From: Tomasz Chmielewski <mangoo@wpkg.org>
To: Linux IDE <linux-ide@vger.kernel.org>
Subject: sata_mv hotplug status?
Date: Fri, 11 May 2007 13:29:44 +0200 [thread overview]
Message-ID: <464453A8.9080307@wpkg.org> (raw)
I'm a little confused about sata_mv hotplug status.
According to http://linux-ata.org/driver-status.html#marvell, the driver
has "full SATA control including hotplug".
A bit down on that same page, the matrix
http://linux-ata.org/driver-status.html#matrix says sata_mv - device
hotplug: no.
Which one is true? I guess the first says about drive hotplug, and the
second says about (PCI) device hotplug?
Today, I tried to add a drive to that Marvell SATA controller:
01:00.0 SCSI storage controller: Marvell Technology Group Ltd.
MV88SX6081 8-port SATA II PCI-X Controller (rev 09)
But it wasn't detected at all (no dmesg/kernel sign that the drive was
connected) - I had to reboot the machine to get that drive detected.
This would indicate that sata_mv doesn't support any sort of drive
*plug? Or do I have to take some extra steps to get the drives detected?
I'm running 2.6.21 kernel.
--
Tomasz Chmielewski
http://wpkg.org
next reply other threads:[~2007-05-11 11:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-11 11:29 Tomasz Chmielewski [this message]
2007-05-11 19:16 ` sata_mv hotplug status? Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=464453A8.9080307@wpkg.org \
--to=mangoo@wpkg.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.