From: Simon Arlott <simon@fire.lp0.eu>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
dev-etrax@axis.com, trivial@kernel.org
Subject: [PATCH] spelling fixes: arch/cris/
Date: Fri, 11 May 2007 20:41:10 +0100 [thread overview]
Message-ID: <4644C6D6.9010101@simon.arlott.org.uk> (raw)
Spelling fixes in arch/cris/.
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
---
arch/cris/arch-v10/boot/compressed/misc.c | 2 +-
arch/cris/arch-v10/kernel/debugport.c | 2 +-
arch/cris/arch-v10/kernel/fasttimer.c | 2 +-
arch/cris/arch-v10/kernel/irq.c | 2 +-
arch/cris/arch-v10/kernel/kgdb.c | 2 +-
arch/cris/arch-v10/kernel/process.c | 2 +-
arch/cris/arch-v10/kernel/shadows.c | 2 +-
arch/cris/arch-v10/lib/string.c | 2 +-
arch/cris/arch-v10/lib/usercopy.c | 6 +++---
arch/cris/arch-v32/boot/compressed/misc.c | 6 +++---
arch/cris/arch-v32/drivers/axisflashmap.c | 2 +-
arch/cris/arch-v32/drivers/i2c.c | 2 +-
arch/cris/arch-v32/drivers/nandflash.c | 2 +-
arch/cris/arch-v32/drivers/pcf8563.c | 2 +-
arch/cris/arch-v32/kernel/fasttimer.c | 2 +-
arch/cris/arch-v32/kernel/irq.c | 8 ++++----
arch/cris/arch-v32/kernel/process.c | 2 +-
arch/cris/arch-v32/kernel/signal.c | 4 ++--
arch/cris/arch-v32/kernel/smp.c | 2 +-
arch/cris/arch-v32/kernel/time.c | 2 +-
arch/cris/arch-v32/kernel/traps.c | 2 +-
arch/cris/arch-v32/lib/string.c | 2 +-
arch/cris/arch-v32/lib/usercopy.c | 6 +++---
arch/cris/arch-v32/mm/tlb.c | 6 +++---
arch/cris/kernel/irq.c | 8 ++++----
arch/cris/mm/fault.c | 4 ++--
arch/cris/mm/init.c | 2 +-
arch/cris/mm/tlb.c | 2 +-
28 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c
index ffb8d21..e205d2e 100644
--- a/arch/cris/arch-v10/boot/compressed/misc.c
+++ b/arch/cris/arch-v10/boot/compressed/misc.c
@@ -8,7 +8,7 @@
*
* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
* puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adoptation for Linux/CRIS Axis Communications AB, 1999
+ * adaptation for Linux/CRIS Axis Communications AB, 1999
*
*/
diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c
index 2b536ca..93679a4 100644
--- a/arch/cris/arch-v10/kernel/debugport.c
+++ b/arch/cris/arch-v10/kernel/debugport.c
@@ -83,7 +83,7 @@
*
* Revision 1.4 2002/11/19 14:35:24 starvik
* Changes from linux 2.4
- * Changed struct initializer syntax to the currently prefered notation
+ * Changed struct initializer syntax to the currently preferred notation
*
* Revision 1.3 2002/11/06 09:47:03 starvik
* Modified for new interrupt macros
diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c
index 8cbdf59..d3ea052 100644
--- a/arch/cris/arch-v10/kernel/fasttimer.c
+++ b/arch/cris/arch-v10/kernel/fasttimer.c
@@ -84,7 +84,7 @@
* with time based on jiffies and *R_TIMER0_DATA, uses a table
* for fast conversion of timer value to microseconds.
* (Much faster the standard do_gettimeofday() and we don't really
- * wan't to use the true time - we wan't the "uptime" so timers don't screw up
+ * want to use the true time - we want the "uptime" so timers don't screw up
* when we change the time.
* TODO: Add efficient support for continuous timers as well.
