All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anthony Liguori <anthony-rdkfGonbjUSkNkDKm+mE6A@public.gmane.org>
To: kvm-devel <kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
Subject: Re: [PATCH][SVM] Only save/restore MSRs when needed
Date: Sat, 28 Apr 2007 00:14:41 -0500	[thread overview]
Message-ID: <4632D841.6060202@codemonkey.ws> (raw)
In-Reply-To: <4632878B.6090606-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>

Anthony Liguori wrote:
> I've tested this with 32-bit and 64-bit guests on a 64-bit host and 
> with 32-bit guests on a 32-bit host.
>
> I *think* it's doing the right thing wrt to DEBUGCTL but an extra set 
> of eyes would be helpful.

I think the follow patch preserves the current behavior but I'm starting 
to believe that the current behavior is wrong.

The current code assumes that the guest DEBUGCTL gets loaded/saved 
during vmrun/vmexit.  By my reading of the spec (I finally printed out 
the new one :-)), DEBUGCTL only gets saved if LBR virtualization is 
enabled.  LBR virtualization also triggers the save/restore of the other 
4 debug registers.  The spec seems to suggest that the host version is 
saved before the guest is loaded too.

I think the right behavior is to do nothing if LBR is available and 
enabled; hw will do it all for us.  If LBR isn't available, I think we 
should be saving/restoring not just DEBUGCTL but the other 4.  We can 
further optimize that path though by doing the same sort of tricks I 
have below.

If that all seems sane, I'll submit another patch to fix that up.

