From: Simon Arlott <simon@fire.lp0.eu>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
uclinux-dist-devel@blackfin.uclinux.org, trivial@kernel.org
Subject: [PATCH] spelling fixes: arch/blackfin/
Date: Fri, 11 May 2007 20:41:00 +0100 [thread overview]
Message-ID: <4644C6CC.9060009@simon.arlott.org.uk> (raw)
Spelling fixes in arch/blackfin/.
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
---
arch/blackfin/kernel/irqchip.c | 2 +-
arch/blackfin/kernel/traps.c | 2 +-
arch/blackfin/mach-bf533/boards/cm_bf533.c | 2 +-
arch/blackfin/mach-bf533/boards/ezkit.c | 2 +-
arch/blackfin/mach-bf533/ints-priority.c | 2 +-
arch/blackfin/mach-bf537/boards/generic_board.c | 2 +-
arch/blackfin/mach-bf537/boards/pnav10.c | 2 +-
arch/blackfin/mach-bf537/boards/stamp.c | 2 +-
arch/blackfin/mach-bf537/ints-priority.c | 2 +-
arch/blackfin/mach-bf561/boards/cm_bf561.c | 4 ++--
arch/blackfin/mach-bf561/ints-priority.c | 2 +-
arch/blackfin/mach-common/ints-priority-dc.c | 2 +-
arch/blackfin/mach-common/ints-priority-sc.c | 2 +-
arch/blackfin/mm/blackfin_sram.c | 6 +++---
14 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index df5bf02..80996a1 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -91,7 +91,7 @@ int show_interrupts(struct seq_file *p, void *v)
}
/*
- * do_IRQ handles all hardware IRQ's. Decoded IRQs should not
+ * do_IRQ handles all hardware IRQs. Decoded IRQs should not
* come via this function. Instead, they should provide their
* own 'handler'
*/
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 9556b73..5033315 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -549,7 +549,7 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
break;
#ifndef CONFIG_DEBUG_HWERR
/* If one of the last few instructions was a STI
- * it is likily that the error occured awhile ago
+ * it is likely that the error occurred awhile ago
* and we just noticed
*/
if (x >= 0x0040 && x <= 0x0047 && i <= 0)
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 23a7f60..edd31ce 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -1,7 +1,7 @@
/*
* File: arch/blackfin/mach-bf533/boards/cm_bf533.c
* Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au> Copright 2005
+ * Author: Aidan Williams <aidan@nicta.com.au> Copyright 2005
*
* Created: 2005
* Description: Board description file
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 747298e..0b522d9 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -1,6 +1,6 @@
/*
* File: arch/blackfin/mach-bf533/ezkit.c
- * Based on: Orginal Work
+ * Based on: Original Work
* Author: Aidan Williams <aidan@nicta.com.au>
*
* Created: 2005
diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c
index 36a6933..a3e1789 100644
--- a/arch/blackfin/mach-bf533/ints-priority.c
+++ b/arch/blackfin/mach-bf533/ints-priority.c
@@ -4,7 +4,7 @@
* Author: Michael Hennerich
*
* Created: ?
- * Description: Set up the interupt priorities
+ * Description: Set up the interrupt priorities
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 9019c0e..fd57e74 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -55,7 +55,7 @@ static struct resource bfin_pcmcia_cf_resources[] = {
.end = 0x20312000,
.flags = IORESOURCE_MEM,
},{
- .start = 0x20311000, /* Attribute Memeory */
+ .start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
},{
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 40d3a1b..8aaf76d 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -59,7 +59,7 @@ static struct resource bfin_pcmcia_cf_resources[] = {
.end = 0x20312000,
.flags = IORESOURCE_MEM,
},{
- .start = 0x20311000, /* Attribute Memeory */
+ .start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
},{
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index ba2f875..3a29b4d 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -108,7 +108,7 @@ static struct resource bfin_pcmcia_cf_resources[] = {
.end = 0x20312000,
.flags = IORESOURCE_MEM,
},{
- .start = 0x20311000, /* Attribute Memeory */
+ .start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
},{
diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c
index fd6308e..2dbf3df 100644
--- a/arch/blackfin/mach-bf537/ints-priority.c
+++ b/arch/blackfin/mach-bf537/ints-priority.c
@@ -4,7 +4,7 @@
* Author: Michael Hennerich
*
* Created:
- * Description: Set up the interupt priorities
+ * Description: Set up the interrupt priorities
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 6824e95..3dc5c04 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -1,7 +1,7 @@
/*
* File: arch/blackfin/mach-bf533/boards/cm_bf561.c
* Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au> Copright 2005
+ * Author: Aidan Williams <aidan@nicta.com.au> Copyright 2005
*
* Created: 2006
* Description: Board description file
@@ -43,7 +43,7 @@
char *bfin_board_name = "Bluetechnix CM BF561";
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI perpherals info goes here */
+/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c
index 89c52ff..86e3b0e 100644
--- a/arch/blackfin/mach-bf561/ints-priority.c
+++ b/arch/blackfin/mach-bf561/ints-priority.c
@@ -4,7 +4,7 @@
* Author: Michael Hennerich
*
* Created:
- * Description: Set up the interupt priorities
+ * Description: Set up the interrupt priorities
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c
index f3cf070..80943bb 100644
--- a/arch/blackfin/mach-common/ints-priority-dc.c
+++ b/arch/blackfin/mach-common/ints-priority-dc.c
@@ -4,7 +4,7 @@
* Author:
*
* Created: ?
- * Description: Set up the interupt priorities
+ * Description: Set up the interrupt priorities
*
* Modified:
* 1996 Roman Zippel
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c
index 34b6228..2cfc7d5 100644
--- a/arch/blackfin/mach-common/ints-priority-sc.c
+++ b/arch/blackfin/mach-common/ints-priority-sc.c
@@ -4,7 +4,7 @@
* Author:
*
* Created: ?
- * Description: Set up the interupt priorities
+ * Description: Set up the interrupt priorities
*
* Modified:
* 1996 Roman Zippel
diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
index dd0c650..3c9e635 100644
--- a/arch/blackfin/mm/blackfin_sram.c
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -149,7 +149,7 @@ static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
size = (size + 3) & ~3;
/* not use the good method to match the best slot !!! */
- /* search an available memeory slot */
+ /* search an available memory slot */
for (i = 0; i < count; i++) {
if ((pfree[i].flag == SRAM_SLT_FREE)
&& (pfree[i].size >= size)) {
@@ -162,7 +162,7 @@ static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
if (i >= count)
return NULL;
- /* updated the NULL memeory slot !!! */
+ /* updated the NULL memory slot !!! */
if (pfree[i].size > size) {
for (i = 0; i < count; i++) {
if (pfree[i].flag == SRAM_SLT_NULL) {
@@ -186,7 +186,7 @@ static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count,
int i, index = -1;
void *addr = NULL;
- /* search an available memeory slot */
+ /* search an available memory slot */
for (i = 0; i < count; i++) {
if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) {
addr = pfree[i].paddr;
--
1.5.0.1
--
Simon Arlott
reply other threads:[~2007-05-11 19:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4644C6CC.9060009@simon.arlott.org.uk \
--to=simon@fire.lp0.eu \
--cc=linux-kernel@vger.kernel.org \
--cc=trivial@kernel.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.