712] Checking 'hlt' instruction... OK.
[ 22.441159] SMP alternatives: switching to UP code
[ 22.441408] ACPI: Core revision 20060707
[ 22.444005] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02
[ 22.444165] SMP alternatives: switching to SMP code
[ 22.444338] Booting processor 1/1 eip 3000
[ 22.454283] Initializing CPU#1
[ 22.532516] Calibrating delay using timer specific routine.. 4000.22 BogoMIPS (lpj=8000442)
[ 22.532523] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
[ 22.532529] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 22.532531] CPU: L2 Cache: 256K (64 bytes/line)
[ 22.532533] CPU 1(2) -> Core 1
[ 22.532534] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
[ 22.532881] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02
[ 22.533317] Total of 2 processors activated (8010.07 BogoMIPS).
[ 22.533516] ENABLING IO-APIC IRQs
[ 22.533737] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 22.680517] checking TSC synchronization across 2 CPUs:
[ 0.000051] CPU#0 had 136 usecs TSC skew, fixed it up.
[ 0.000107] CPU#1 had -136 usecs TSC skew, fixed it up.
[ 0.003947] Brought up 2 CPUs
[ 0.044808] migration_cost=140
[ 0.045232] NET: Registered protocol family 16
[ 0.045366] EISA bus registered
[ 0.045422] ACPI: bus type pci registered
[ 0.045485] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[ 0.045543] PCI: Not using MMCONFIG.
[ 0.046366] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 0.046424] PCI: Using configuration type 1
[ 0.046480] Setting up standard PCI resources
[ 0.087854] ACPI: Interpreter enabled
[ 0.087914] ACPI: Using IOAPIC for interrupt routing
[ 0.088279] Error attaching device data
[ 0.088338] Error attaching device data
[ 0.088505] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.088563] PCI: Probing PCI hardware (bus 00)
[ 0.090772] 0000:00:14.1: trying to change BAR0 from 0000 to 01F0
[ 0.090832] 0000:00:14.1: trying to change BAR1 from 0000 to 03F4
[ 0.090891] 0000:00:14.1: trying to change BAR2 from 0000 to 0170
[ 0.090951] 0000:00:14.1: trying to change BAR3 from 0000 to 0374
[ 0.091286] Boot video device is 0000:01:00.0
[ 0.091482] PCI: Transparent bridge - 0000:00:14.4
[ 0.091565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.114083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.116956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.118242] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.119028] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.119818] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.120598] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.121380] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.122161] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[ 0.122609] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.123390] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.124123] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.124188] pnp: PnP ACPI init
[ 0.128327] pnp: PnP ACPI: found 17 devices
[ 0.128388] PnPBIOS: Disabled by ACPI PNP
[ 0.128575] SCSI subsystem initialized
[ 0.128663] libata version 2.00 loaded.
[ 0.128693] PCI: Using ACPI for IRQ routing
[ 0.128750] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.137872] NET: Registered protocol family 8
[ 0.137928] NET: Registered protocol family 20
[ 0.138863] pnp: 00:0e: ioport range 0xa00-0xa0f has been reserved
[ 0.138922] pnp: 00:0e: ioport range 0x600-0x60f has been reserved
[ 0.139192] PCI: Bridge: 0000:00:02.0
[ 0.139247] IO window: disabled.
[ 0.139304] MEM window: fa900000-fe9fffff
[ 0.139361] PREFETCH window: bff00000-dfefffff
[ 0.139419] PCI: Bridge: 0000:00:14.4
[ 0.139475] IO window: b000-bfff
[ 0.139533] MEM window: fea00000-feafffff
[ 0.139591] PREFETCH window: 50000000-500fffff
[ 0.139661] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.139714] NET: Registered protocol family 2
[ 0.175689] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.175896] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.177008] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.177578] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.177639] TCP reno registered
[ 0.187722] checking if image is initramfs... it is
[ 0.602396] Freeing initrd memory: 5076k freed
[ 0.840000] audit: initializing netlink socket (disabled)
[ 0.840000] audit(1174956175.024:1): initialized
[ 0.840000] highmem bounce pool size: 64 pages
[ 0.840000] VFS: Disk quotas dquot_6.5.1
[ 0.840000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.840000] io scheduler noop registered
[ 0.840000] io scheduler anticipatory registered
[ 0.840000] io scheduler deadline registered
[ 0.840000] io scheduler cfq registered (default)
[ 0.940000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.940000] assign_interrupt_mode Found MSI capability
[ 0.940000] Allocate Port Service[0000:00:02.0:pcie00]
[ 0.940000] isapnp: Scanning for PnP cards...
