From: "Rafał Bilski" <rafalbilski@interia.pl>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Natsemi DP83815 driver spaming
Date: Tue, 01 May 2007 09:17:04 +0200 [thread overview]
Message-ID: <4636E970.3010602@interia.pl> (raw)
In-Reply-To: <20070430205522.abad2481.akpm@linux-foundation.org>
Hello,
>> [...]
>
> It seems to be repeatedly setting the same duplex setting. The closest
> thing I can see in there in recent times is
> 68c90166e4aaa15ddcdd4778ad30bfb8b32534be, "Add support for using MII port
> with no PHY".
I have this terminal only one week, so it doesn't have to be recent regresion.
> Does applying the below backout patch fix things?
Unfortunatly no. But messages are a bit different sometimes.
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 120k freed
eth0: DSPCFG accepted after 0 usec.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 40 usec.
[...]
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x200000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 40 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x200000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: increased tx threshold, txcfg 0xd0f01004.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 80 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: increased tx threshold, txcfg 0xd0f01004.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: increased tx threshold, txcfg 0xd0f01004.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 80 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: increased tx threshold, txcfg 0xd0f01004.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: increased tx threshold, txcfg 0xd0f01004.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: increased tx threshold, txcfg 0xd0f01004.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: increased tx threshold, txcfg 0xd0f01004.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Setting full-duplex based on negotiated link capability.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
eth0: increased tx threshold, txcfg 0xd0f01004.
eth0: DSPCFG accepted after 0 usec.
eth0: Wake-up event 0x80000a
eth0: Setting full-duplex based on negotiated link capability.
[...]
Please CC me.
Thank You
Rafał
----------------------------------------------------------------------
NIE KUPUJ!!!
...zanim nie porownasz cen >> http://link.interia.pl/f1a5e
next prev parent reply other threads:[~2007-05-01 7:17 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-30 20:58 Natsemi DP83815 driver spaming Rafał Bilski
2007-05-01 3:55 ` Andrew Morton
2007-05-01 7:17 ` Rafał Bilski [this message]
2007-05-01 8:23 ` Rafał Bilski
2007-05-01 8:35 ` Andrew Morton
2007-05-01 10:40 ` Rafał Bilski
2007-05-01 8:46 ` Mark Brown
2007-05-01 10:25 ` Rafał Bilski
2007-05-01 18:08 ` Mark Brown
2007-05-01 19:10 ` Rafał Bilski
2007-05-01 19:52 ` Rafał Bilski
2007-05-01 21:27 ` Mark Brown
[not found] ` <b3ece790705011543gdca3a9ei905d3499b6c18dc8@mail.gmail.com>
2007-05-02 5:54 ` Rafał Bilski
[not found] ` <b3ece790705012303x1e5a2d03xddf6c14aec5a99d8@mail.gmail.com>
2007-05-02 6:34 ` Rafał Bilski
2007-05-02 6:51 ` Tim Hockin
2007-05-02 8:22 ` Mark Brown
[not found] ` <b3ece790705020744p2e73bb5fo2c0acad947a5de15@mail.gmail.com>
2007-05-02 20:05 ` Rafał Bilski
2007-05-02 20:48 ` Tim Hockin
2007-05-02 21:41 ` Mark Brown
2007-05-03 6:33 ` Rafał Bilski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4636E970.3010602@interia.pl \
--to=rafalbilski@interia.pl \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.