Re: [PATCH] e1000: Work around 82571 completion timout on Pseries HW

[Jeff Garzik <jeff@garzik.org>]

Auke Kok wrote:
> Our 82571 (first PCI-E hardware) causes P-Series hardware to throw
> issues. Disabling PCI-E completion timeouts in our NIC resolves
> the issue.
> 
> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
> Cc: Wen Xiong <wenxiong@us.ibm.com>
> ---
> 
>  drivers/net/e1000/e1000_main.c |   10 ++++++++++
>  1 files changed, 10 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
> index 49be393..830d851 100644
> --- a/drivers/net/e1000/e1000_main.c
> +++ b/drivers/net/e1000/e1000_main.c
> @@ -819,6 +819,16 @@ e1000_reset(struct e1000_adapter *adapter)
>  		E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
>  	}
>  
> +#if defined(CONFIG_PPC64) || defined(CONFIG_PPC)
> +#define E1000_GCR_DISABLE_TIMEOUT_MECHANISM 0x80000000
> +	if (adapter->hw.mac.type == e1000_82571) {
> +		/* work around pSeries hardware by disabling timeouts */
> +		u32 gcr = E1000_READ_REG(&adapter->hw, E1000_GCR);
> +		gcr |= E1000_GCR_DISABLE_TIMEOUT_MECHANISM;
> +		E1000_WRITE_REG(&adapter->hw, E1000_GCR, gcr);
> +	}
> +#endif

not applied.  based on the conversation, it sounds like this is not 
specific to PPC

	Jeff