[ 1.292000] isapnp: No Plug & Play device found
[ 1.320000] Real Time Clock Driver v1.12ac
[ 1.320000] hpet_resources: 0xfed00000 is busy
[ 1.320000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.320000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.320000] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.320000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.320000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.320000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.320000] ahci 0000:00:12.0: version 2.0
[ 1.320000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16
[ 2.324000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.324000] ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part
[ 2.324000] ata1: SATA max UDMA/133 cmd 0xF8824D00 ctl 0x0 bmdma 0x0 irq 222
[ 2.324000] ata2: SATA max UDMA/133 cmd 0xF8824D80 ctl 0x0 bmdma 0x0 irq 222
[ 2.324000] ata3: SATA max UDMA/133 cmd 0xF8824E00 ctl 0x0 bmdma 0x0 irq 222
[ 2.324000] ata4: SATA max UDMA/133 cmd 0xF8824E80 ctl 0x0 bmdma 0x0 irq 222
[ 2.324000] scsi0 : ahci
[ 2.636000] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.636000] scsi1 : ahci
[ 3.120000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.136000] ata2.00: ATA-7, max UDMA/133, 160836480 sectors: LBA48 NCQ (depth 31/32)
[ 3.136000] ata2.00: ata2: dev 0 multi count 16
[ 3.144000] ata2.00: configured for UDMA/133
[ 3.144000] scsi2 : ahci
[ 3.456000] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.456000] scsi3 : ahci
[ 3.768000] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.768000] scsi 1:0:0:0: Direct-Access ATA HDS728080PLA380 PF2O PQ: 0 ANSI: 5
[ 3.768000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 3.768000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.768000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.768000] mice: PS/2 mouse device common for all mice
[ 3.768000] EISA: Probing bus 0 at eisa.0
[ 3.768000] EISA: Detected 0 cards.
[ 3.792000] input: AT Translated Set 2 keyboard as /class/input/input0
[ 3.800000] TCP cubic registered
[ 3.800000] NET: Registered protocol family 1
[ 3.800000] Starting balanced_irq
[ 3.800000] Using IPI No-Shortcut mode
[ 3.800000] ACPI: (supports S0 S1 S3 S4 S5)
[ 3.800000] Freeing unused kernel memory: 316k freed
[ 3.804000] Time: hpet clocksource has been installed.
[ 3.876000] ACPI: duty_cycle spans bit 4
[ 4.268000] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
[ 4.268000] sda: Write Protect is off
[ 4.268000] sda: Mode Sense: 00 3a 00 00
[ 4.268000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.268000] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
[ 4.268000] sda: Write Protect is off
[ 4.268000] sda: Mode Sense: 00 3a 00 00
[ 4.268000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.268000] sda: sda1
[ 4.292000] sd 1:0:0:0: Attached scsi disk sda
[ 4.516000] SB600_PATA: IDE controller at PCI slot 0000:00:14.1
[ 4.516000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17
[ 4.516000] SB600_PATA: chipset revision 0
[ 4.520000] SB600_PATA: not 100% native mode: will probe irqs later
[ 4.520000] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
[ 4.520000] Probing IDE interface ide0...
[ 4.808000] hda: HDS728080PLAT20, ATA DISK drive
[ 5.256000] hdb: ASUS DRW-1608P3S, ATAPI CD/DVD-ROM drive
[ 5.312000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.316000] hda: max request size: 512KiB
[ 5.328000] hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(33)
[ 5.328000] hda: cache flushes supported
[ 5.328000] hda: hda1 hda2 < hda5 hda6 >
[ 5.388000] hdb: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(66)
[ 5.392000] Uniform CD-ROM driver Revision: 3.20
[ 5.692000] Probing IDE interface ide1...
[ 5.724000] usbcore: registered new interface driver usbfs
[ 5.724000] usbcore: registered new interface driver hub
[ 5.724000] usbcore: registered new device driver usb
[ 5.724000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 5.724000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 5.724000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 5.724000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 5.724000] ohci_hcd 0000:00:13.0: irq 17, io mem 0xfebfe000
[ 5.784000] usb usb1: configuration #1 chosen from 1 choice
[ 5.784000] hub 1-0:1.0: USB hub found
[ 5.784000] hub 1-0:1.0: 2 ports detected
[ 5.888000] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 18
[ 5.888000] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 5.888000] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2
[ 5.888000] ehci_hcd 0000:00:13.5: debug port 1
[ 5.888000] ehci_hcd 0000:00:13.5: irq 18, io mem 0xfebff800
[ 5.888000] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.888000] usb usb2: configuration #1 chosen from 1 choice
[ 5.888000] hub 2-0:1.0: USB hub found
[ 5.888000] hub 2-0:1.0: 10 ports detected
[ 5.992000] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 19
[ 5.992000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 5.992000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 5.992000] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfebfd000
[ 6.052000] usb usb3: configuration #1 chosen from 1 choice
[ 6.052000] hub 3-0:1.0: USB hub found
[ 6.052000] hub 3-0:1.0: 2 ports detected
[ 6.156000] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 6.156000] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 6.156000] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 6.156000] ohci_hcd 0000:00:13.2: irq 20, io mem 0xfebfc000
[ 6.216000] usb usb4: configuration #1 chosen from 1 choice
[ 6.216000] hub 4-0:1.0: USB hub found
[ 6.216000] hub 4-0:1.0: 2 ports detected
[ 6.320000] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 19
[ 6.320000] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 6.320000] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 6.320000] ohci_hcd 0000:00:13.3: irq 19, io mem 0xfebfb000
[ 6.380000] usb usb5: configuration #1 chosen from 1 choice
[ 6.380000] hub 5-0:1.0: USB hub found
[ 6.380000] hub 5-0:1.0: 2 ports detected
[ 6.484000] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 20
[ 6.484000] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 6.484000] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 6.484000] ohci_hcd 0000:00:13.4: irq 20, io mem 0xfebfa000
[ 6.544000] usb usb6: configuration #1 chosen from 1 choice
[ 6.544000] hub 6-0:1.0: USB hub found
[ 6.544000] hub 6-0:1.0: 2 ports detected
[ 6.716000] Attempting manual resume
[ 6.736000] kjournald starting. Commit interval 5 seconds
[ 6.736000] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.968000] Floppy drive(s): fd0 is 1.44M
[ 16.984000] FDC 0 is a post-1991 82077
[ 17.328000] input: PC Speaker as /class/input/input1
[ 17.884000] Linux agpgart interface v0.101 (c) Dave Jones
[ 17.900000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.904000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.952000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 17.988000] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 17.988000] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 17.988000] eth0: RTL8169sc/8110sc at 0xf8896800, 00:16:17:c3:b8:f9, IRQ 21
[ 18.036000] parport: PnPBIOS parport detected.
