From mboxrd@z Thu Jan 1 00:00:00 1970 From: Philip Pokorny Date: Wed, 16 May 2007 21:16:16 +0000 Subject: Re: [lm-sensors] k8temp Message-Id: <464B74A0.7010204@penguincomputing.com> List-Id: References: <200703212247.05783.tomcw@adelphia.net> In-Reply-To: <200703212247.05783.tomcw@adelphia.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org >>raw data drawn from a PCI inspection ..... >> >>$ sudo setpci -s 00:18.3 e4.Bz >> >> > >So you are not setting this as the reg value but this is just a result (7a) > > No, that command *writes* 7A to PCI space register offset E4. >>$ sudo lspci -s 00:18.3 -xxx >>00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control >>e0: 00 00 00 00 7a 20 28 00 19 17 00 00 00 00 00 00 >> >> Which values are of interest here? Do you know that you can read PCI space using setpci like so: [root@beluga ~]# setpci -v -s 00:18.3 e4.b e4.w e6.w 00:18.3:e4 = 20 00:18.3:e4 = 0f20 00:18.3:e6 = 164c _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors