From: "Antonino A. Daplas" <adaplas@gmail.com>
To: Andrew Morton <akpm@osdl.org>
Cc: Linux Fbdev development list <linux-fbdev-devel@lists.sourceforge.net>
Subject: [PATCH 6/9] fbcon: Use struct device instead of struct class_device
Date: Sun, 27 May 2007 08:50:56 +0800 [thread overview]
Message-ID: <4658D5F0.5050300@gmail.com> (raw)
Port fbcon.c to use struct device from using struct class_device
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
---
drivers/video/console/fbcon.c | 57 +++++++++++++++++++++--------------------
1 files changed, 29 insertions(+), 28 deletions(-)
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index b7e143e..7f4ed79 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -198,7 +198,7 @@ static void fbcon_modechanged(struct fb_
static void fbcon_set_all_vcs(struct fb_info *info);
static void fbcon_start(void);
static void fbcon_exit(void);
-static struct class_device *fbcon_class_device;
+static struct device *fbcon_device;
#ifdef CONFIG_MAC
/*
@@ -3246,8 +3246,9 @@ static struct notifier_block fbcon_event
.notifier_call = fbcon_event_notify,
};
-static ssize_t store_rotate(struct class_device *class_device,
- const char *buf, size_t count)
+static ssize_t store_rotate(struct device *device,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
{
struct fb_info *info;
int rotate, idx;
@@ -3270,8 +3271,9 @@ err:
return count;
}
-static ssize_t store_rotate_all(struct class_device *class_device,
- const char *buf, size_t count)
+static ssize_t store_rotate_all(struct device *device,
+ struct device_attribute *attr,const char *buf,
+ size_t count)
{
struct fb_info *info;
int rotate, idx;
@@ -3294,7 +3296,8 @@ err:
return count;
}
-static ssize_t show_rotate(struct class_device *class_device, char *buf)
+static ssize_t show_rotate(struct device *device,
+ struct device_attribute *attr,char *buf)
{
struct fb_info *info;
int rotate = 0, idx;
@@ -3315,7 +3318,8 @@ err:
return snprintf(buf, PAGE_SIZE, "%d\n", rotate);
}
-static ssize_t show_cursor_blink(struct class_device *class_device, char *buf)
+static ssize_t show_cursor_blink(struct device *device,
+ struct device_attribute *attr, char *buf)
{
struct fb_info *info;
struct fbcon_ops *ops;
@@ -3342,7 +3346,8 @@ err:
return snprintf(buf, PAGE_SIZE, "%d\n", blink);
}
-static ssize_t store_cursor_blink(struct class_device *clas_device,
+static ssize_t store_cursor_blink(struct device *device,
+ struct device_attribute *attr,
const char *buf, size_t count)
{
struct fb_info *info;
@@ -3378,22 +3383,21 @@ err:
return count;
}
-static struct class_device_attribute class_device_attrs[] = {
+static struct device_attribute device_attrs[] = {
__ATTR(rotate, S_IRUGO|S_IWUSR, show_rotate, store_rotate),
__ATTR(rotate_all, S_IWUSR, NULL, store_rotate_all),
__ATTR(cursor_blink, S_IRUGO|S_IWUSR, show_cursor_blink,
store_cursor_blink),
};
-static int fbcon_init_class_device(void)
+static int fbcon_init_device(void)
{
int i, error = 0;
fbcon_has_sysfs = 1;
- for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) {
- error = class_device_create_file(fbcon_class_device,
- &class_device_attrs[i]);
+ for (i = 0; i < ARRAY_SIZE(device_attrs); i++) {
+ error = device_create_file(fbcon_device, &device_attrs[i]);
if (error)
break;
@@ -3401,8 +3405,7 @@ static int fbcon_init_class_device(void)
if (error) {
while (--i >= 0)
- class_device_remove_file(fbcon_class_device,
- &class_device_attrs[i]);
+ device_remove_file(fbcon_device, &device_attrs[i]);
fbcon_has_sysfs = 0;
}
@@ -3488,16 +3491,15 @@ static int __init fb_console_init(void)
acquire_console_sem();
fb_register_client(&fbcon_event_notifier);
- fbcon_class_device =
- class_device_create(fb_class, NULL, MKDEV(0, 0), NULL, "fbcon");
+ fbcon_device = device_create(fb_class, NULL, MKDEV(0, 0), "fbcon");
- if (IS_ERR(fbcon_class_device)) {
- printk(KERN_WARNING "Unable to create class_device "
+ if (IS_ERR(fbcon_device)) {
+ printk(KERN_WARNING "Unable to create device "
"for fbcon; errno = %ld\n",
- PTR_ERR(fbcon_class_device));
- fbcon_class_device = NULL;
+ PTR_ERR(fbcon_device));
+ fbcon_device = NULL;
} else
- fbcon_init_class_device();
+ fbcon_init_device();
for (i = 0; i < MAX_NR_CONSOLES; i++)
con2fb_map[i] = -1;
@@ -3511,14 +3513,13 @@ module_init(fb_console_init);
#ifdef MODULE
-static void __exit fbcon_deinit_class_device(void)
+static void __exit fbcon_deinit_device(void)
{
int i;
if (fbcon_has_sysfs) {
- for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++)
- class_device_remove_file(fbcon_class_device,
- &class_device_attrs[i]);
+ for (i = 0; i < ARRAY_SIZE(device_attrs); i++)
+ device_remove_file(fbcon_device, &device_attrs[i]);
fbcon_has_sysfs = 0;
}
@@ -3528,8 +3529,8 @@ static void __exit fb_console_exit(void)
{
acquire_console_sem();
fb_unregister_client(&fbcon_event_notifier);
- fbcon_deinit_class_device();
- class_device_destroy(fb_class, MKDEV(0, 0));
+ fbcon_deinit_device();
+ device_destroy(fb_class, MKDEV(0, 0));
fbcon_exit();
release_console_sem();
unregister_con_driver(&fb_con);
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
reply other threads:[~2007-05-27 9:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4658D5F0.5050300@gmail.com \
--to=adaplas@gmail.com \
--cc=akpm@osdl.org \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.