From: Simon Arlott <simon@arlott.org>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
trivial@kernel.org
Subject: [PATCH] spelling fixes: mm/
Date: Fri, 11 May 2007 20:44:36 +0100 [thread overview]
Message-ID: <4644C7A4.6000008@simon.arlott.org.uk> (raw)
Spelling fixes in mm/.
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
---
mm/filemap.h | 2 +-
mm/hugetlb.c | 2 +-
mm/memory.c | 2 +-
mm/memory_hotplug.c | 2 +-
mm/mempool.c | 2 +-
mm/page-writeback.c | 2 +-
mm/page_alloc.c | 8 ++++----
mm/prio_tree.c | 2 +-
mm/readahead.c | 8 ++++----
mm/slab.c | 6 +++---
mm/slub.c | 2 +-
mm/sparse.c | 4 ++--
mm/swap.c | 2 +-
mm/vmalloc.c | 6 +++---
mm/vmscan.c | 2 +-
15 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/mm/filemap.h b/mm/filemap.h
index c2bff04..bfa76e1 100644
--- a/mm/filemap.h
+++ b/mm/filemap.h
@@ -22,7 +22,7 @@ __filemap_copy_from_user_iovec_inatomic(char *vaddr,
/*
* Copy as much as we can into the page and return the number of bytes which
- * were sucessfully copied. If a fault is encountered then clear the page
+ * were successfully copied. If a fault is encountered then clear the page
* out to (offset+bytes) and return the number of bytes which were copied.
*
* NOTE: For this to work reliably we really want copy_from_user_inatomic_nocache
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index eb7180d..f74f432 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -743,7 +743,7 @@ static long region_chg(struct list_head *head, long f, long t)
/* If we are below the current region then a new region is required.
* Subtle, allocate a new region at the position but make it zero
- * size such that we can guarentee to record the reservation. */
+ * size such that we can guarantee to record the reservation. */
if (&rg->link == head || t < rg->from) {
nrg = kmalloc(sizeof(*nrg), GFP_KERNEL);
if (nrg == 0)
diff --git a/mm/memory.c b/mm/memory.c
index 1d647ab..eaa3ddb 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2783,7 +2783,7 @@ int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, in
return 0;
down_read(&mm->mmap_sem);
- /* ignore errors, just check how much was sucessfully transfered */
+ /* ignore errors, just check how much was successfully transferred */
while (len) {
int bytes, ret, offset;
void *maddr;
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 8427912..bcd9841 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -118,7 +118,7 @@ int __add_pages(struct zone *zone, unsigned long phys_start_pfn,
err = __add_section(zone, i << PFN_SECTION_SHIFT);
/*
- * EEXIST is finally dealed with by ioresource collision
+ * EEXIST is finally dealt with by ioresource collision
* check. see add_memory() => register_memory_resource()
* Warning will be printed if there is collision.
*/
diff --git a/mm/mempool.c b/mm/mempool.c
index cc1ca86..37570cb 100644
--- a/mm/mempool.c
+++ b/mm/mempool.c
@@ -297,7 +297,7 @@ EXPORT_SYMBOL(mempool_free_slab);
/*
* A commonly used alloc and free fn that kmalloc/kfrees the amount of memory
- * specfied by pool_data
+ * specified by pool_data
*/
void *mempool_kmalloc(gfp_t gfp_mask, void *pool_data)
{
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 63cd888..059d56e 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -790,7 +790,7 @@ int __set_page_dirty_no_writeback(struct page *page)
* mapping is pinned by the vma's ->vm_file reference.
*
* We take care to handle the case where the page was truncated from the
- * mapping by re-checking page_mapping() insode tree_lock.
+ * mapping by re-checking page_mapping() inside tree_lock.
*/
int __set_page_dirty_nobuffers(struct page *page)
{
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index ae96dd8..e3699e8 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -107,7 +107,7 @@ static unsigned long __meminitdata dma_reserve;
#ifdef CONFIG_ARCH_POPULATES_NODE_MAP
/*
- * MAX_ACTIVE_REGIONS determines the maxmimum number of distinct
+ * MAX_ACTIVE_REGIONS determines the maximum number of distinct
* ranges of memory (RAM) that may be registered with add_active_range().
