From: "alpha @ steudten Engineering" <NWQ3MzhlY2QwZDAzODVhN@steudten.com>
To: LKML <linux-kernel@vger.kernel.org>
Subject: Kernel 2.6.20: possible circular locking dependency detected
Date: Wed, 30 May 2007 14:34:31 +0200 [thread overview]
Message-ID: <465D6F57.5040709@steudten.com> (raw)
Linux version 2.6.20-1.2948.self (rpmbuild@merlin.linux.alpha) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP
Mon May 7 11:07:53 CEST 2007
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.20-1.2948.self #1
-------------------------------------------------------
squid/4111 is trying to acquire lock:
(tty_mutex){--..}, at: [<c019fb54>] print_warning+0x8b/0x12e
but task is already holding lock:
(&s->s_dquot.dqptr_sem){----}, at: [<c01a0802>] dquot_alloc_inode+0x34/0x10a
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&s->s_dquot.dqptr_sem){----}:
[<c013a89d>] __lock_acquire+0x950/0xa70
[<c01a06bb>] dquot_alloc_space+0x42/0x155
[<c013acf8>] lock_acquire+0x67/0x89
[<c01a06bb>] dquot_alloc_space+0x42/0x155
[<c013683a>] down_read+0x38/0x49
[<c01a06bb>] dquot_alloc_space+0x42/0x155
[<c01a06bb>] dquot_alloc_space+0x42/0x155
[<c01ae738>] ext3_new_blocks+0x83/0x5c4
[<c019dd86>] mb_cache_entry_find_first+0x29/0x5b
[<c01aec99>] ext3_new_block+0x20/0x25
[<c01bcec2>] ext3_xattr_block_set+0x57b/0x7ce
[<c01b0e41>] __ext3_get_inode_loc+0x10f/0x2fb
[<c01bf52b>] journal_get_write_access+0x21/0x26
[<c01bd494>] ext3_xattr_set_handle+0x37f/0x47f
[<c01be8ac>] ext3_init_security+0x70/0x91
[<c01b0423>] ext3_new_inode+0x877/0x98b
[<c01bf8c5>] start_this_handle+0x256/0x341
[<c034a84b>] _spin_unlock+0x14/0x1c
[<c01bf994>] start_this_handle+0x325/0x341
[<c016ff4c>] cache_alloc_debugcheck_after+0xc4/0x136
[<c0139b22>] trace_hardirqs_on+0x141/0x164
[<c01bf042>] journal_stop+0x1ce/0x1da
[<c01bfa5f>] journal_start+0xaf/0xdd
[<c019ef57>] dquot_initialize+0x21/0x87
[<c01b62cd>] ext3_create+0x7b/0xe2
[<c017b5f3>] vfs_create+0xca/0x134
[<c017de64>] open_namei+0x177/0x5a2
[<c01734f6>] get_unused_fd+0x22/0xbd
[<c016303c>] __handle_mm_fault+0x8c0/0x8e2
[<c01737b9>] do_filp_open+0x25/0x39
[<c034a84b>] _spin_unlock+0x14/0x1c
[<c0173587>] get_unused_fd+0xb3/0xbd
[<c017380f>] do_sys_open+0x42/0xbe
[<c01738c4>] sys_open+0x1c/0x1e
[<c0102ff4>] syscall_call+0x7/0xb
[<ffffffff>] 0xffffffff
-> #3 (&ei->xattr_sem){----}:
[<c013a89d>] __lock_acquire+0x950/0xa70
[<c01bd804>] ext3_xattr_get+0x2e/0x239
[<c013acf8>] lock_acquire+0x67/0x89
[<c01bd804>] ext3_xattr_get+0x2e/0x239
[<c013683a>] down_read+0x38/0x49
[<c01bd804>] ext3_xattr_get+0x2e/0x239
[<c01bd804>] ext3_xattr_get+0x2e/0x239
[<c0139909>] mark_held_locks+0x46/0x62
[<c0349533>] __mutex_lock_slowpath+0x292/0x2af
[<c016ff4c>] cache_alloc_debugcheck_after+0xc4/0x136
[<c01be90e>] ext3_xattr_security_get+0x41/0x4b
[<c018b185>] generic_getxattr+0x41/0x47
[<c01df2c5>] inode_doinit_with_dentry+0x16e/0x4ba
[<c01be90e>] ext3_xattr_security_get+0x41/0x4b
[<c018b144>] generic_getxattr+0x0/0x47
[<c01dfe9a>] superblock_doinit+0x6c3/0x751
[<c01e02f3>] selinux_complete_init+0x64/0xb6
[<c013683a>] down_read+0x38/0x49
[<c01e0302>] selinux_complete_init+0x73/0xb6
[<c01eaea1>] security_load_policy+0xed/0x275
[<c034ad4a>] _spin_unlock_irqrestore+0x3e/0x4d
[<c0139909>] mark_held_locks+0x46/0x62
[<c034ad4a>] _spin_unlock_irqrestore+0x3e/0x4d
[<c034ad4a>] _spin_unlock_irqrestore+0x3e/0x4d
[<c0139b22>] trace_hardirqs_on+0x141/0x164