*
diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c
index 96094cb..845c95f 100644
--- a/arch/cris/arch-v10/kernel/irq.c
+++ b/arch/cris/arch-v10/kernel/irq.c
@@ -169,7 +169,7 @@ init_IRQ(void)
for (i = 0; i < 256; i++)
etrax_irv->v[i] = weird_irq;
- /* Initialize IRQ handler descriptiors. */
+ /* Initialize IRQ handler descriptors. */
for(i = 2; i < NR_IRQS; i++) {
irq_desc[i].chip = &crisv10_irq_type;
set_int_vector(i, interrupt[i]);
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
index 07628a1..21b17f2 100644
--- a/arch/cris/arch-v10/kernel/kgdb.c
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -959,7 +959,7 @@ stub_is_stopped(int sigval)
/* Send register contents. We probably only need to send the
* PC, frame pointer and stack pointer here. Other registers will be
- * explicitely asked for. But for now, send all.
+ * explicitly asked for. But for now, send all.
*/
for (regno = R0; regno <= USP; regno++) {
diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c
index b6831ce..1a3760c 100644
--- a/arch/cris/arch-v10/kernel/process.c
+++ b/arch/cris/arch-v10/kernel/process.c
@@ -64,7 +64,7 @@ void hard_reset_now (void)
#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
cause_of_death = 0xbedead;
#else
- /* Since we dont plan to keep on reseting the watchdog,
+ /* Since we dont plan to keep on resetting the watchdog,
the key can be arbitrary hence three */
*R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, 3) |
IO_STATE(R_WATCHDOG, enable, start);
diff --git a/arch/cris/arch-v10/kernel/shadows.c b/arch/cris/arch-v10/kernel/shadows.c
index 38fd44d..326178a 100644
--- a/arch/cris/arch-v10/kernel/shadows.c
+++ b/arch/cris/arch-v10/kernel/shadows.c
@@ -20,7 +20,7 @@ unsigned long r_timer_ctrl_shadow;
* These are only usable if there actually IS a latch connected
* to the corresponding external chip-select pin.
*
- * A common usage is that CSP0 controls LED's and CSP4 video chips.
+ * A common usage is that CSP0 controls LEDs and CSP4 video chips.
*/
unsigned long port_cse1_shadow;
diff --git a/arch/cris/arch-v10/lib/string.c b/arch/cris/arch-v10/lib/string.c
index 8ffde49..15d6662 100644
--- a/arch/cris/arch-v10/lib/string.c
+++ b/arch/cris/arch-v10/lib/string.c
@@ -41,7 +41,7 @@ void *memcpy(void *pdst,
Make sure the compiler is able to make something useful of this.
As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
- If gcc was allright, it really would need no temporaries, and no
+ If gcc was alright, it really would need no temporaries, and no
stack space to save stuff on. */
register void *return_dst __asm__ ("r10") = pdst;
diff --git a/arch/cris/arch-v10/lib/usercopy.c b/arch/cris/arch-v10/lib/usercopy.c
index 43778d5..a12c708 100644
--- a/arch/cris/arch-v10/lib/usercopy.c
+++ b/arch/cris/arch-v10/lib/usercopy.c
@@ -38,7 +38,7 @@ __copy_user (void __user *pdst, const void *psrc, unsigned long pn)
As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
FIXME: Comment for old gcc version. Check.
- If gcc was allright, it really would need no temporaries, and no
+ If gcc was alright, it really would need no temporaries, and no
stack space to save stuff on. */
register char *dst __asm__ ("r13") = pdst;
@@ -200,7 +200,7 @@ __copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
FIXME: Comment for old gcc version. Check.
- If gcc was allright, it really would need no temporaries, and no
+ If gcc was alright, it really would need no temporaries, and no
stack space to save stuff on. */
register char *dst __asm__ ("r13") = pdst;
@@ -380,7 +380,7 @@ __do_clear_user (void __user *pto, unsigned long pn)
As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
FIXME: Comment for old gcc version. Check.