* Ranges passed to add_active_range() will be merged if possible
* so the number of times add_active_range() can be called is
@@ -1031,7 +1031,7 @@ int zone_watermark_ok(struct zone *z, int order, unsigned long mark,
* skip over zones that are not allowed by the cpuset, or that have
* been recently (in last second) found to be nearly full. See further
* comments in mmzone.h. Reduces cache footprint of zonelist scans
- * that have to skip over alot of full or unallowed zones.
+ * that have to skip over a lot of full or unallowed zones.
*
* If the zonelist cache is present in the passed in zonelist, then
* returns a pointer to the allowed node mask (either the current
@@ -1852,7 +1852,7 @@ void __meminit build_all_zonelists(void)
__build_all_zonelists(NULL);
cpuset_init_current_mems_allowed();
} else {
- /* we have to stop all cpus to guaranntee there is no user
+ /* we have to stop all cpus to guarantee there is no user
of zonelist */
stop_machine_run(__build_all_zonelists, NULL, NR_CPUS);
/* cpuset refresh routine should be here */
@@ -2266,7 +2266,7 @@ static int __meminit first_active_region_index_in_nid(int nid)
/*
* Basic iterator support. Return the next active range of PFNs for a node
- * Note: nid == MAX_NUMNODES returns next region regardles of node
+ * Note: nid == MAX_NUMNODES returns next region regardless of node
*/
static int __meminit next_active_region_index_in_nid(int index, int nid)
{
diff --git a/mm/prio_tree.c b/mm/prio_tree.c
index b4e76c2..603ae98 100644
--- a/mm/prio_tree.c
+++ b/mm/prio_tree.c
@@ -34,7 +34,7 @@
* Radix priority search tree for address_space->i_mmap
*
* For each vma that map a unique set of file pages i.e., unique [radix_index,
- * heap_index] value, we have a corresponing priority search tree node. If
+ * heap_index] value, we have a corresponding priority search tree node. If
* multiple vmas have identical [radix_index, heap_index] value, then one of
* them is used as a tree node and others are stored in a vm_set list. The tree
* node points to the first vma (head) of the list using vm_set.head.
diff --git a/mm/readahead.c b/mm/readahead.c
index 9861e88..974fc90 100644
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -96,7 +96,7 @@ static unsigned long get_init_ra_size(unsigned long size, unsigned long max)
/*
* Set the new window size, this is called only when I/O is to be submitted,
- * not for each call to readahead. If a cache miss occured, reduce next I/O
+ * not for each call to readahead. If a cache miss occurred, reduce next I/O
* size, else increase depending on how close to max we are.
*/
static inline unsigned long get_next_ra_size(struct file_ra_state *ra)
@@ -235,7 +235,7 @@ out:
*
* A `readahead hit' occurs when a read request is made against a page which is
* the next sequential page. Ahead window calculations are done only when it
- * is time to submit a new IO. The code ramps up the size agressively at first,
+ * is time to submit a new IO. The code ramps up the size aggressively at first,
* but slow down as it approaches max_readhead.
*
* Any seek/ramdom IO will result in readahead being turned off. It will resume
@@ -501,7 +501,7 @@ page_cache_readahead(struct address_space *mapping, struct file_ra_state *ra,
/*
* If the request size is larger than our max readahead, we
* at least want to be sure that we get 2 IOs in flight and
- * we know that we will definitly need the new I/O.
+ * we know that we will definitely need the new I/O.
* once we do this, subsequent calls should be able to overlap
* IOs,* thus preventing stalls. so issue the ahead window
* immediately.
@@ -526,7 +526,7 @@ page_cache_readahead(struct address_space *mapping, struct file_ra_state *ra,
/*
* If we get here we are doing sequential IO and this was not the first
- * occurence (ie we have an existing window)
+ * occurrence (ie we have an existing window)
*/
if (ra->ahead_start == 0) { /* no ahead window yet */
if (!make_ahead_window(mapping, filp, ra, 0))
diff --git a/mm/slab.c b/mm/slab.c
index 944b205..f19adfd 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -26,7 +26,7 @@
* initialized objects.
*
* This means, that your constructor is used only for newly allocated
- * slabs and you must pass objects with the same intializations to
+ * slabs and you must pass objects with the same initializations to
* kmem_cache_free.