[ 18.036000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 18.112000] r8169: eth0: link down
[ 18.236000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17
[ 18.436000] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 18.656000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[ 18.728000] lp0: using parport0 (interrupt-driven).
[ 18.856000] Adding 1052216k swap on /dev/disk/by-uuid/ba363ce4-0f51-4ff4-abdb-c02e7467cc43. Priority:-1 extents:1 across:1052216k
[ 18.980000] EXT3 FS on hda5, internal journal
[ 19.200000] NET: Registered protocol family 17
[ 19.380000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 19.576000] r8169: eth0: link up
[ 19.728000] NTFS volume version 3.1.
[ 22.372000] input: Power Button (FF) as /class/input/input3
[ 22.372000] ACPI: Power Button (FF) [PWRF]
[ 22.376000] input: Power Button (CM) as /class/input/input4
[ 22.376000] ACPI: Power Button (CM) [PWRB]
[ 22.404000] Using specific hotkey driver
[ 22.468000] No dock devices found.
[ 22.508000] ibm_acpi: ec object not found
[ 22.576000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 22.888000] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ processors (version 2.00.00)
[ 22.888000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe
[ 22.888000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10
[ 22.888000] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 26.448000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 26.448000] apm: disabled - APM is not SMP safe.
[ 27.332000] NET: Registered protocol family 10
[ 27.332000] lo: Disabled Privacy Extensions
[ 32.412000] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 32.872000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 33.008000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 33.012000] NFSD: starting 90-second grace period
[ 37.488000] eth0: no IPv6 routers present
[-- Attachment #3: dmesg.2.6.21-rc5.irqpoll --]
[-- Type: text/plain, Size: 23470 bytes --]
[ 0.000000] Linux version 2.6.21-rc5 (root@matias) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #1 SMP Sun Mar 25 23:25:22 ART 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fec0000 end: 000000003ffc0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003ffc0000 size: 000000000000e000 end: 000000003ffce000 type: 3
[ 0.000000] copy_e820_map() start: 000000003ffce000 size: 0000000000032000 end: 0000000040000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffce000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262080) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262080
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262080
[ 0.000000] On node 0 totalpages: 262080
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32449 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F84E0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FFC0000, 0040 (r1 A M I OEMRSDT 7000604 MSFT 97)
[ 0.000000] ACPI: FACP 3FFC0200, 0084 (r2 A M I OEMFACP 7000604 MSFT 97)
[ 0.000000] ACPI: DSDT 3FFC0480, 3DC9 (r1 AMMR_ AMMR_B36 B36 INTL 20051117)
[ 0.000000] ACPI: FACS 3FFCE000, 0040
[ 0.000000] ACPI: APIC 3FFC0390, 005C (r1 A M I OEMAPIC 7000604 MSFT 97)
[ 0.000000] ACPI: MCFG 3FFC03F0, 003C (r1 A M I OEMMCFG 7000604 MSFT 97)
[ 0.000000] ACPI: WDRT 3FFC0430, 0047 (r1 A M I OEMWDRT 7000604 MSFT 97)
[ 0.000000] ACPI: OEMB 3FFCE040, 0060 (r1 A M I AMI_OEM 7000604 MSFT 97)
[ 0.000000] ACPI: HPET 3FFC4250, 0038 (r1 A M I OEMHPET 7000604 MSFT 97)
[ 0.000000] ACPI: SSDT 3FFC4290, 01C4 (r1 A M I ACPI2PPC 1 AMI 1)
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:11 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8000 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
[ 0.000000] Built 1 zonelists. Total pages: 260033
[ 0.000000] Kernel command line: root=/dev/hda5 ro irqpoll
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2000.238 MHz processor.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1029748k/1048320k available (2099k kernel code, 17928k reserved, 970k data, 332k init, 130816k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.000000] .init : 0xc0406000 - 0xc0459000 ( 332 kB)
[ 0.000000] .data : 0xc030cc9c - 0xc03ff754 ( 970 kB)
[ 0.000000] .text : 0xc0100000 - 0xc030cc9c (2099 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 0.000000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.000000] hpet0: 4 32-bit timers, 14318180 Hz
[ 0.084000] Calibrating delay using timer specific routine.. 4009.58 BogoMIPS (lpj=8019165)
[ 0.084000] Security Framework v1.0.0 initialized
[ 0.084000] SELinux: Disabled at boot.
