From: Davi Arnaut <davi@haxent.com.br>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Davide Libenzi <davidel@xmailserver.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [PATCH] signalfd: retrieve multiple signals with one read() call
Date: Sat, 19 May 2007 21:07:11 -0300 [thread overview]
Message-ID: <464F912F.3040205@haxent.com.br> (raw)
Hi,
Gathering signals in bulk enables server applications to drain a signal
queue (almost full of realtime signals) more efficiently by reducing the
syscall and file look-up overhead.
Very similar to the sigtimedwait4() call described by Niels Provos,
Chuck Lever, and Stephen Tweedie in a paper entitled "Analyzing the
Overload Behavior of a Simple Web Server". The paper lists more details
and advantages.
Signed-off-by: Davi E. M. Arnaut <davi@haxent.com.br>
diff --git a/fs/signalfd.c b/fs/signalfd.c
index 7cfeab4..f6303c5 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -11,6 +11,8 @@
* Now using anonymous inode source.
* Thanks to Oleg Nesterov for useful code review and suggestions.
* More comments and suggestions from Arnd Bergmann.
+ * Sat May 19, 2007: Davi E. M. Arnaut <davi@haxent.com.br>
+ * Retrieve multiple signals with one read() call
*/
#include <linux/file.h>
@@ -206,6 +208,64 @@ static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo,
return err ? -EFAULT: sizeof(*uinfo);
}
+static ssize_t signalfd_dequeue(struct signalfd_ctx *ctx, siginfo_t *info,
+ int nonblock)
+{
+ int locked;
+ ssize_t ret;
+ struct signalfd_lockctx lk;
+ DECLARE_WAITQUEUE(wait, current);
+
+ locked = signalfd_lock(ctx, &lk);
+ if (!locked)
+ return 0;
+
+ ret = dequeue_signal(lk.tsk, &ctx->sigmask, info);
+ switch (ret) {
+ case 0:
+ if (!nonblock)
+ break;
+ ret = -EAGAIN;
+ default:
+ signalfd_unlock(&lk);
+ return ret;
+ }
+
+ add_wait_queue(&ctx->wqh, &wait);
+ for (;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ ret = dequeue_signal(lk.tsk, &ctx->sigmask, info);
+ if (ret != 0)
+ break;
+ if (signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+ }
+ signalfd_unlock(&lk);
+ schedule();
+ locked = signalfd_lock(ctx, &lk);
+ if (unlikely(!locked)) {
+ /*
+ * Let the caller read zero byte, ala socket
+ * recv() when the peer disconnect. This test
+ * must be done before doing a dequeue_signal(),
+ * because if the sighand has been orphaned,
+ * the dequeue_signal() call is going to crash.
+ */
+ ret = 0;
+ break;
+ }
+ }
+
+ remove_wait_queue(&ctx->wqh, &wait);
+ __set_current_state(TASK_RUNNING);
+
+ if (likely(locked))
+ signalfd_unlock(&lk);
+
+ return ret;
+}
+
/*
* Returns either the size of a "struct signalfd_siginfo", or zero if the
* sighand we are attached to, has been orphaned. The "count" parameter
@@ -215,55 +275,30 @@ static ssize_t signalfd_read(struct file *file, char __user *buf, size_t count,
loff_t *ppos)
{
struct signalfd_ctx *ctx = file->private_data;
- ssize_t res = 0;
- int locked, signo;
+ struct signalfd_siginfo __user *siginfo;
+ int nonblock = file->f_flags & O_NONBLOCK;
+ ssize_t ret, total = 0;
siginfo_t info;
- struct signalfd_lockctx lk;
- DECLARE_WAITQUEUE(wait, current);
- if (count < sizeof(struct signalfd_siginfo))
+ count /= sizeof(struct signalfd_siginfo);
+ if (!count)
return -EINVAL;
- locked = signalfd_lock(ctx, &lk);
- if (!locked)
- return 0;
- res = -EAGAIN;
- signo = dequeue_signal(lk.tsk, &ctx->sigmask, &info);
- if (signo == 0 && !(file->f_flags & O_NONBLOCK)) {
- add_wait_queue(&ctx->wqh, &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- signo = dequeue_signal(lk.tsk, &ctx->sigmask, &info);
- if (signo != 0)
- break;
- if (signal_pending(current)) {
- res = -ERESTARTSYS;
- break;
- }
- signalfd_unlock(&lk);
- schedule();
- locked = signalfd_lock(ctx, &lk);
- if (unlikely(!locked)) {
- /*
- * Let the caller read zero byte, ala socket
- * recv() when the peer disconnect. This test
- * must be done before doing a dequeue_signal(),
- * because if the sighand has been orphaned,
- * the dequeue_signal() call is going to crash.
- */
- res = 0;
- break;
- }
- }
- remove_wait_queue(&ctx->wqh, &wait);
- __set_current_state(TASK_RUNNING);
- }
- if (likely(locked))
- signalfd_unlock(&lk);
- if (likely(signo))
- res = signalfd_copyinfo((struct signalfd_siginfo __user *) buf,
- &info);
- return res;
+ siginfo = (struct signalfd_siginfo __user *) buf;
+
+ do {
+ ret = signalfd_dequeue(ctx, &info, nonblock);
+ if (unlikely(ret <= 0))
+ break;
+ ret = signalfd_copyinfo(siginfo, &info);
+ if (ret < 0)
+ break;
+ siginfo++;
+ total += ret;
+ nonblock = 1;
+ } while (--count);
+
+ return total ? total : ret;
}
static const struct file_operations signalfd_fops = {
next reply other threads:[~2007-05-20 0:07 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-20 0:07 Davi Arnaut [this message]
2007-05-20 19:17 ` [PATCH] signalfd: retrieve multiple signals with one read() call Davide Libenzi
2007-05-21 4:02 ` Andrew Morton
2007-05-21 4:14 ` Davide Libenzi
2007-05-21 4:20 ` Davide Libenzi
2007-05-21 4:26 ` Andrew Morton
2007-05-21 5:05 ` Davide Libenzi
2007-05-21 5:12 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=464F912F.3040205@haxent.com.br \
--to=davi@haxent.com.br \
--cc=akpm@linux-foundation.org \
--cc=davidel@xmailserver.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.