*
* Each cache can only support one memory type (GFP_DMA, GFP_HIGHMEM,
@@ -1301,7 +1301,7 @@ static int __cpuinit cpuup_callback(struct notifier_block *nfb,
* structure is usually allocated from kmem_cache_create() and
* gets destroyed at kmem_cache_destroy().
*/
- /* fall thru */
+ /* fall through */
#endif
case CPU_UP_CANCELED:
case CPU_UP_CANCELED_FROZEN:
@@ -3856,7 +3856,7 @@ const char *kmem_cache_name(struct kmem_cache *cachep)
EXPORT_SYMBOL_GPL(kmem_cache_name);
/*
- * This initializes kmem_list3 or resizes varioius caches for all nodes.
+ * This initializes kmem_list3 or resizes various caches for all nodes.
*/
static int alloc_kmemlist(struct kmem_cache *cachep)
{
diff --git a/mm/slub.c b/mm/slub.c
index b39c8a6..355651b 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1780,7 +1780,7 @@ static struct kmem_cache_node * __init early_kmem_cache_node_alloc(gfp_t gfpflag
BUG_ON(kmalloc_caches->size < sizeof(struct kmem_cache_node));
page = new_slab(kmalloc_caches, gfpflags | GFP_THISNODE, node);
- /* new_slab() disables interupts */
+ /* new_slab() disables interrupts */
local_irq_enable();
BUG_ON(!page);
diff --git a/mm/sparse.c b/mm/sparse.c
index 6f3fff9..46c9fa8 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -101,7 +101,7 @@ static inline int sparse_index_init(unsigned long section_nr, int nid)
/*
* Although written for the SPARSEMEM_EXTREME case, this happens
- * to also work for the flat array case becase
+ * to also work for the flat array case because
* NR_SECTION_ROOTS==NR_MEM_SECTIONS.
*/
int __section_nr(struct mem_section* ms)
@@ -157,7 +157,7 @@ void __init memory_present(int nid, unsigned long start, unsigned long end)
}
/*
- * Only used by the i386 NUMA architecures, but relatively
+ * Only used by the i386 NUMA architectures, but relatively
* generic code.
*/
unsigned long __init node_memmap_size_bytes(int nid, unsigned long start_pfn,
diff --git a/mm/swap.c b/mm/swap.c
index d3cb966..0c09a51 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -5,7 +5,7 @@
*/
/*
- * This file contains the default values for the opereation of the
+ * This file contains the default values for the operation of the
* Linux VM subsystem. Fine-tuning documentation can be found in
* Documentation/sysctl/vm.txt.
* Started 18.12.91
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index faa2a52..1de2e9e 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -239,7 +239,7 @@ struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
}
/**
- * get_vm_area - reserve a contingous kernel virtual area
+ * get_vm_area - reserve a contiguous kernel virtual area
* @size: size of the area
* @flags: %VM_IOREMAP for I/O mappings or VM_ALLOC
*
@@ -295,7 +295,7 @@ found:
}
/**
- * remove_vm_area - find and remove a contingous kernel virtual area
+ * remove_vm_area - find and remove a continuous kernel virtual area
* @addr: base address
*
* Search for the kernel VM area starting at @addr, and remove it.
@@ -356,7 +356,7 @@ void __vunmap(void *addr, int deallocate_pages)
* vfree - release memory allocated by vmalloc()
* @addr: memory base address
*
- * Free the virtually contiguous memory area starting at @addr, as
+ * Free the virtually continuous memory area starting at @addr, as
* obtained from vmalloc(), vmalloc_32() or __vmalloc(). If @addr is
* NULL, no operation is performed.
*
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 1be5a63..6381692 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -159,7 +159,7 @@ EXPORT_SYMBOL(remove_shrinker);
* percentages of the lru and ageable caches. This should balance the seeks
* generated by these structures.
*
- * If the vm encounted mapped pages on the LRU it increase the pressure on
+ * If the vm encountered mapped pages on the LRU it increase the pressure on
* slab to avoid swapping.
*
* We do weird things to avoid (scanned*seeks*entries) overflowing 32 bits.
--
1.5.0.1
--
Simon Arlott
reply other threads:[~2007-05-11 19:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4644C7A4.6000008@simon.arlott.org.uk \
--to=simon@arlott.org \
--cc=linux-kernel@vger.kernel.org \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.