From mboxrd@z Thu Jan 1 00:00:00 1970 From: Just Marc Date: Wed, 18 Apr 2007 12:46:26 +0000 Subject: Re: [lm-sensors] lmsensors in 2.6.16 on a Tyan 2882-D motherboard, Message-Id: <46261322.5080005@corky.net> List-Id: References: <44325498.8060805@corky.net> In-Reply-To: <44325498.8060805@corky.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Has Raphael returned? > I will out of office from 4/5 to 4/7. Maybe he meant April 2007 ... :) I'm still getting these weird reading with the latest versions: lmsensors 2.10.3 kernel: 2.6.20.7 Hopefully someone can shed some light. Current output below. Thanks! box:~/lm_sensors-2.10.3# /usr/local/bin/sensors -v sensors version 2.10.3 with libsensors version 2.10.3 box:~/lm_sensors-2.10.3# /usr/local/bin/sensors w83627hf-isa-0290 Adapter: ISA adapter CPU2 Volt: +1.42 V (min = +1.33 V, max = +1.47 V) CPU1 Volt: +1.44 V (min = +1.33 V, max = +1.47 V) 3.3V: +3.30 V (min = +3.14 V, max = +3.47 V) DDR VTT: +1.30 V (min = +2.85 V, max = +3.47 V) ALARM DDR 2.5V: +2.56 V (min = +0.34 V, max = +0.80 V) ALARM CPU2 Fan: 3924 RPM (min = 7670 RPM, div = 8) ALARM CPU1 Fan: 3443 RPM (min = 1430 RPM, div = 8) Fan5: 0 RPM (min = 730 RPM, div = 8) ALARM vid: +1.400 V (VRM Version 2.4) alarms: beep_enable: Sound alarm enabled Rudolf Marek wrote: >> >> w83627hf-isa-0290 >> Adapter: ISA adapter >> +12V: +4.92 V (min = +10.82 V, max = +13.19 V) ALARM >> -12V: -1.59 V (min = -13.18 V, max = -10.80 V) ALARM >> >> I'm mostly concerned about these values, they are not skews ... are >> they just mis-named 5V and 1.5V readings? >> > > > Yes they are, lets wait until Raphael is back. > > regards > Rudolf > _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors