From: Frederic Dalleau <frederic.dalleau@access-company.com>
To: BlueZ development <bluez-devel@lists.sourceforge.net>
Subject: Re: [Bluez-devel] RE : Plugz, a2dpd, and a2dpd2 strangeness
Date: Fri, 27 Apr 2007 17:57:13 +0200 [thread overview]
Message-ID: <46321D59.5050503@access-company.com> (raw)
In-Reply-To: <46320AC6.9080200@jlab.org>
The only thing I see is you use rate=32000, use rate=44100.
The whole a2dpd connection seems established.
I suggest you try another headset.
Chris Carlin wrote:
> carlin1 ~ # a2dpd -g
> A2DPD[10:29:49.541]: init_ipc: Selected IPC: unix, addr=127.0.0.1,
> bcst=127.0.0.255, port=21453
> A2DPD[10:29:49.541]: make_daemon_process: a2dpd [Apr 26 2007 17:07:32]
> starting ...
> A2DPD[10:29:49.541]: main: (errno=9:Bad file descriptor)a2dpd
> addr=00:0D:E8:01:BB:A3 timer=999 us [Apr 26 2007 17:07:37]
> A2DPD[10:29:49.541]: a2dpd_signal_init: Getting on DBUS
> A2DPD[10:29:49.542]: a2dpd_signal_init: Installing watch
> A2DPD[10:29:49.542]: add_dbus_watch: Added watch 0 0x809b8b8 disabled
> A2DPD[10:29:49.542]: add_dbus_watch: Added watch 1 0x809b8e0 enabled
> A2DPD[10:29:49.542]: a2dpd_signal_init: Registering object path:
> /com/access/a2dpd
> A2DPD[10:29:49.542]: a2dpd_signal_init: Acquiring service: com.access.a2dpd
> A2DPD[10:29:49.542]: a2dpd_signal_init: OK
> A2DPD[10:29:49.542]: a2dpd_signal_init: OK
> A2DPD[10:29:49.542]: a2dpd_register_sdp: OK
> A2DPD[10:29:49.542]: add_avrtg:
> A2DPD[10:29:49.542]: add_a2source:
> A2DPD[10:29:49.542]: main_loop:
> A2DPD[10:29:49.542]: make_server_socket:
> A2DPD[10:29:49.542]: bta2dpdevicenew:
> A2DPD[10:29:49.542]: a2dpd_signal_address_changed: 00:0D:E8:01:BB:A3
> A2DPD[10:29:49.543]: a2dpd_signal_set_socket: Signal socket set to 7
> A2DPD[10:29:49.543]: a2dpd_signal_state: Disconnected
> A2DPD[10:29:49.543]: a2dp_alloc:
> A2DPD[10:29:49.543]: a2dp_alloc: (a2dp = 0x80a9290)
> A2DPD[10:29:49.543]: a2dp_new: 00:0D:E8:01:BB:A3, 32000
> A2DPD[10:29:49.543]: a2dp_new: State AVDTP_STATE_DISCONNECTED
> A2DPD[10:29:49.543]: alsa_new:
> A2DPD[10:29:49.543]: alsa_new: device=plughw:0,0, framerate=32000
> A2DPD[10:29:49.543]: alsa_new: State ALSA_STATE_DISCONNECTED
> A2DPD[10:29:49.543]: alsa_new: returning 0x80ab418
> A2DPD[10:29:49.543]: sco_new:
> A2DPD[10:29:49.543]: sco_new: State SCO_STATE_DISCONNECTED
> A2DPD[10:29:49.543]: sco_state_disconnect: Filtering state : already
> disconnected
> A2DPD[10:29:49.543]: main_loop: Bluetooth Device Settings [32000 hz, 2
> channels, 16 bits]
> A2DPD[10:29:49.544]: avrcp_new: Listening for AVRCP on socket 9
> A2DPD[10:29:49.544]: avrcp_new: 0x80ab528
>
> ***hit play***
>
> A2DPD[10:29:53.502]: pollfd_cb_sockfd: Client 10 got index 0
> A2DPD[10:29:53.502]: stream_client_state_streamingsetup: PLAYBACK thread