[ 0.084000] Mount-cache hash table entries: 512
[ 0.084000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
[ 0.084000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084000] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.084000] CPU 0(2) -> Core 0
[ 0.084000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
[ 0.084000] Compat vDSO mapped to ffffe000.
[ 0.084000] Checking 'hlt' instruction... OK.
[ 0.100000] SMP alternatives: switching to UP code
[ 0.100000] ACPI: Core revision 20070126
[ 0.100000] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02
[ 0.100000] SMP alternatives: switching to SMP code
[ 0.100000] Booting processor 1/1 eip 3000
[ 0.112000] Initializing CPU#1
[ 0.192000] Calibrating delay using timer specific routine.. 4000.15 BogoMIPS (lpj=8000314)
[ 0.192000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
[ 0.192000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.192000] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.192000] CPU 1(2) -> Core 1
[ 0.192000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
[ 0.192000] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02
[ 0.192000] Total of 2 processors activated (8009.73 BogoMIPS).
[ 0.192000] ENABLING IO-APIC IRQs
[ 0.192000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.232000] Brought up 2 CPUs
[ 0.272000] migration_cost=4000
[ 0.272000] NET: Registered protocol family 16
[ 0.272000] EISA bus registered
[ 0.272000] ACPI: bus type pci registered
[ 0.272000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[ 0.272000] PCI: Not using MMCONFIG.
[ 0.272000] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 0.272000] PCI: Using configuration type 1
[ 0.272000] Setting up standard PCI resources
[ 0.316000] ACPI: Interpreter enabled
[ 0.316000] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.316000] ACPI: Using IOAPIC for interrupt routing
[ 0.316000] Error attaching device data
[ 0.316000] Error attaching device data
[ 0.324000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.324000] PCI: Probing PCI hardware (bus 00)
[ 0.324000] 0000:00:14.1: trying to change BAR0 from 0000 to 01F0
[ 0.324000] 0000:00:14.1: trying to change BAR1 from 0000 to 03F4
[ 0.324000] 0000:00:14.1: trying to change BAR2 from 0000 to 0170
[ 0.324000] 0000:00:14.1: trying to change BAR3 from 0000 to 0374
[ 0.324000] Boot video device is 0000:01:00.0
[ 0.324000] PCI: Transparent bridge - 0000:00:14.4
[ 0.324000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.324000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.324000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.340000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.340000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.340000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.340000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.340000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.340000] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[ 0.344000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.344000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.344000] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.344000] pnp: PnP ACPI init
[ 0.348000] pnp: PnP ACPI: found 17 devices
[ 0.348000] PnPBIOS: Disabled by ACPI PNP
[ 0.348000] SCSI subsystem initialized
[ 0.348000] libata version 2.20 loaded.
[ 0.348000] PCI: Using ACPI for IRQ routing
[ 0.348000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.356000] NET: Registered protocol family 8
[ 0.356000] NET: Registered protocol family 20
[ 0.356000] pnp: 00:01: iomem range 0x0-0x0 could not be reserved
[ 0.356000] pnp: 00:09: iomem range 0xffb80000-0xffbfffff could not be reserved
[ 0.356000] pnp: 00:09: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 0.356000] pnp: 00:09: iomem range 0xff6ff000-0xff6ff7ff has been reserved
[ 0.356000] pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.356000] pnp: 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.356000] pnp: 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.356000] pnp: 00:0e: ioport range 0xa00-0xa0f has been reserved
[ 0.356000] pnp: 00:0e: ioport range 0x600-0x60f has been reserved
[ 0.356000] pnp: 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.356000] pnp: 00:10: iomem range 0x0-0x9ffff could not be reserved
[ 0.356000] pnp: 00:10: iomem range 0xc0000-0xcffff could not be reserved
[ 0.356000] pnp: 00:10: iomem range 0xe0000-0xfffff could not be reserved
[ 0.356000] pnp: 00:10: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.360000] Time: hpet clocksource has been installed.
[ 0.388000] PCI: Bridge: 0000:00:02.0
[ 0.388000] IO window: disabled.
[ 0.388000] MEM window: fa900000-fe9fffff
[ 0.388000] PREFETCH window: bff00000-dfefffff
[ 0.388000] PCI: Bridge: 0000:00:14.4
[ 0.388000] IO window: b000-bfff
[ 0.388000] MEM window: fea00000-feafffff
[ 0.388000] PREFETCH window: 50000000-500fffff
[ 0.388000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.388000] NET: Registered protocol family 2
[ 0.428000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.428000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 0.428000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.428000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.432000] TCP reno registered
[ 0.444000] checking if image is initramfs... it is
[ 0.852000] Freeing initrd memory: 5020k freed
[ 0.852000] audit: initializing netlink socket (disabled)
[ 0.852000] audit(1174956492.848:1): initialized
[ 0.852000] highmem bounce pool size: 64 pages
[ 0.852000] VFS: Disk quotas dquot_6.5.1
[ 0.852000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.856000] io scheduler noop registered
[ 0.856000] io scheduler anticipatory registered
[ 0.856000] io scheduler deadline registered
[ 0.856000] io scheduler cfq registered (default)
[ 0.956000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.956000] assign_interrupt_mode Found MSI capability
[ 0.956000] Allocate Port Service[0000:00:02.0:pcie00]
[ 0.956000] isapnp: Scanning for PnP cards...
