Re: [Fwd: Re: Zaptel PCI IRQ problem]

["François Delawarde" <fdelawarde@wirelessmundi.com>]

[-- Attachment #1.1: Type: text/plain, Size: 7402 bytes --]

Thanks for answering,

I'm not sure Dom0 has its own CPU in that case, but the problem happens 
when I don't have DomUs (the problem is not that much worse with DomUs 
installed). That's why I don't really understand why I have those 
latency problems with interrupts, as a normal Linux kernel behaves 
perfectly when loaded (no IRQ loss).

I don't think scheduling is in cause here. Of course with better 
scheduling, there would be less load and it would 'betterize' my case, 
but the main problem seam to be where interrupts are handled.

Do you think there is anything I could try? Oh, and I tried with 3.1 
this morning (with basic 2.6.18 Xen kernel without any customization), 
and for now on, the same problems without a single DomU.

François.



Petersson, Mats wrote:
>> -----Original Message-----
>> From: xen-devel-bounces@lists.xensource.com 
>> [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of 
>> François Delawarde
>> Sent: 21 May 2007 15:20
>> To: xen-devel@lists.xensource.com
>> Subject: [Fwd: Re: [Xen-devel] Zaptel PCI IRQ problem]
>>
>> Hi,
>>
>> Sorry to insist, but I would really like to be able to use Xen and my 
>> zaptel hardware all together in Dom0. I was just wondering if the 3.1 
>> release could contain some changes compared to 3.0.4 related to IRQ 
>> handling or scheduling that could workout my problem.
>>     
>
> As far as I can see, there's no improvement in 3.1 over 3.0.4 as to how interrupts are handled or how the scheduling works [I'm not really sure how that could practically be improved wihtout loosing performance elsewhere - this is a case of "you can make it right for some people some of the time, but not all people all of the time"]. 
>
> This can possibly be solved by restricting which other domains run on the same CPU as Dom0. However, there will certainly be some load on Dom0 because of qemu-dm being there, but unless you're running disk or network benchmarks on your DomU, you should have reasonable performance in Dom0 without much effort. 
>
> If you share the Dom0 CPU with DomU's, then you have little chance to get it to wrok. 
>
> All this is assuming I understand correctly that the real problem here is that the latency between the interrupt and the actual code executing in user-mode is the key to the problem. Making sure Dom0 runs on it's own CPU will make sure that there's very little overhead compared to native. 
>
> --
> Mats
>   
>> Thanks,
>> François.
>>
>> ----
>>
>> I actually first asked to asterisk mailing lists, and a few 
>> persons told 
>> me that it was Xen's fault, as it was not yet 'mature' enough 
>> to have a 
>> good IRQ handling under load.
>>
>> Note that I made tests the last few days as I wasn't sure if 
>> it was Xen 
>> or not, and the exact same system works perfectly with a normal Linux 
>> kernel (same config file except for Xen stuff that are 
>> removed). A Dom-0 
>> kernel without any VMs running comports itself the way I described 
>> (bad), and I tried both schedulers (sedf and credit) without success.
>>
>> It doesn't appear to be a load problem as the load is about the same 
>> with the non-Xen kernel I tried, but with IRQ handling in 
>> load period. 
>> I'm talking about a machine that is certainly not 
>> over-loaded, but that 
>> once in a while suffers some iowait for disk access. Under 
>> Xen kernel, 
>> if I kill everything I can and only leave Asterisk with at most one 
>> simultaneous conversation, it works quite nice.
>>
>> I'm using the debian (I think they actually come from fedora) patches 
>> for 2.6.18, and just want to know if this issue is known or has/will 
>> been/be resolved somehow in future versions, if there is anyway I can 
>> deal with it with some kernel configuration, or if I should 
>> wait a few 
>> months/years more to be able to use Xen in my specific setting.
>>
>> Thanks,
>> François.
>>
>>
>> Ian Pratt wrote:
>>     
>>>> I'm currently trying to run an Asterisk server in a Xen 
>>>>         
>> kernel under
>>     
>>>> Dom0 (debian kernel 2.6.18 with xen hypervisor 3.0.4). I 
>>>>         
>> had read of
>>     
>>>> some possible timing issues with ztdummy (using rtc) under 
>>>>         
>> DomU, but I
>>     
>>>> have a zaptel compatible PCI card (TDM400P), and I experience big
>>>> problems with IRQ misses every time there is a bit of load 
>>>>         
>> on the server
>>     
>>>> (for example, when an HVM DomU is running). The card is supposed to
>>>> report 1000 interruptions per second, but it doesn't, and 
>>>>         
>> consequences
>>     
>>>> are horrible crackling sound in communications. Running the utility
>>>> zttest to check for the stability of those interrupts 
>>>>         
>> under a small bit
>>     
>>>> of load, i get:
>>>>     
>>>>         
>>> I believe folk have had success running asterisk in a domU 
>>>       
>> and assigning the PCI device directly to the guest. It's best 
>> to set the affinity masks for other guests and dom0 such that 
>> the domU with asterisk in it has a dedicated physical CPU core. 
>>     
>>> We ran asterisk on an older version of Xen without any 
>>>       
>> problems, and nothing has changed that should effect xen's 
>> ability to do this. [you could try using the sedf scheduler 
>> if you still have problems with 'credit']
>>     
>>> Ian
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>>   
>>>       
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>>
>>
>>     
>
>
>
>   

-- 

 _________________________

François Delawarde

Ingeniero de red

Tel: 918.03.92.51

E-mail: fdelawarde@wirelessmundi.com <mailto:fdelawarde@wirelessmundi.com>

 _________________________

WIRELESS MUNDI

http://www.wirelessmundi.com/

C/Isaac Newton, 1 - Oficina 26 · Parque Tecnológico de Madrid

28760 TRES CANTOS (Madrid)

Tlf./Fax: (+34) 918 03 92 51

------------------------------------------------------------------------

La información contenida en este mensaje y en sus archivos adjuntos es 
CONFIDENCIAL y se dirige exclusivamente a sus destinatarios. Queda 
expresamente prohibida la utilización de la misma por cualquier persona 
distinta de los destinatarios de esta comunicación. Si usted ha recibido 
este mensaje por error le rogamos que lo comunique inmediatamente a 
WIRELESS MUNDI y lo borre al igual que todos sus documentos adjuntos. El 
correo electrónico no puede asegurar la confidencialidad ni la 
integridad de sus mensajes por lo que WIRELESS MUNDI no se hace 
responsable de tales errores u omisiones.

----------0----------

All information in this message and its attachments is confidential and 
may be legally privileged. Only intended recipients are authorized to 
use it. If you have received this transmission in error, please notify 
WIRELESS MUNDI immediately and delete this message and its attachments. 
E-mail transmissions are not guaranteed to be secure or error free and 
WIRELESS MUNDI does not accept liability for such errors or omissions.

------------------------------------------------------------------------

[-- Attachment #1.2: Type: text/html, Size: 10927 bytes --]

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel