From: Robert Hancock <hancockr@shaw.ca>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Olivier Galibert <galibert@pobox.com>,
linux-kernel <linux-kernel@vger.kernel.org>,
Andi Kleen <ak@suse.de>, Chuck Ebbert <cebbert@redhat.com>,
Len Brown <lenb@kernel.org>
Subject: Re: [RFC PATCH] PCI MMCONFIG: add validation against ACPI motherboard resources
Date: Wed, 02 May 2007 08:34:36 -0600 [thread overview]
Message-ID: <4638A17C.40209@shaw.ca> (raw)
In-Reply-To: <200705012227.31729.jbarnes@virtuousgeek.org>
Jesse Barnes wrote:
> On Tuesday, May 01, 2007, Jesse Barnes wrote:
>>> I'm testing it now on my 965...
>> Bah... nevermind Robert, I see you're doing this already in
>> pci_mmcfg_reject_broken. I'm about to reboot & test now.
>
> Ok, I've tested a bit on my 965 (after re-adding my old patch to support
> it) and the new checks are more complete, but my BIOS still appears to be
> buggy.
>
> The extended config space (as defined by the register) is at 0xf0000000
> (full value is 0xf0000003 indicating 128M enabled). The ACPI MCFG table
> has this space reserved according to Robert's new code, but the machine
> hangs due to the address space aliasing Olivier mentioned awhile back. I
> don't have a PCIe card to test with (or any devices that require extended
> config space that I know of) so I can't really tell if Windows supports
> PCIe on this platform, but if it does I don't see how it would w/o having
> a full bridge driver and sophisticated address space allocation builtin.
Windows XP doesn't use MMCONFIG or any extended configuration space. I
believe Vista is supposed to, though. Not sure how they are handling
this issue.
>
> I'm going to try updating my BIOS, but if that doesn't solve this problem,
> I'm not sure what we can do about it. Should pci_mmcfg_insert_resources
> check for conflicts? Should we just blacklist certain boards? I can try
> pinging our BIOS folks about this board to see what was intended, but I'm
> sure this won't be the only board we have problems with, so we'll need to
> address it generically somehow.
Can you post what your board has for PNPACPI reserved resources (I
believe they're in /sys/devices/pnp0/*/resources IIRC, don't have a
Linux box handy right now). Full dmesg would also be useful, I think it
dumps out those reservations at boot nowadays..
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/
next prev parent reply other threads:[~2007-05-02 14:35 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-30 2:14 [RFC PATCH] PCI MMCONFIG: add validation against ACPI motherboard resources Robert Hancock
2007-04-30 2:59 ` Randy Dunlap
2007-04-30 22:59 ` Olivier Galibert
2007-04-30 23:26 ` Robert Hancock
2007-05-01 16:48 ` Jesse Barnes
2007-05-02 2:41 ` Jesse Barnes
2007-05-02 2:56 ` Jesse Barnes
2007-05-02 5:27 ` Jesse Barnes
2007-05-02 14:34 ` Robert Hancock [this message]
2007-05-02 17:57 ` Jesse Barnes
2007-05-02 23:45 ` Robert Hancock
2007-05-02 23:54 ` Jesse Barnes
2007-05-04 21:06 ` Jesse Barnes
2007-05-05 0:22 ` Robert Hancock
2007-05-21 19:10 ` Jesse Barnes
2007-05-21 19:26 ` Robert Hancock
2007-05-21 20:07 ` Jesse Barnes
2007-05-21 20:22 ` Jesse Barnes
2007-05-23 0:31 ` Robert Hancock
2007-05-23 0:38 ` Jesse Barnes
2007-05-23 0:53 ` Robert Hancock
2007-05-23 0:56 ` Jesse Barnes
2007-05-23 1:06 ` Robert Hancock
2007-05-23 18:52 ` Jesse Barnes
2007-05-23 20:20 ` Linus Torvalds
2007-05-23 20:38 ` Alan Cox
2007-05-23 20:45 ` Linus Torvalds
2007-05-23 20:49 ` Jesse Barnes
2007-05-23 20:56 ` Linus Torvalds
2007-05-23 21:03 ` Jesse Barnes
2007-05-23 21:09 ` Jeff Garzik
2007-05-23 21:35 ` Alan Cox
2007-05-23 21:35 ` Jeff Garzik
2007-05-23 21:37 ` Jesse Barnes
2007-05-23 21:42 ` Jeff Garzik
2007-05-23 23:07 ` Stephen Hemminger
2007-05-23 21:54 ` Linus Torvalds
2007-05-23 22:06 ` Jesse Barnes
2007-05-23 22:16 ` Linus Torvalds
2007-05-23 22:28 ` Jesse Barnes
2007-05-23 23:04 ` David Miller
2007-05-23 23:11 ` Jesse Barnes
2007-05-23 23:15 ` Robert Hancock
2007-05-23 23:21 ` Jesse Barnes
2007-05-23 21:20 ` Jesse Barnes
2007-05-23 22:24 ` Olivier Galibert
2007-05-23 22:31 ` Jesse Barnes
2007-05-23 22:48 ` Linus Torvalds
2007-05-23 22:55 ` Jesse Barnes
2007-05-24 0:21 ` Linus Torvalds
2007-05-24 2:59 ` Jesse Barnes
2007-05-24 3:18 ` Linus Torvalds
2007-05-24 3:20 ` Linus Torvalds
2007-05-24 3:40 ` Jesse Barnes
2007-05-24 5:19 ` Robert Hancock
2007-05-24 6:18 ` Jeff Garzik
2007-05-24 15:42 ` Linus Torvalds
2007-05-23 23:04 ` Robert Hancock
2007-05-23 23:04 ` Robert Hancock
2007-05-23 23:06 ` Jesse Barnes
2007-05-24 0:02 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4638A17C.40209@shaw.ca \
--to=hancockr@shaw.ca \
--cc=ak@suse.de \
--cc=cebbert@redhat.com \
--cc=galibert@pobox.com \
--cc=jbarnes@virtuousgeek.org \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.