Re: How do external irq's get mapped?

[Sergei Shtylyov <sshtylyov@ru.mvista.com>]

Charles Krinke wrote:

>>Let me try a more simplified IRQ question a different way by only
>>referring to the 8541.
 
>>There are 12 external interrupt sources, irq[0..11] and as I understand

>>it, they all go through one vector, ExternalInput set in
>>head_fsl_booke.S and this vector resolves to "do_IRQ()", which I believe
>>is in arch/powerpc/kernel/irq.c (not arch/ppc/kernel/...).
 
>>I am striving to understand how mapping of these external pins
>>irq[0..11] gets to IRQ numbers as shown with "cat /proc/interrupts".
 
>     IIUC, the external IRQ #'s should follow those occupied by 32
> internal IRQs.
>     But those shown in that file are "virtual" numbers, i.e. they got
> re-mapped by the kernel as it sees fit (basically, it tries to assign
> the same # to IRQs above 15 and remaps those below)
 
>>Could someone point me at some references I can read to understand this
>>nuance of the 8541 in a linux-2.6.17.11 kernel, please.

>    I'm not sure arch/powerpc/ in 2.6.17 had the complete MPC8541
> support...

> So would this mean that the external IRQ0 pin would map to irq #32 and
> not irq #16 and the external IRQ11 pin would map to irq #43 and not irq

   Where from is that #16?

> #27? So that if I want IRQ0, I would set my irq member of the pci_dev
> struct to 32?

   Yeah, unless MPC8541 has some complications like CPM.  And also note that I'm assuming 32 internal IRQs based on what MPC8540 has, not having MPC8541 specs...

> Charles 

WBR, Sergei