- If gcc was allright, it really would need no temporaries, and no
+ If gcc was alright, it really would need no temporaries, and no
stack space to save stuff on. */
register char *dst __asm__ ("r13") = pto;
diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c
index 1190269..0169ba1 100644
--- a/arch/cris/arch-v32/boot/compressed/misc.c
+++ b/arch/cris/arch-v32/boot/compressed/misc.c
@@ -8,7 +8,7 @@
*
* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
* puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adoptation for Linux/CRIS Axis Communications AB, 1999
+ * adaptation for Linux/CRIS Axis Communications AB, 1999
*
*/
@@ -151,7 +151,7 @@ serout(const char *s, reg_scope_instances regi_ser)
do {
rs = REG_RD(ser, regi_ser, rs_stat_din);
}
- while (!rs.tr_rdy);/* Wait for tranceiver. */
+ while (!rs.tr_rdy);/* Wait for transceiver. */
REG_WR(ser, regi_ser, rw_dout, dout);
}
@@ -264,7 +264,7 @@ serial_setup(reg_scope_instances regi_ser)
tr_ctrl.stop_bits = 1; /* 2 stop bits. */
/*
- * The baudrate setup is a bit fishy, but in the end the tranceiver is
+ * The baudrate setup is a bit fishy, but in the end the transceiver is
* set to 4800 and the receiver to 115200. The magic value is
* 29.493 MHz.
*/
diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c
index 5180d45..3ec12ea 100644
--- a/arch/cris/arch-v32/drivers/axisflashmap.c
+++ b/arch/cris/arch-v32/drivers/axisflashmap.c
@@ -205,7 +205,7 @@ static struct mtd_info *probe_cs(struct map_info *map_cs)
/*
* Probe each chip select individually for flash chips. If there are chips on
* both cse0 and cse1, the mtd_info structs will be concatenated to one struct
- * so that MTD partitions can cross chip boundries.
+ * so that MTD partitions can cross chip boundaries.
*
* The only known restriction to how you can mount your chips is that each
* chip select must hold similar flash chips. But you need external hardware
diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c
index 5d6c527..6ab7434 100644
--- a/arch/cris/arch-v32/drivers/i2c.c
+++ b/arch/cris/arch-v32/drivers/i2c.c
@@ -275,7 +275,7 @@ i2c_getack(void)
ack = 0;
i2c_delay(CLOCK_HIGH_TIME/2);
if(!ack){
- if(!i2c_getbit()) /* receiver pulld SDA low */
+ if(!i2c_getbit()) /* receiver pulled SDA low */
ack = 1;
i2c_delay(CLOCK_HIGH_TIME/2);
}
diff --git a/arch/cris/arch-v32/drivers/nandflash.c b/arch/cris/arch-v32/drivers/nandflash.c
index 93ddea4..5ce015c 100644
--- a/arch/cris/arch-v32/drivers/nandflash.c
+++ b/arch/cris/arch-v32/drivers/nandflash.c
@@ -138,7 +138,7 @@ struct mtd_info* __init crisv32_nand_flash_probe (void)
/* Enable the following for a flash based bad block table */
this->options = NAND_USE_FLASH_BBT;
- /* Scan to find existance of the device */
+ /* Scan to find existence of the device */
if (nand_scan (crisv32_mtd, 1)) {
err = -ENXIO;
goto out_ior;
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
index 24b919b..e6f1eff 100644
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -4,7 +4,7 @@
* From Phillips' datasheet:
*
* The PCF8563 is a CMOS real-time clock/calendar optimized for low power
- * consumption. A programmable clock output, interupt output and voltage
+ * consumption. A programmable clock output, interrupt output and voltage
* low detector are also provided. All address and data are transferred
* serially via two-line bidirectional I2C-bus. Maximum bus speed is
* 400 kbits/s. The built-in word address register is incremented
diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c
index 79e1e4c..b40551f 100644
--- a/arch/cris/arch-v32/kernel/fasttimer.c
+++ b/arch/cris/arch-v32/kernel/fasttimer.c
@@ -97,7 +97,7 @@
* with time based on jiffies and *R_TIMER0_DATA, uses a table
* for fast conversion of timer value to microseconds.
