All of lore.kernel.org
 help / color / mirror / Atom feed
From: xianghua xiao <x.xiao@freescale.com>
To: Zhang Wei <wei.zhang@freescale.com>
Cc: linuxppc-dev@ozlabs.org, paulus@samba.org
Subject: Re: [PATCH 2/5] Add uli1575 pci-bridge sector to MPC8641HPCN dts file.
Date: Tue, 22 May 2007 15:37:52 -0500	[thread overview]
Message-ID: <465354A0.5020502@freescale.com> (raw)
In-Reply-To: <1179805110272-git-send-email-wei.zhang@freescale.com>

where is the new uli1575 node referred except for this added snippet?
thanks,
xianghua

Zhang Wei wrote:

>Add uli1575 pci-bridge sector. It fixes the issue of ULI1575 not found on rev.2 board.
>
>Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
>---
> arch/powerpc/boot/dts/mpc8641_hpcn.dts      |    6 ++++++
> arch/powerpc/boot/dts/mpc8641_hpcn_srio.dts |    6 ++++++
> 2 files changed, 12 insertions(+), 0 deletions(-)
>
>diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
>index 260b264..04626b1 100644
>--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
>+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
>@@ -297,6 +297,12 @@
> 				interrupts = <49 2>;
> 				interrupt-parent = <&mpic>;
> 			};
>+			uli1575: uli1575@100 {
>+				reg = <0 0 0 0 0>;
>+				pci_bridge@200 {
>+					reg = <0 0 0 0 0>;
>+				};
>+			};
> 
> 		};
> 
>  
>

  parent reply	other threads:[~2007-05-22 20:42 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-05-22  3:38 [PATCH 0/5] Add the support for MPC8641 silicon rev 2.0 and MPC8641HPCN board 2.0 Zhang Wei
2007-05-22  3:38 ` [PATCH 1/5] Remove the errata fix codes for MPC8641 silicon ver 1.0 which is end of life Zhang Wei
2007-05-22  3:38   ` [PATCH 2/5] Add uli1575 pci-bridge sector to MPC8641HPCN dts file Zhang Wei
2007-05-22  3:38     ` [PATCH 3/5] Float the pci bus number on MPC8641HPCN board Zhang Wei
2007-05-22  3:38       ` [PATCH 4/5] Set RC of mpc8641 to transparent bridge for transfer legacy I/O access Zhang Wei
2007-05-22  3:38         ` [PATCH 5/5] Set IDE in ULI1575 to not native mode Zhang Wei
2007-05-29 18:15           ` Jon Loeliger
2007-05-29 20:50           ` Kumar Gala
2007-05-30  2:25             ` Zhang Wei-r63237
2007-05-30 11:40               ` Benjamin Herrenschmidt
2007-05-31  2:00                 ` Zhang Wei-r63237
2007-05-30 11:18             ` Benjamin Herrenschmidt
2007-05-29 18:15         ` [PATCH 4/5] Set RC of mpc8641 to transparent bridge for transfer legacy I/O access Jon Loeliger
2007-05-22 17:59       ` [PATCH 3/5] Float the pci bus number on MPC8641HPCN board Wade Farnsworth
2007-05-23  3:35         ` Zhang Wei-r63237
2007-05-31 13:43           ` Kumar Gala
2007-06-01  2:01             ` Zhang Wei-r63237
2007-06-01  5:08               ` Kumar Gala
2007-06-01  6:28                 ` Paul Mackerras
2007-06-01  6:45                   ` Zhang Wei-r63237
2007-06-01  7:44                     ` Benjamin Herrenschmidt
2007-06-01  7:53                       ` Zhang Wei-r63237
2007-06-01  8:00                         ` Benjamin Herrenschmidt
2007-06-01 16:35                       ` Matt Sealey
2007-06-01 16:47                         ` Jon Loeliger
2007-06-01 22:41                           ` Benjamin Herrenschmidt
2007-06-01 22:41                         ` Benjamin Herrenschmidt
2007-06-02  8:36                           ` Segher Boessenkool
2007-06-02  8:55                             ` Benjamin Herrenschmidt
2007-06-01 19:58                     ` Kumar Gala
2007-06-01 23:28                       ` Benjamin Herrenschmidt
2007-06-04 19:00                         ` Jon Loeliger
2007-06-04 22:24                           ` Benjamin Herrenschmidt
2007-06-01  6:29                 ` Zhang Wei-r63237
2007-05-29 18:14       ` Jon Loeliger
2007-05-22 20:37     ` xianghua xiao [this message]
2007-05-23  3:38       ` [PATCH 2/5] Add uli1575 pci-bridge sector to MPC8641HPCN dts file Zhang Wei-r63237
2007-05-29 18:14     ` Jon Loeliger
2007-05-29 20:39     ` Kumar Gala
2007-05-30 10:02       ` Zhang Wei-r63237
2007-05-30 10:18         ` Segher Boessenkool
2007-05-30 11:07         ` Benjamin Herrenschmidt
2007-05-30 22:26       ` Wade Farnsworth
2007-05-29 18:13   ` [PATCH 1/5] Remove the errata fix codes for MPC8641 silicon ver 1.0 which is end of life Jon Loeliger
2007-05-22  3:53 ` [PATCH 0/5] Add the support for MPC8641 silicon rev 2.0 and MPC8641HPCN board 2.0 Kumar Gala
2007-05-22  4:46   ` Zhang Wei-r63237
2007-05-22 12:54     ` Kumar Gala
2007-05-22 16:28 ` Jon Loeliger
2007-05-22 17:47 ` Wade Farnsworth
2007-05-23  2:48   ` [PATCH 0/5] Add the support for MPC8641 silicon rev 2.0 andMPC8641HPCN " Zhang Wei-r63237
2007-05-23 22:37     ` Wade Farnsworth
2007-05-29 18:12 ` [PATCH 0/5] Add the support for MPC8641 silicon rev 2.0 and MPC8641HPCN " Jon Loeliger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=465354A0.5020502@freescale.com \
    --to=x.xiao@freescale.com \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=paulus@samba.org \
    --cc=wei.zhang@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.