[ 1.308000] isapnp: No Plug & Play device found
[ 1.336000] Real Time Clock Driver v1.12ac
[ 1.336000] hpet_resources: 0xfed00000 is busy
[ 1.336000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.336000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.336000] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.336000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.336000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.336000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.340000] ahci 0000:00:12.0: version 2.1
[ 1.340000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16
[ 2.344000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.344000] ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part
[ 2.344000] ata1: SATA max UDMA/133 cmd 0xf8824d00 ctl 0x00000000 bmdma 0x00000000 irq 222
[ 2.344000] ata2: SATA max UDMA/133 cmd 0xf8824d80 ctl 0x00000000 bmdma 0x00000000 irq 222
[ 2.344000] ata3: SATA max UDMA/133 cmd 0xf8824e00 ctl 0x00000000 bmdma 0x00000000 irq 222
[ 2.344000] ata4: SATA max UDMA/133 cmd 0xf8824e80 ctl 0x00000000 bmdma 0x00000000 irq 222
[ 2.344000] scsi0 : ahci
[ 2.656000] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.656000] scsi1 : ahci
[ 3.140000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 33.140000] ata2.00: qc timeout (cmd 0xec)
[ 33.140000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
[ 34.120000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 64.120000] ata2.00: qc timeout (cmd 0xec)
[ 64.120000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
[ 64.120000] ata2.00: limiting speed to UDMA7:PIO5
[ 65.100000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 95.100000] ata2.00: qc timeout (cmd 0xec)
[ 95.100000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
[ 96.080000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 96.080000] scsi2 : ahci
[ 96.392000] ata3: SATA link down (SStatus 0 SControl 300)
[ 96.392000] scsi3 : ahci
[ 96.704000] ata4: SATA link down (SStatus 0 SControl 300)
[ 96.704000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 96.704000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 96.704000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 96.704000] mice: PS/2 mouse device common for all mice
[ 96.704000] EISA: Probing bus 0 at eisa.0
[ 96.704000] EISA: Detected 0 cards.
[ 96.704000] TCP cubic registered
[ 96.704000] NET: Registered protocol family 1
[ 96.704000] Starting balanced_irq
[ 96.704000] Using IPI No-Shortcut mode
[ 96.708000] Freeing unused kernel memory: 332k freed
[ 96.724000] input: AT Translated Set 2 keyboard as /class/input/input0
[ 96.780000] ACPI: duty_cycle spans bit 4
[ 97.236000] SB600_PATA: IDE controller at PCI slot 0000:00:14.1
[ 97.240000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17
[ 97.240000] SB600_PATA: chipset revision 0
[ 97.240000] SB600_PATA: not 100% native mode: will probe irqs later
[ 97.240000] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
[ 97.240000] Probing IDE interface ide0...
[ 97.528000] hda: HDS728080PLAT20, ATA DISK drive
[ 97.976000] hdb: ASUS DRW-1608P3S, ATAPI CD/DVD-ROM drive
[ 98.032000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 98.052000] hda: max request size: 512KiB
[ 98.056000] hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(100)
[ 98.056000] hda: cache flushes supported
[ 98.056000] hda: hda1 hda2 < hda5 hda6 >
[ 98.108000] hdb: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(66)
[ 98.108000] Uniform CD-ROM driver Revision: 3.20
[ 98.356000] Probing IDE interface ide1...