* (Much faster the standard do_gettimeofday() and we don't really
- * wan't to use the true time - we wan't the "uptime" so timers don't screw up
+ * want to use the true time - we want the "uptime" so timers don't screw up
* when we change the time.
* TODO: Add efficient support for continuous timers as well.
*
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index cc361bf..a9acaa2 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -140,7 +140,7 @@ block_irq(int irq, int cpu)
spin_lock_irqsave(&irq_lock, flags);
intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
- /* Remember; 1 let thru, 0 block. */
+ /* Remember; 1 let through, 0 block. */
intr_mask &= ~(1 << (irq - FIRST_IRQ));
REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask);
@@ -156,7 +156,7 @@ unblock_irq(int irq, int cpu)
spin_lock_irqsave(&irq_lock, flags);
intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
- /* Remember; 1 let thru, 0 block. */
+ /* Remember; 1 let through, 0 block. */
intr_mask |= (1 << (irq - FIRST_IRQ));
REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask);
@@ -308,7 +308,7 @@ crisv32_do_multiple(struct pt_regs* regs)
*/
irq_enter();
- /* Get which IRQs that happend. */
+ /* Get which IRQs that happened. */
masked = REG_RD_INT(intr_vect, irq_regs[cpu], r_masked_vect);
/* Calculate new IRQ mask with these IRQs disabled. */
@@ -366,7 +366,7 @@ init_IRQ(void)
for (i = 0; i < 256; i++)
etrax_irv->v[i] = weird_irq;
- /* Point all IRQ's to bad handlers. */
+ /* Point all IRQs to bad handlers. */
for (i = FIRST_IRQ, j = 0; j < NR_IRQS; i++, j++) {
irq_desc[j].chip = &crisv32_irq_type;
set_exception_vector(i, interrupt[j]);
diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c
index 6326351..b72a155 100644
--- a/arch/cris/arch-v32/kernel/process.c
+++ b/arch/cris/arch-v32/kernel/process.c
@@ -162,7 +162,7 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
/* Put the switch stack right below the pt_regs. */
swstack = ((struct switch_stack *) childregs) - 1;
- /* Paramater to ret_from_sys_call. 0 is don't restart the syscall. */
+ /* Parameter to ret_from_sys_call. 0 is don't restart the syscall. */
swstack->r9 = 0;
/*
diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c
index 7cd6ac8..024cc69 100644
--- a/arch/cris/arch-v32/kernel/signal.c
+++ b/arch/cris/arch-v32/kernel/signal.c
@@ -347,7 +347,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
/* Grab and setup a signal frame.
*
* Basically a lot of state-info is stacked, and arranged for the
- * user-mode program to return to the kernel using either a trampiline
+ * user-mode program to return to the kernel using either a trampoline
* which performs the syscall sigreturn(), or a provided user-mode
* trampoline.
*/
@@ -641,7 +641,7 @@ ugdb_trap_user(struct thread_info *ti, int sig)
user_regs(ti)->spc = 0;
}
/* FIXME: Filter out false h/w breakpoint hits (i.e. EDA
- not withing any configured h/w breakpoint range). Synchronize with
+ not within any configured h/w breakpoint range). Synchronize with
what already exists for kernel debugging. */
if (((user_regs(ti)->exs & 0xff00) >> 8) == BREAK_8_INTR_VECT) {
/* Break 8: subtract 2 from ERP unless in a delay slot. */
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index 77e655f..b8c67f0 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -138,7 +138,7 @@ smp_boot_one_cpu(int cpuid)
return -1;
}
-/* Secondary CPUs starts uing C here. Here we need to setup CPU
+/* Secondary CPUs starts using C here. Here we need to setup CPU
* specific stuff such as the local timer and the MMU. */
void __init smp_callin(void)
{
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index be0a016..2f7e8e2 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -99,7 +99,7 @@ unsigned long do_slow_gettimeoffset(void)
/* From timer MDS describing the hardware watchdog:
* 4.3.1 Watchdog Operation
* The watchdog timer is an 8-bit timer with a configurable start value.
