All of lore.kernel.org
 help / color / mirror / Atom feed
From: Albert Lee <albertcc@tw.ibm.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>, Alan Cox <alan@lxorguk.ukuu.org.uk>,
	Linux IDE <linux-ide@vger.kernel.org>,
	Doug Maxey <dwm@maxeymade.com>,
	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
	Mark Lord <liml@rtr.ca>
Subject: [PATCH 2/8] libata: move ata_altstatus() out from ata_hsm_move() to the pio data xfer functions
Date: Wed, 16 May 2007 15:11:40 +0800	[thread overview]
Message-ID: <464AAEAC.20708@tw.ibm.com> (raw)
In-Reply-To: <464AACDF.1030903@tw.ibm.com>

patch 2/8:
 Move ata_altstatus() out from ata_hsm_move() to the pio data xfer functions,
like ata_pio_sectors() and atapi_pio_bytes() that know better if ata_altstatus() is needed.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
---
atapi_send_cdb() already did ata_altstatus() in itself.
This patch makes ata_pio_sector(), ata_pio_sectors() and atapi_pio_bytes() do the same.

diff -Nrup 01_flush_fix/drivers/ata/libata-core.c 02_smart_flush/drivers/ata/libata-core.c
--- 01_flush_fix/drivers/ata/libata-core.c	2007-05-15 10:05:33.000000000 +0800
+++ 02_smart_flush/drivers/ata/libata-core.c	2007-05-16 10:37:53.000000000 +0800
@@ -4435,6 +4435,7 @@ void ata_data_xfer_noirq(struct ata_devi
 /**
  *	ata_pio_sector - Transfer a sector of data.
  *	@qc: Command on going
+ *	@drq_last: Last sector of pio DRQ transfer
  *
  *	Transfer qc->sect_size bytes of data from/to the ATA device.
  *
@@ -4442,7 +4443,7 @@ void ata_data_xfer_noirq(struct ata_devi
  *	Inherited from caller.
  */
 
-static void ata_pio_sector(struct ata_queued_cmd *qc)
+static void ata_pio_sector(struct ata_queued_cmd *qc, int drq_last)
 {
 	int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
 	struct scatterlist *sg = qc->__sg;
@@ -4480,6 +4481,9 @@ static void ata_pio_sector(struct ata_qu
 		ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write);
 	}
 
+	if (drq_last)
+		ata_altstatus(ap); /* flush */
+
 	qc->curbytes += qc->sect_size;
 	qc->cursg_ofs += qc->sect_size;
 
@@ -4511,9 +4515,9 @@ static void ata_pio_sectors(struct ata_q
 		nsect = min((qc->nbytes - qc->curbytes) / qc->sect_size,
 			    qc->dev->multi_count);
 		while (nsect--)
-			ata_pio_sector(qc);
+			ata_pio_sector(qc, !nsect);
 	} else
-		ata_pio_sector(qc);
+		ata_pio_sector(qc, 1);
 }
 
 /**
@@ -4596,6 +4600,7 @@ next_sg:
 		for (i = 0; i < words; i++)
 			ap->ops->data_xfer(qc->dev, (unsigned char*)pad_buf, 2, do_write);
 
+		ata_altstatus(ap); /* flush */
 		ap->hsm_task_state = HSM_ST_LAST;
 		return;
 	}
@@ -4645,6 +4650,8 @@ next_sg:
 
 	if (bytes)
 		goto next_sg;
+
+	ata_altstatus(ap); /* flush */
 }
 
 /**
@@ -4861,7 +4868,6 @@ fsm_start:
 			 */
 			ap->hsm_task_state = HSM_ST;
 			ata_pio_sectors(qc);
-			ata_altstatus(ap); /* flush */
 		} else
 			/* send CDB */
 			atapi_send_cdb(ap, qc);
@@ -4942,7 +4948,6 @@ fsm_start:
 
 				if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
 					ata_pio_sectors(qc);
-					ata_altstatus(ap);
 					status = ata_wait_idle(ap);
 				}
 
@@ -4962,13 +4967,11 @@ fsm_start:
 			if (ap->hsm_task_state == HSM_ST_LAST &&
 			    (!(qc->tf.flags & ATA_TFLAG_WRITE))) {
 				/* all data read */
-				ata_altstatus(ap);
 				status = ata_wait_idle(ap);
 				goto fsm_start;
 			}
 		}
 
-		ata_altstatus(ap); /* flush */
 		poll_next = 1;
 		break;
 



  parent reply	other threads:[~2007-05-16  7:11 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-05-16  7:03 [PATCH/RFC 0/8] libata: delegate irq driven pio to workqueue (take 2) Albert Lee
2007-05-16  7:09 ` [PATCH 1/8] libata: fix the ata_altstatus() in ata_hsm_qc_complete() Albert Lee
2007-05-16  7:11 ` Albert Lee [this message]
2007-05-16  7:13 ` [PATCH 3/8] libata: change the state after "PIO data-in" to HSM_ST_IDLE instead of HSM_ST_LAST Albert Lee
2007-05-16  7:18 ` [PATCH 4/8] libata: move and reduce locking to the pio data xfer functions Albert Lee
2007-05-16  7:20 ` [PATCH 5/8] libata: ack unsolicited INTRQ when polling Albert Lee
2007-05-16  7:23 ` [PATCH 6/8] libata: delegate irq driven pio to workqueue Albert Lee
2007-05-16  7:24 ` [PATCH 7/8] libata: fix ata_port_flush_task() for irq pio delegation Albert Lee
2007-05-16  7:29 ` [PATCH 8/8] libata: ack more unsolicited INTRQ Albert Lee
2007-05-16 13:02   ` Alan Cox
2007-05-17  8:59     ` Albert Lee
2007-05-17  9:25       ` Tejun Heo
2007-05-17 15:42         ` Mark Lord
2007-05-17 15:50           ` Tejun Heo
2007-05-17 16:00           ` Alan Cox
2007-05-17  9:28       ` Alan Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=464AAEAC.20708@tw.ibm.com \
    --to=albertcc@tw.ibm.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=albertl@mail.com \
    --cc=bzolnier@gmail.com \
    --cc=dwm@maxeymade.com \
    --cc=htejun@gmail.com \
    --cc=jeff@garzik.org \
    --cc=liml@rtr.ca \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.