From mboxrd@z Thu Jan 1 00:00:00 1970 From: Robin Gilks Date: Thu, 19 Apr 2007 15:59:42 +1200 Subject: [U-Boot-Users] [GIT PULL] AVR32 update: relocation and acoupleofother things In-Reply-To: <20070416110517.6780626b@dhcp-252-105.norway.atmel.com> References: <20070414160012.34fbdc02@dhcp-252-105.norway.atmel.com><4622C3A0 .3020704@tait.co.nz><20070416110517.6780626b@dhcp-252-105.norway.atmel.com> Message-ID: <4626E92E.9080702@tait.co.nz> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Haavard Skinnemoen wrote: > Please try out the ngw-board branch from > git://www.denx.de/git/u-boot-avr32.git. I'm having some trouble with > flash programming (saveenv doesn't work), so I haven't included it in > the master branch yet, but it's a start. I'm hoping to use the generic > cfi driver instead of the custom stuff soon. > Now that the avr32 branch has been merged (was all of it merged?), are there any outstanding ngw100 changes I should be looking at? I'm expecting my hardware to arrive in a couple of weeks and I'm quite willing to looking into flash problems (I had similar problems with an mpc8xx a couple of years ago!!). As I explained before, my knowledge of git and cogito (which I prefer since it makes a bit more sense) on how to pull branches from a repository is somewhat sparse (and documentation tends to assume knowledge of things not in my vocabulary). The embedded stuff is easy, the tools make my head hurt... Thanks -- Robin Gilks Senior Design Engineer Phone: (+64)(3) 357 1569 Tait Electronics Fax : (+64)(3) 359 4632 PO Box 1645 Christchurch Email : robin.gilks at tait.co.nz New Zealand ======================================================================= This email, including any attachments, is only for the intended addressee. It is subject to copyright, is confidential and may be the subject of legal or other privilege, none of which is waived or lost by reason of this transmission. If the receiver is not the intended addressee, please accept our apologies, notify us by return, delete all copies and perform no other act on the email. Unfortunately, we cannot warrant that the email has not been altered or corrupted during transmission. =======================================================================