- * Once started the whatchdog counts downwards with a frequency of 763 Hz
+ * Once started the watchdog counts downwards with a frequency of 763 Hz
* (100/131072 MHz). When the watchdog counts down to 1, it generates an
* NMI (Non Maskable Interrupt), and when it counts down to 0, it resets the
* chip.
diff --git a/arch/cris/arch-v32/kernel/traps.c b/arch/cris/arch-v32/kernel/traps.c
index 2462b1e..17fd3db 100644
--- a/arch/cris/arch-v32/kernel/traps.c
+++ b/arch/cris/arch-v32/kernel/traps.c
@@ -105,7 +105,7 @@ bad_value:
/*
* This gets called from entry.S when the watchdog has bitten. Show something
- * similiar to an Oops dump, and if the kernel if configured to be a nice doggy;
+ * similar to an Oops dump, and if the kernel is configured to be a nice doggy;
* halt instead of reboot.
*/
void
diff --git a/arch/cris/arch-v32/lib/string.c b/arch/cris/arch-v32/lib/string.c
index 98e282a..6740b2c 100644
--- a/arch/cris/arch-v32/lib/string.c
+++ b/arch/cris/arch-v32/lib/string.c
@@ -41,7 +41,7 @@ void *memcpy(void *pdst,
Make sure the compiler is able to make something useful of this.
As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
- If gcc was allright, it really would need no temporaries, and no
+ If gcc was alright, it really would need no temporaries, and no
stack space to save stuff on. */
register void *return_dst __asm__ ("r10") = pdst;
diff --git a/arch/cris/arch-v32/lib/usercopy.c b/arch/cris/arch-v32/lib/usercopy.c
index f0b0846..04d0cf3 100644
--- a/arch/cris/arch-v32/lib/usercopy.c
+++ b/arch/cris/arch-v32/lib/usercopy.c
@@ -34,7 +34,7 @@ __copy_user (void __user *pdst, const void *psrc, unsigned long pn)
As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
FIXME: Comment for old gcc version. Check.
- If gcc was allright, it really would need no temporaries, and no
+ If gcc was alright, it really would need no temporaries, and no
stack space to save stuff on. */
register char *dst __asm__ ("r13") = pdst;
@@ -168,7 +168,7 @@ __copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
FIXME: Comment for old gcc version. Check.
- If gcc was allright, it really would need no temporaries, and no
+ If gcc was alright, it really would need no temporaries, and no
stack space to save stuff on. */
register char *dst __asm__ ("r13") = pdst;
@@ -332,7 +332,7 @@ __do_clear_user (void __user *pto, unsigned long pn)
As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
FIXME: Comment for old gcc version. Check.
- If gcc was allright, it really would need no temporaries, and no
+ If gcc was alright, it really would need no temporaries, and no
stack space to save stuff on. */
register char *dst __asm__ ("r13") = pto;
diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c
index c2d12e9..a076ef6 100644
--- a/arch/cris/arch-v32/mm/tlb.c
+++ b/arch/cris/arch-v32/mm/tlb.c
@@ -30,8 +30,8 @@ do { \
* The TLB can host up to 256 different mm contexts at the same time. The running
* context is found in the PID register. Each TLB entry contains a page_id that
* has to match the PID register to give a hit. page_id_map keeps track of which
- * mm's is assigned to which page_id's, making sure it's known when to
- * invalidate TLB entries.
+ * mm is assigned to which page_id, making sure it's known when to invalidate TLB
+ * entries.