Regards,

Anthony Liguori

> Depending on my machine's mood, we're at somewhere between 3200 and 
> 2700 cycles per VMEXIT.
>
> Regards,
>
> Anthony Liguori
> ------------------------------------------------------------------------
>
> From: Anthony Liguori <aliguori-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
> Subject: [PATCH][SVM] Only save/restore MSRs when needed
>
>   We only have to save/restore MSR_GS_BASE on every VMEXIT.  The rest can be
>   saved/restored when we leave the VCPU.  As a special case, MSR_IA32_DEBUGCTL
>   only needs to be saved/restored on every exit if debugging is enabled in
>   either the host or the guest.
>
> Signed-off-by: Anthony Liguori <aliguori-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
>
> Index: kernel/drivers/kvm/svm.c
> ===================================================================
> --- kernel.orig/drivers/kvm/svm.c	2007-04-27 17:52:37.200780944 -0500
> +++ kernel/drivers/kvm/svm.c	2007-04-27 18:14:02.098446808 -0500
> @@ -611,7 +611,7 @@
>  
>  static void svm_vcpu_load(struct kvm_vcpu *vcpu)
>  {
> -	int cpu;
> +	int cpu, i;
>  
>  	cpu = get_cpu();
>  	if (unlikely(cpu != vcpu->cpu)) {
> @@ -626,10 +626,24 @@
>  		vcpu->svm->vmcb->control.tsc_offset += delta;
>  		vcpu->cpu = cpu;
>  	}
> +
> +	for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++)
> +		rdmsrl(host_save_user_msrs[i], vcpu->svm->host_user_msrs[i]);
> +
> +	rdmsrl(MSR_IA32_DEBUGCTLMSR, vcpu->svm->host_ia32_debugctl);
>  }
>  
>  static void svm_vcpu_put(struct kvm_vcpu *vcpu)
>  {
> +	int i;
> +
> +	for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++)
> +		wrmsrl(host_save_user_msrs[i], vcpu->svm->host_user_msrs[i]);
> +
> +	wrmsrl(MSR_IA32_DEBUGCTLMSR, vcpu->svm->host_ia32_debugctl);
> +	/* FIXME: LASTBRANCHFROMIP, LASTBRANCHTOIP, LASTINTFROMIP,
> +	   LASTINTTOIP */
> +
>  	rdtscll(vcpu->host_tsc);
>  	put_cpu();
>  }
> @@ -815,18 +829,16 @@
>  
>  static void load_host_msrs(struct kvm_vcpu *vcpu)
>  {
> -	int i;
> -
> -	for ( i = 0; i < NR_HOST_SAVE_MSRS; i++)
> -		wrmsrl(host_save_msrs[i], vcpu->svm->host_msrs[i]);
> +#ifdef CONFIG_X86_64
> +	wrmsrl(MSR_GS_BASE, vcpu->svm->host_gs_base);
> +#endif
>  }
>  
>  static void save_host_msrs(struct kvm_vcpu *vcpu)
>  {
> -	int i;
> -
> -	for ( i = 0; i < NR_HOST_SAVE_MSRS; i++)
> -		rdmsrl(host_save_msrs[i], vcpu->svm->host_msrs[i]);
> +#ifdef CONFIG_X86_64
> +	rdmsrl(MSR_GS_BASE, vcpu->svm->host_gs_base);
> +#endif
>  }
>  
>  static void new_asid(struct kvm_vcpu *vcpu, struct svm_cpu_data *svm_data)
> @@ -1498,6 +1510,11 @@
>  		load_db_regs(vcpu->svm->db_regs);
>  	}
>  
> +	if ((vcpu->svm->vmcb->save.dr7 & 0xff) ||
> +	    (vcpu->svm->host_dr7 & 0xff)) {
> +		wrmsrl(MSR_IA32_DEBUGCTLMSR, vcpu->svm->host_ia32_debugctl);
> +	}
> +
>  	if (vcpu->fpu_active) {
>  		fx_save(vcpu->host_fx_image);
>  		fx_restore(vcpu->guest_fx_image);
> @@ -1617,6 +1634,11 @@
>  		fx_restore(vcpu->host_fx_image);
>  	}
>  
> +	if ((vcpu->svm->vmcb->save.dr7 & 0xff) ||
> +	    (vcpu->svm->host_dr7 & 0xff)) {
> +		rdmsrl(MSR_IA32_DEBUGCTLMSR, vcpu->svm->host_ia32_debugctl);
> +	}
> +
>  	if ((vcpu->svm->vmcb->save.dr7 & 0xff))
>  		load_db_regs(vcpu->svm->host_db_regs);
>  
> Index: kernel/drivers/kvm/kvm_svm.h
> ===================================================================
> --- kernel.orig/drivers/kvm/kvm_svm.h	2007-04-27 17:52:37.240774864 -0500
> +++ kernel/drivers/kvm/kvm_svm.h	2007-04-27 17:53:42.509852456 -0500
> @@ -9,17 +9,15 @@
>  #include "svm.h"
>  #include "kvm.h"
>  
> -static const u32 host_save_msrs[] = {
> +static const u32 host_save_user_msrs[] = {
>  #ifdef CONFIG_X86_64
>  	MSR_STAR, MSR_LSTAR, MSR_CSTAR, MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
> -	MSR_FS_BASE, MSR_GS_BASE,
> +	MSR_FS_BASE,
>  #endif
>  	MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
> -	MSR_IA32_DEBUGCTLMSR, /*MSR_IA32_LASTBRANCHFROMIP,
> -	MSR_IA32_LASTBRANCHTOIP, MSR_IA32_LASTINTFROMIP,MSR_IA32_LASTINTTOIP,*/
>  };
>  
> -#define NR_HOST_SAVE_MSRS ARRAY_SIZE(host_save_msrs)
> +#define NR_HOST_SAVE_USER_MSRS ARRAY_SIZE(host_save_user_msrs)
>  #define NUM_DB_REGS 4
>  
>  struct vcpu_svm {
> @@ -32,7 +30,9 @@
>  
>  	u64 next_rip;
>  
> -	u64 host_msrs[NR_HOST_SAVE_MSRS];
> +	u64 host_user_msrs[NR_HOST_SAVE_USER_MSRS];
> +	u64 host_ia32_debugctl;
> +	u64 host_gs_base;
>  	unsigned long host_cr2;
>  	unsigned long host_db_regs[NUM_DB_REGS];
>  	unsigned long host_dr6;
>   
> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> ------------------------------------------------------------------------
>
> _______________________________________________
> kvm-devel mailing list
> kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/kvm-devel
>   


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

  parent reply	other threads:[~2007-04-28  5:14 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-04-27 23:30 [PATCH][SVM] Only save/restore MSRs when needed Anthony Liguori
     [not found] ` <4632878B.6090606-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2007-04-28  5:14   ` Anthony Liguori [this message]
     [not found]     ` <4632D841.6060202-rdkfGonbjUSkNkDKm+mE6A@public.gmane.org>
2007-04-28  6:19       ` Avi Kivity
     [not found]         ` <4632E780.8060907-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-04-29  0:37           ` Anthony Liguori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4632D841.6060202@codemonkey.ws \
    --to=anthony-rdkfgonbjusknkdkm+me6a@public.gmane.org \
    --cc=kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.