[ 98.368000] usbcore: registered new interface driver usbfs
[ 98.368000] usbcore: registered new interface driver hub
[ 98.368000] usbcore: registered new device driver usb
[ 98.368000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 98.368000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 98.372000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 98.372000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 98.372000] ohci_hcd 0000:00:13.0: irq 17, io mem 0xfebfe000
[ 98.432000] usb usb1: configuration #1 chosen from 1 choice
[ 98.432000] hub 1-0:1.0: USB hub found
[ 98.432000] hub 1-0:1.0: 2 ports detected
[ 98.536000] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 18
[ 98.536000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 98.536000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 98.536000] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfebfd000
[ 98.596000] usb usb2: configuration #1 chosen from 1 choice
[ 98.596000] hub 2-0:1.0: USB hub found
[ 98.596000] hub 2-0:1.0: 2 ports detected
[ 98.700000] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 98.700000] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 98.700000] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 98.700000] ohci_hcd 0000:00:13.2: irq 19, io mem 0xfebfc000
[ 98.760000] usb usb3: configuration #1 chosen from 1 choice
[ 98.760000] hub 3-0:1.0: USB hub found
[ 98.760000] hub 3-0:1.0: 2 ports detected
[ 98.864000] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 18
[ 98.864000] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 98.864000] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 98.864000] ohci_hcd 0000:00:13.3: irq 18, io mem 0xfebfb000
[ 98.924000] usb usb4: configuration #1 chosen from 1 choice
[ 98.924000] hub 4-0:1.0: USB hub found
[ 98.924000] hub 4-0:1.0: 2 ports detected
[ 99.028000] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 19
[ 99.028000] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 99.028000] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 99.028000] ohci_hcd 0000:00:13.4: irq 19, io mem 0xfebfa000
[ 99.088000] usb usb5: configuration #1 chosen from 1 choice
[ 99.088000] hub 5-0:1.0: USB hub found
[ 99.088000] hub 5-0:1.0: 2 ports detected
[ 99.192000] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 20
[ 99.192000] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 99.192000] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
[ 99.192000] ehci_hcd 0000:00:13.5: debug port 1
[ 99.192000] ehci_hcd 0000:00:13.5: irq 20, io mem 0xfebff800
[ 99.192000] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 99.192000] usb usb6: configuration #1 chosen from 1 choice
[ 99.192000] hub 6-0:1.0: USB hub found
[ 99.192000] hub 6-0:1.0: 10 ports detected
[ 99.328000] Attempting manual resume
[ 99.368000] kjournald starting. Commit interval 5 seconds
[ 99.368000] EXT3-fs: mounted filesystem with ordered data mode.
[ 107.608000] input: PC Speaker as /class/input/input1
[ 107.716000] Floppy drive(s): fd0 is 1.44M
[ 107.772000] FDC 0 is a post-1991 82077
[ 107.776000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 107.796000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 107.856000] Linux agpgart interface v0.102 (c) Dave Jones
[ 107.940000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 108.180000] parport: PnPBIOS parport detected.
[ 108.180000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 108.272000] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 108.272000] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 108.272000] eth0: RTL8169sc/8110sc at 0xf891e800, 00:16:17:c3:b8:f9, IRQ 21
[ 108.344000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17
[ 108.404000] r8169: eth0: link down
[ 108.544000] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 108.828000] lp0: using parport0 (interrupt-driven).
[ 108.888000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[ 108.960000] w83627ehf: unsupported chip ID: 0xffff
[ 109.020000] Adding 1052216k swap on /dev/disk/by-uuid/ba363ce4-0f51-4ff4-abdb-c02e7467cc43. Priority:-1 extents:1 across:1052216k
[ 109.108000] EXT3 FS on hda5, internal journal
[ 109.428000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 109.492000] NTFS volume version 3.1.
[ 109.532000] NET: Registered protocol family 17
[ 109.840000] r8169: eth0: link up
[ 111.800000] input: Power Button (FF) as /class/input/input3
[ 111.800000] ACPI: Power Button (FF) [PWRF]
[ 111.800000] input: Power Button (CM) as /class/input/input4
[ 111.800000] ACPI: Power Button (CM) [PWRB]
[ 111.864000] No dock devices found.
[ 111.892000] ibm_acpi: ec object not found
[ 111.948000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 112.192000] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ processors (version 2.00.00)
[ 112.192000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe
[ 112.192000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10
[ 112.192000] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 113.036000] NET: Registered protocol family 10
[ 113.036000] lo: Disabled Privacy Extensions
[ 114.868000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 114.868000] apm: disabled - APM is not SMP safe.
[ 116.824000] tsdev (compaq touchscreen emulation) is scheduled for removal.
[ 116.824000] See Documentation/feature-removal-schedule.txt for details.
[ 117.616000] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 120.228000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 120.344000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 120.344000] NFSD: starting 90-second grace period
[ 123.444000] eth0: no IPv6 routers present
[ 124.000000] Clocksource tsc unstable (delta = -249947179 ns)
[ 134.036000] ISO 9660 Extensions: RRIP_1991A
[-- Attachment #4: lshw.2.6.20.4.irqpoll --]
[-- Type: text/plain, Size: 16435 bytes --]
matias
description: Desktop Computer
product: MS-7242
vendor: MSI
version: 0A
serial: To Be Filled By O.E.M.
width: 32 bits
capabilities: smbios-2.4 dmi-2.4
configuration: chassis=desktop uuid=00020003-0004-0005-0006-000700080009
*-core
description: Motherboard
product: MS-7242
vendor: MSI
physical id: 0
version: 0A
serial: To be filled by O.E.M.
slot: To Be Filled By O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 080013 (07/04/2006)
size: 64KB
capacity: 448KB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+
vendor: Advanced Micro Devices [AMD]
physical id: 4
bus info: cpu@0
version: 15.11.2
serial: To Be Filled By O.E.M.