*
* The last page_id is never running, it is used as an invalid page_id so that
* it's possible to make TLB entries that will nerver match.
@@ -188,7 +188,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
spin_unlock(&mmu_context_lock);
/*
- * Remember the pgd for the fault handlers. Keep a seperate copy of it
+ * Remember the pgd for the fault handlers. Keep a separate copy of it
* because current and active_mm might be invalid at points where
* there's still a need to derefer the pgd.
*/
diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c
index 903ea62..5c27ff8 100644
--- a/arch/cris/kernel/irq.c
+++ b/arch/cris/kernel/irq.c
@@ -7,7 +7,7 @@
* Authors: Bjorn Wesen (bjornw@axis.com)
*
* This file contains the code used by various IRQ handling routines:
- * asking for different IRQ's should be done through these routines
+ * asking for different IRQs should be done through these routines
* instead of just grabbing them. Thus setups with different IRQ numbers
* shouldn't result in any weird surprises, and installing new handlers
* should be easier.
@@ -15,7 +15,7 @@
*/
/*
- * IRQ's are in fact implemented a bit like signal handlers for the kernel.
+ * IRQs are in fact implemented a bit like signal handlers for the kernel.
* Naturally it's not a 1:1 relation, but there are similarities.
*/
@@ -83,9 +83,9 @@ skip:
/* called by the assembler IRQ entry functions defined in irq.h
- * to dispatch the interrupts to registred handlers
+ * to dispatch the interrupts to registered handlers
* interrupts are disabled upon entry - depending on if the
- * interrupt was registred with IRQF_DISABLED or not, interrupts
+ * interrupt was registered with IRQF_DISABLED or not, interrupts
* are re-enabled or not.
*/
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index c73e91f..01ff7c3 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -13,7 +13,7 @@
* Fixed warning.
*
* Revision 1.18 2005/01/12 08:10:14 starvik
- * Readded the change of frametype when handling kernel page fault fixup
+ * Re-added the change of frametype when handling kernel page fault fixup
* for v10. This is necessary to avoid that the CPU remakes the faulting
* access.
*
@@ -49,7 +49,7 @@
*
* Revision 1.8 2003/07/04 13:02:48 tobiasa
* Moved code snippet from arch/cris/mm/fault.c that searches for fixup code
- * to seperate function in arch-specific files.
+ * to separate function in arch-specific files.
*
* Revision 1.7 2003/01/22 06:48:38 starvik
* Fixed warnings issued by GCC 3.2.1
diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c
index b7842ff..0c833d1 100644
--- a/arch/cris/mm/init.c
+++ b/arch/cris/mm/init.c
@@ -8,7 +8,7 @@
*
* $Log: init.c,v $
* Revision 1.11 2004/05/28 09:28:56 starvik
- * Calculation of loops_per_usec moved because initalization order has changed
+ * Calculation of loops_per_usec moved because initialization order has changed
* in Linux 2.6.
*
* Revision 1.10 2004/05/14 07:58:05 starvik
diff --git a/arch/cris/mm/tlb.c b/arch/cris/mm/tlb.c
index c4a98e2..b7f8de5 100644
--- a/arch/cris/mm/tlb.c
+++ b/arch/cris/mm/tlb.c
@@ -16,7 +16,7 @@
/* The TLB can host up to 64 different mm contexts at the same time.
* The running context is R_MMU_CONTEXT, and each TLB entry contains a
* page_id that has to match to give a hit. In page_id_map, we keep track
- * of which mm's we have assigned which page_id's, so that we know when
+ * of which mm we have assigned to which page_id, so that we know when
* to invalidate TLB entries.
*
* The last page_id is never running - it is used as an invalid page_id
--
1.5.0.1
--
Simon Arlott
reply other threads:[~2007-05-11 19:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4644C6D6.9010101@simon.arlott.org.uk \
--to=simon@fire.lp0.eu \
--cc=dev-etrax@axis.com \
--cc=linux-kernel@vger.kernel.org \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.