> client_index=0, socket=10, id=0 started (44100 Hz, 2 channels, 16 bits)
> A2DPD[10:29:53.503]: a2dp_state_connect: State AVDTP_STATEX_SDP_CONNECTING
> A2DPD[10:29:53.503]: a2dp_state_machine: Role is INITIATOR
> A2DPD[10:29:53.503]: a2dp_state_machine: (errno=115:Operation now in
> progress)SDP connection on socket 11
> A2DPD[10:29:53.503]: a2dp_state_machine: State
> AVDTP_STATEX_SDP_CONNECTING_WAIT
> A2DPD[10:29:53.503]: a2dpd_signal_state: Connecting 00:0D:E8:01:BB:A3
> A2DPD[10:29:56.722]: a2dp_state_machine: SDP connection terminated
> A2DPD[10:29:56.744]: get_avdtp_psm: Parsing results
> A2DPD[10:29:56.744]: get_avdtp_psm: Record
> A2DPD[10:29:56.744]: get_avdtp_psm: Service Search OK
> A2DPD[10:29:56.761]: get_avdtp_psm: Checking non spec audio
> A2DPD[10:29:56.761]: a2dp_state_machine: Found psm 25
> A2DPD[10:29:56.761]: a2dp_state_machine: State AVDTP_STATEX_CTL_CONNECTING
> A2DPD[10:29:56.761]: a2dp_state_machine: Socket is 11
> A2DPD[10:29:56.761]: a2dp_state_machine: (errno=115:Operation now in
> progress)State AVDTP_STATEX_CTL_CONNECTING_WAIT
> A2DPD[10:29:56.784]: a2dp_state_machine: State AVDTP_STATE_IDLE
> A2DPD[10:29:56.785]: a2dp_state_machine: State AVDTP_STATEX_DISCOVERING
> A2DPD[10:29:56.786]: a2dp_state_machine: State AVDTP_STATEX_DISCOVERING_RESP
> A2DPD[10:29:56.800]: a2dp_handle_avdtp_message: Read non command packet
> (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_DISCOVER)
> A2DPD[10:29:56.800]: a2dp_state_machine: AVDTP_DISCOVER success
> A2DPD[10:29:56.800]: a2dp_state_machine: State
> AVDTP_STATEX_GETTING_CAPABILITIES
> A2DPD[10:29:56.801]: a2dp_state_machine: Getting capabilities for SEID=1
> A2DPD[10:29:56.801]: a2dp_state_machine: State
> AVDTP_STATEX_GETTING_CAPABILITIES_RESP
> A2DPD[10:29:56.812]: get_socket_omtu: Socket 9 imtu=672, omtu=0,
> flush_to=65535
> A2DPD[10:29:56.812]: pollfd_cb_avrcpfd: socket 12: Connection from
> A3:BB:01:E8:0D:00, mtu=610 accepted at index 0
> A2DPD[10:29:56.814]: a2dp_handle_avdtp_message: Read non command packet
> (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_GET_CAPABILITIES)
> A2DPD[10:29:56.814]: a2dp_state_machine: AVDTP_GET_CAPABILITIES success
> for seid 1
> A2DPD[10:29:56.814]: a2dp_state_machine: servcap_cap=1, servcap_len=0,
> A2DPD[10:29:56.814]: a2dp_state_machine: cap_type=7, length=6
> A2DPD[10:29:56.814]: a2dp_state_machine: media_type=0, codec=0
> A2DPD[10:29:56.814]: a2dp_state_machine: A2DPD Prefered bitpool 32
> A2DPD[10:29:56.814]: a2dp_state_machine: Device Prefered bitpool 2 -> 250
> A2DPD[10:29:56.814]: a2dp_state_machine: A2DPD Selected bitpool 32
> A2DPD[10:29:56.814]: a2dp_state_machine: State
> AVDTP_STATEX_SETTING_CONFIGURATION
> A2DPD[10:29:56.815]: a2dp_state_machine: State
> AVDTP_STATEX_SETTING_CONFIGURATION_RESP
> A2DPD[10:29:56.834]: a2dp_handle_avdtp_message: Read non command packet