slot: CPU 1
size: 1GHz
capacity: 2GHz
width: 64 bits
clock: 200MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt x86-64 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8legacy ts fid vid ttp tm stc cpufreq
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 128KB
capacity: 128KB
capabilities: pipeline-burst internal varies data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 256KB
capacity: 512KB
capabilities: pipeline-burst internal varies unified
*-cache:2 DISABLED
description: L3 cache
physical id: 7
slot: L3-Cache
capabilities: internal
*-memory
description: System Memory
physical id: 28
slot: System board or motherboard
size: 1GB
*-bank:0
description: DIMM Synchronous 266 MHz (3.8 ns)
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
size: 512MB
width: 64 bits
clock: 266MHz (3.7594ns)
*-bank:1
description: DIMM SDRAM [empty]
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
*-bank:2
description: DIMM Synchronous 266 MHz (3.8 ns)
product: PartNum2
vendor: Manufacturer2
physical id: 2
serial: SerNum2
slot: DIMM2
size: 512MB
width: 64 bits
clock: 266MHz (3.7594ns)
*-bank:3
description: DIMM SDRAM [empty]
product: PartNum3
vendor: Manufacturer3
physical id: 3
serial: SerNum3
slot: DIMM3
*-pci:0
description: Host bridge
product: RS480 Host Bridge
vendor: ATI Technologies Inc
physical id: 100
bus info: pci@00:00.0
version: 10
width: 32 bits
clock: 66MHz
*-pci:0
description: PCI bridge
product: RS480 PCI-X Root Port
vendor: ATI Technologies Inc
physical id: 2
bus info: pci@00:02.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master cap_list
configuration: driver=pcieport-driver
*-display
description: VGA compatible controller
product: G71 [GeForce 7300 GS]
vendor: nVidia Corporation
physical id: 0
bus info: pci@01:00.0
version: a1
size: 256MB
width: 64 bits
clock: 33MHz
capabilities: vga bus_master cap_list
resources: iomemory:fd000000-fdffffff iomemory:c0000000-cfffffff iomemory:fc000000-fcffffff irq:10
*-storage
description: SATA controller
product: SB600 Non-Raid-5 SATA
vendor: ATI Technologies Inc
physical id: 12
bus info: pci@00:12.0
logical name: scsi1
version: 00
width: 32 bits
clock: 66MHz
capabilities: storage ahci_1.0 bus_master cap_list emulated
configuration: driver=ahci
resources: ioport:e800-e807 ioport:e400-e403 ioport:e000-e007 ioport:dc00-dc03 ioport:d800-d80f iomemory:febffc00-febfffff irq:222
*-disk
description: SCSI Disk
product: HDS728080PLA380
vendor: ATA
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/sda
version: PF2O
serial: PFDH37SYTWKR9E
size: 76GB
capabilities: partitioned partitioned:dos
configuration: ansiversion=5
*-volume
description: HPFS/NTFS partition
physical id: 1
bus info: scsi@1:0.0.0,1
logical name: /dev/sda1
capacity: 19GB
capabilities: primary bootable
*-usb:0
description: USB Controller
product: SB600 USB (OHCI0)
vendor: ATI Technologies Inc
physical id: 13
bus info: pci@00:13.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master cap_list
configuration: driver=ohci_hcd
resources: iomemory:febfe000-febfefff irq:17
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.20.4 ohci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:1
description: USB Controller
product: SB600 USB (OHCI1)
vendor: ATI Technologies Inc
physical id: 13.1
bus info: pci@00:13.1
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master cap_list
configuration: driver=ohci_hcd
resources: iomemory:febfd000-febfdfff irq:19
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.20.4 ohci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:2
description: USB Controller
product: SB600 USB (OHCI2)
vendor: ATI Technologies Inc
physical id: 13.2
bus info: pci@00:13.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master cap_list
configuration: driver=ohci_hcd
resources: iomemory:febfc000-febfcfff irq:20
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.20.4 ohci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:3
description: USB Controller
product: SB600 USB (OHCI3)
vendor: ATI Technologies Inc
physical id: 13.3
bus info: pci@00:13.3
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master cap_list
configuration: driver=ohci_hcd
resources: iomemory:febfb000-febfbfff irq:19
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.20.4 ohci_hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:4
description: USB Controller
product: SB600 USB (OHCI4)
vendor: ATI Technologies Inc
physical id: 13.4
bus info: pci@00:13.4
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master cap_list
configuration: driver=ohci_hcd
resources: iomemory:febfa000-febfafff irq:20
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.20.4 ohci_hcd
physical id: 1
bus info: usb@6
logical name: usb6
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:5
description: USB Controller
product: SB600 USB Controller (EHCI)
vendor: ATI Technologies Inc
physical id: 13.5
bus info: pci@00:13.5
version: 00
width: 32 bits
clock: 66MHz
capabilities: ehci bus_master cap_list
configuration: driver=ehci_hcd
resources: iomemory:febff800-febff8ff irq:18
