All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Feig <feig@nnytech.net>
To: BlueZ development <bluez-devel@lists.sourceforge.net>
Subject: [Bluez-devel]  Frequent headset disconnects
Date: Thu, 17 May 2007 11:34:46 -0400	[thread overview]
Message-ID: <464C7616.9070900@nnytech.net> (raw)
In-Reply-To: <200705171521.38889.bluez-devel@huitl.de>

Hello,
I've been using the a2dpd app for a couple of weeks now, and really like 
it. I have a few issues though, with the main one being that after a 
couple of minutes of playback, my headphones (HT820) turn off, I turn 
them back on, and playback continues. I use these things long periods of 
time with my iPod and a Jabra a2dp adapter, I can listen for hours on an 
a2dp connection with those without interruption (aside from the 
occasional phone call). But within a couple of minutes using the a2dpd 
app (and amarok or mplayer), the connection gets really choppy, then 
drops out, and I have to turn _on_ my headphones. As you might guess, 
this is a show stopper for me, as I can't really enjoy listening to 
music wirelessly if I can't get through an entire song without turning 
my headphones back on.

Any ideas on why this is happening would be helpful, as right now, I 
don't even know where to start looking. Here's the output when it fails:

A2DPD[11:10:02.275]: a2dp_transfer_raw: Wrote -1 not 603 bytes (sbc.len=118)
A2DPD[11:10:02.275]: transfer_outgoing_packets: Error in transfer 
(transfer=-1)
A2DPD[11:10:02.275]: a2dp_state_disconnect: State 
AVDTP_STATEX_STREAM_CLOSING
A2DPD[11:10:02.275]: a2dp_state_machine: State 
AVDTP_STATEX_STREAM_CLOSING_WAIT
A2DPD[11:10:02.275]: a2dpd_signal_state: Connecting 00:07:A4:B8:68:8F
A2DPD[11:10:05.005]: a2dp_state_machine: Too many answer for AVDTP_CLOSE
A2DPD[11:10:05.005]: a2dp_state_machine: State AVDTP_STATEX_DISCONNECTING
A2DPD[11:10:05.005]: a2dp_disconnect:
A2DPD[11:10:05.005]: a2dp_stream_stop: Closing stream socket 12
A2DPD[11:10:05.005]: a2dp_stream_stop: Closed
A2DPD[11:10:05.005]: a2dp_stream_stop: State AVDTP_STATE_IDLE
A2DPD[11:10:05.005]: a2dp_disconnect: Closing ctl socket 10
A2DPD[11:10:05.005]: a2dp_disconnect: Closed
A2DPD[11:10:05.005]: a2dp_disconnect: State AVDTP_STATE_DISCONNECTED
A2DPD[11:10:05.005]: a2dpd_signal_state: Disconnected
A2DPD[11:10:05.005]: a2dp_state_connect: State AVDTP_STATEX_SDP_CONNECTING
A2DPD[11:10:05.005]: a2dp_state_machine: Role is INITIATOR
A2DPD[11:10:05.005]: a2dp_state_machine: SDP connection on socket 10
A2DPD[11:10:05.005]: a2dp_state_machine: State 
AVDTP_STATEX_SDP_CONNECTING_WAIT
A2DPD[11:10:05.005]: a2dpd_signal_state: Connecting 00:07:A4:B8:68:8F
A2DPD[11:10:11.515]: a2dp_state_machine: SDP connection terminated
A2DPD[11:10:11.515]: a2dp_state_machine: (errno=110:Connection timed 
out)SDP connection failed
A2DPD[11:10:11.515]: a2dp_state_machine: State AVDTP_STATEX_DISCONNECTING
A2DPD[11:10:11.515]: a2dp_disconnect:
A2DPD[11:10:11.516]: a2dp_stream_stop: Closing stream socket -1
A2DPD[11:10:11.516]: a2dp_stream_stop: Closed
A2DPD[11:10:11.516]: a2dp_stream_stop: State AVDTP_STATE_IDLE
A2DPD[11:10:11.516]: a2dp_disconnect: Closing ctl socket -1
A2DPD[11:10:11.516]: a2dp_disconnect: Closed
A2DPD[11:10:11.516]: a2dp_disconnect: State AVDTP_STATE_DISCONNECTED
A2DPD[11:10:11.516]: a2dpd_signal_state: Disconnected
A2DPD[11:10:11.523]: a2dp_state_connect: State AVDTP_STATEX_SDP_CONNECTING
A2DPD[11:10:11.524]: a2dp_state_machine: Role is INITIATOR
A2DPD[11:10:11.524]: a2dp_state_machine: SDP connection on socket 10
A2DPD[11:10:11.524]: a2dp_state_machine: State 
AVDTP_STATEX_SDP_CONNECTING_WAIT
A2DPD[11:10:11.524]: a2dpd_signal_state: Connecting 00:07:A4:B8:68:8F

Thank you, I appreciate your help,
John

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

  reply	other threads:[~2007-05-17 15:34 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-05-17  0:07 [Bluez-devel] headsetd has problems serving two applications at a time Robert Huitl
2007-05-17  3:42 ` Brad Midgley
2007-05-17  7:51   ` Tim Chick
2007-05-17 13:21   ` Robert Huitl
2007-05-17 15:34     ` John Feig [this message]
2007-05-18 13:13       ` [Bluez-devel] Frequent headset disconnects Brad Midgley
2007-05-18 15:56         ` John Feig
2007-05-18 19:17           ` [Bluez-devel] RE : " Frederic Dalleau
2007-05-22 14:31             ` John Feig
2007-05-22 17:51               ` John Feig
2007-05-24 13:24     ` [Bluez-devel] headsetd has problems serving two applications at a time Brad Midgley
2007-05-24 16:28       ` Marc-André Lureau
2007-05-24 18:45       ` Robert Huitl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=464C7616.9070900@nnytech.net \
    --to=feig@nnytech.net \
    --cc=bluez-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.