> (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_SET_CONFIGURATION)
> A2DPD[10:29:56.834]: a2dp_state_machine: AVDTP_SET_CONFIGURATION success
> A2DPD[10:29:56.834]: a2dp_state_machine: State AVDTP_STATEX_STREAM_OPENING
> A2DPD[10:29:56.835]: a2dp_state_machine: State
> AVDTP_STATEX_STREAM_OPENING_RESP
> A2DPD[10:29:56.851]: a2dp_handle_avdtp_message: Read non command packet
> (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_OPEN)
> A2DPD[10:29:56.851]: a2dp_state_machine: AVDTP_OPEN success
> A2DPD[10:29:56.851]: a2dp_state_machine: State AVDTP_STATE_CONFIGURED
> A2DPD[10:29:56.852]: a2dp_state_machine: State
> AVDTP_STATEX_STREAM_CONNECTING
> A2DPD[10:29:56.853]: a2dp_state_machine: Socket is 13
> A2DPD[10:29:56.853]: a2dp_state_machine: (errno=115:Operation now in
> progress)State AVDTP_STATEX_STREAM_CONNECTING_WAIT
> A2DPD[10:29:56.884]: a2dp_state_machine: Stream connected
> A2DPD[10:29:56.884]: get_socket_omtu: Socket 13 imtu=672, omtu=678,
> flush_to=65535
> A2DPD[10:29:56.884]: a2dp_state_machine: State
> AVDTP_STATE_OPEN_START_STREAMING
> A2DPD[10:29:56.885]: a2dp_state_machine: State AVDTP_STATEX_STREAM_STARTING
> A2DPD[10:29:56.885]: a2dpd_signal_state: Connected 00:0D:E8:01:BB:A3
> A2DPD[10:29:56.886]: a2dp_state_machine: State
> AVDTP_STATEX_STREAM_STARTING_WAIT
> A2DPD[10:29:56.900]: a2dp_handle_avdtp_message: Read non command packet
> (msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_START)
> A2DPD[10:29:56.900]: a2dp_state_machine: AVDTP_START success
> A2DPD[10:29:56.900]: a2dp_state_machine: State AVDTP_STATE_STREAMING
>
> ***ogg123 says it's playing; no sound except for occasional chirps; no
> new messages from a2dpd***
>
> ***hit stop***
>
>
> A2DPD[10:30:22.184]: pollfd_cb_clients: Client 0: Error detected (err=0,
> toc=0, err=0, hup=1)
>
>
>> What headset/adapter is it? Did you start hcidump before a2dpd?
>>
>
> Headset is Creative CB2530. I've had identical results from four
> different adapters including both Broadcom and CSR chipsets, currently
> using a DLink DBT-120.
>
> Started hcidump before.
>
> ~Chris
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next prev parent reply other threads:[~2007-04-27 15:57 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-27 1:28 [Bluez-devel] Plugz, a2dpd, and a2dpd2 strangeness Chris Carlin
2007-04-27 4:03 ` Brad Midgley
2007-04-27 6:18 ` [Bluez-devel] RE : " Frederic Dalleau
2007-04-27 14:37 ` Chris Carlin
2007-04-27 15:57 ` Frederic Dalleau [this message]
2007-04-27 18:49 ` Chris Carlin
2007-04-27 14:26 ` [Bluez-devel] " Chris Carlin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46321D59.5050503@access-company.com \
--to=frederic.dalleau@access-company.com \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.