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.20.4 ehci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-2.00
configuration: driver=hub maxpower=0mA slots=10 speed=480.0MB/s
*-serial UNCLAIMED
description: SMBus
product: SB600 SMBus
vendor: ATI Technologies Inc
physical id: 14
bus info: pci@00:14.0
version: 13
width: 32 bits
clock: 66MHz
capabilities: cap_list
resources: ioport:b00-b0f
*-ide
description: IDE interface
product: SB600 IDE
vendor: ATI Technologies Inc
physical id: 14.1
bus info: pci@00:14.1
version: 00
width: 32 bits
clock: 66MHz
capabilities: ide bus_master cap_list
configuration: driver=ATIIXP_IDE
resources: ioport:1f0-1f7 ioport:3f4-3f3 ioport:170-177 ioport:374-373 ioport:ff00-ff0f irq:17
*-ide
description: IDE Channel 0
physical id: 0
bus info: ide@0
logical name: ide0
clock: 66MHz
*-disk
description: ATA Disk
product: HDS728080PLAT20
physical id: 0
bus info: ide@0.0
logical name: /dev/hda
version: PF2OA21B
serial: PFD200E1DN2E7B
size: 76GB
capacity: 76GB
capabilities: ata dma lba iordy smart security pm apm partitioned partitioned:dos
configuration: apm=off mode=udma2 smart=on
*-volume:0
description: HPFS/NTFS partition
physical id: 1
bus info: ide@0.0,1
logical name: /dev/hda1
capacity: 18GB
capabilities: primary bootable
*-volume:1
description: W95 Ext'd (LBA) partition
physical id: 2
bus info: ide@0.0,2
logical name: /dev/hda2
capacity: 58GB
capabilities: primary
*-cdrom
description: DVD-RAM writer
product: ASUS DRW-1608P3S
physical id: 1
bus info: ide@0.1
logical name: /dev/hdb
version: 1.24
capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy pm audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: mode=udma4
*-disc
physical id: 0
logical name: /dev/hdb
*-multimedia
description: Audio device
product: SB600 Azalia
vendor: ATI Technologies Inc
physical id: 14.2
bus info: pci@00:14.2
version: 00
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=HDA Intel
resources: iomemory:febf4000-febf7fff irq:17
*-isa UNCLAIMED
description: ISA bridge
product: SB600 PCI to LPC Bridge
vendor: ATI Technologies Inc
physical id: 14.3
bus info: pci@00:14.3
version: 00
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
*-pci:1
description: PCI bridge
product: SB600 PCI to PCI Bridge
vendor: ATI Technologies Inc
physical id: 14.4
bus info: pci@00:14.4
version: 00
width: 32 bits
clock: 66MHz
capabilities: pci subtractive_decode bus_master
*-network
description: Ethernet interface
product: RTL-8110SC/8169SC Gigabit Ethernet
vendor: Realtek Semiconductor Co., Ltd.
physical id: 6
bus info: pci@02:06.0
logical name: eth0
version: 10
serial: 00:16:17:c3:b8:f9
size: 100MB/s
capacity: 1GB/s
width: 32 bits
clock: 66MHz
capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegociation
configuration: autonegociation=on broadcast=yes driver=r8169 driverversion=2.2LK duplex=full ip=192.168.0.2 link=yes multicast=yes port=twisted pair speed=100MB/s
resources: ioport:b800-b8ff iomemory:feaff800-feaff8ff irq:21
*-pci:1
description: Host bridge
product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
vendor: Advanced Micro Devices [AMD]
physical id: 101
bus info: pci@00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:2
description: Host bridge
product: K8 [Athlon64/Opteron] Address Map
vendor: Advanced Micro Devices [AMD]
physical id: 102
bus info: pci@00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:3
description: Host bridge
product: K8 [Athlon64/Opteron] DRAM Controller
vendor: Advanced Micro Devices [AMD]
physical id: 103
bus info: pci@00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:4
description: Host bridge
product: K8 [Athlon64/Opteron] Miscellaneous Control
vendor: Advanced Micro Devices [AMD]
physical id: 104
bus info: pci@00:18.3
version: 00
width: 32 bits
clock: 33MHz
next prev parent reply other threads:[~2007-03-27 4:00 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-27 2:25 SATA SB600 Matías Alejandro Torres
2007-03-27 2:31 ` Tejun Heo
2007-03-27 2:36 ` Matías Alejandro Torres
2007-03-27 2:39 ` Tejun Heo
2007-03-27 4:00 ` Matías Alejandro Torres [this message]
2007-03-27 4:13 ` SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter Tejun Heo
2007-03-27 4:42 ` Matías Alejandro Torres
2007-05-04 9:49 ` Tejun Heo
2007-05-04 13:45 ` Matías Alejandro Torres
2007-05-04 17:48 ` Matías Alejandro Torres
2007-05-04 18:00 ` Tejun Heo
2007-05-04 19:30 ` Matías Alejandro Torres
2007-05-04 19:36 ` Tejun Heo
2007-05-05 17:43 ` Matías Alejandro Torres
2007-05-05 17:55 ` Tejun Heo
2007-05-07 10:03 ` Tejun Heo
2007-05-07 15:12 ` Matías Alejandro Torres
2007-05-07 15:35 ` Tejun Heo
2007-05-07 20:05 ` Matías Alejandro Torres
2007-05-08 8:07 ` Tejun Heo
[not found] ` <46089F28.8060803@gmail.com>
2007-03-27 5:02 ` Tejun Heo
2007-04-13 5:26 ` Tejun Heo
-- strict thread matches above, loose matches on Subject: below --
2007-04-23 21:39 Karsten Vieth
2007-04-23 23:38 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=460896D8.8040203@gmail.com \
--to=torresmat@gmail.com \
--cc=htejun@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.