Re: split raid1 into to arrays

[Bill Davidsen <davidsen@tmr.com>]

Dirk Jagdmann wrote:
> Hello experts,
>
> I have a raid1 array with two drives working. It /dev/md0 built from
> /dev/hda and /dev/hdb. Now I'd like to split it into two array with
> one drive each (and then later add spares to my two arrays again). I
> know that I can remove one drive from the array with: mdadm /dev/md0
> -f /dev/hdb -r /dev/hdb , however I'm not sure what the superblock of
> /dev/hdb now contains and how I could use the contents of /dev/hdb as
> the starting point for my new /dev/md1 array? I did not find anything
> in the manpage of mdadm which would provide me an automatic split.
>
> So what are your advises?
>
The fast way (not redundant):
  You can mark hdb as failed, then remove it. Then you can create a new 
array using hdb and a missing device.

The safe way:
  get your additional drives, call then hdc and hdd just for discussion.
 add hdc to the existing array and let it rebuild, then mark hdb as 
failed and remove. Create a new array from hdb and hdd.

I'm sure someone will tell me if I left out a step.

-- 
bill davidsen <davidsen@tmr.com>
  CTO TMR Associates, Inc
  Doing interesting things with small computers since 1979