[<c0152452>] delayacct_end+0x55/0x77
[<c015246d>] delayacct_end+0x70/0x77
[<c0157372>] sync_page+0x0/0x3b
[<c0152565>] __delayacct_blkio_end+0x5b/0x5e
[<c01629df>] __handle_mm_fault+0x263/0x8e2
[<c0157364>] __lock_page+0x58/0x5e
[<c01629df>] __handle_mm_fault+0x263/0x8e2
[<c011b784>] kunmap_atomic+0x54/0x61
[<c016303c>] __handle_mm_fault+0x8c0/0x8e2
[<c034c403>] do_page_fault+0x16b/0x4f2
[<c01368ac>] up_read+0x14/0x28
[<c034c529>] do_page_fault+0x291/0x4f2
[<c0103045>] restore_nocheck+0x12/0x15
[<c0103045>] restore_nocheck+0x12/0x15
[<c0204b16>] __copy_from_user_ll+0xcb/0xd6
[<c01e3c9d>] sel_write_load+0xa6/0x2dd
[<c01e3bf7>] sel_write_load+0x0/0x2dd
[<c017510e>] vfs_write+0xa8/0x154
[<c0175729>] sys_write+0x41/0x67
[<c0102ff4>] syscall_call+0x7/0xb
[<ffffffff>] 0xffffffff
-> #2 (&isec->lock){--..}:
[<c013a89d>] __lock_acquire+0x950/0xa70
[<c01df18c>] inode_doinit_with_dentry+0x35/0x4ba
[<c0139ca8>] check_usage+0x24/0x245
[<c013acf8>] lock_acquire+0x67/0x89
[<c01df18c>] inode_doinit_with_dentry+0x35/0x4ba
[<c03493a7>] __mutex_lock_slowpath+0x106/0x2af
[<c01df18c>] inode_doinit_with_dentry+0x35/0x4ba
[<c011c219>] __might_sleep+0x21/0xf0
[<c01df18c>] inode_doinit_with_dentry+0x35/0x4ba
[<c013ac87>] lock_release+0x16b/0x175
[<c01838ac>] d_instantiate+0x7e/0x82
[<c01ab0a1>] sysfs_create+0x85/0xb6
[<c01aba74>] init_dir+0x0/0x1a
[<c01abe50>] create_dir+0x9e/0x19a
[<c01ac614>] sysfs_create_dir+0x45/0x5f
[<c020120c>] kobject_add+0xdd/0x194
[<c02013b8>] subsystem_register+0xf/0x1c
[<c049204d>] mnt_init+0xe8/0x1c6
[<c0491d3e>] vfs_caches_init+0x135/0x144
[<c0493c43>] security_init+0x2d/0x3d
[<c0480695>] start_kernel+0x2cb/0x427
[<c04801c8>] unknown_bootoption+0x0/0x202
[<ffffffff>] 0xffffffff
-> #1 (&sysfs_inode_imutex_key){--..}:
[<c013a89d>] __lock_acquire+0x950/0xa70
[<c01aae4a>] sysfs_hash_and_remove+0x34/0x116
[<c017cdcf>] __link_path_walk+0xad6/0xc13
[<c0139b22>] trace_hardirqs_on+0x141/0x164
[<c013acf8>] lock_acquire+0x67/0x89
[<c01aae4a>] sysfs_hash_and_remove+0x34/0x116
[<c03493a7>] __mutex_lock_slowpath+0x106/0x2af
[<c01aae4a>] sysfs_hash_and_remove+0x34/0x116
[<c01aae4a>] sysfs_hash_and_remove+0x34/0x116
[<c0279d13>] device_remove_file+0x1c/0x28
[<c0279d7f>] device_del+0x29/0x1b8
[<c0279f16>] device_unregister+0x8/0x10
[<c02606b9>] vcs_remove_sysfs+0x17/0x31
[<c0265257>] con_close+0x49/0x5b
[<c0259ecf>] release_dev+0x210/0x61e
[<c025bed2>] tty_open+0x233/0x2ba
[<c0176fec>] chrdev_open+0x10b/0x138
[<c0176ee1>] chrdev_open+0x0/0x138
[<c0173454>] fd_install+0x21/0x49
[<c0173785>] nameidata_to_filp+0x24/0x33
[<c01743c0>] sys_close+0x21/0xa7
[<c025a2ec>] tty_release+0xf/0x18
[<c0175a78>] __fput+0xb5/0x16b
[<c01734cd>] filp_close+0x51/0x58
[<c017440f>] sys_close+0x70/0xa7
[<c0102ff4>] syscall_call+0x7/0xb
[<ffffffff>] 0xffffffff
-> #0 (tty_mutex){--..}:
[<c013a7a7>] __lock_acquire+0x85a/0xa70
[<c019fb54>] print_warning+0x8b/0x12e
[<c0349288>] __mutex_unlock_slowpath+0x13c/0x150
[<c0139909>] mark_held_locks+0x46/0x62
[<c0349288>] __mutex_unlock_slowpath+0x13c/0x150
[<c013acf8>] lock_acquire+0x67/0x89
[<c019fb54>] print_warning+0x8b/0x12e
[<c03493a7>] __mutex_lock_slowpath+0x106/0x2af
[<c019fb54>] print_warning+0x8b/0x12e
[<c019fb54>] print_warning+0x8b/0x12e
[<c01a08ba>] dquot_alloc_inode+0xec/0x10a
[<c01b0403>] ext3_new_inode+0x857/0x98b
[<c01bf8c5>] start_this_handle+0x256/0x341
[<c034a84b>] _spin_unlock+0x14/0x1c
[<c01bf994>] start_this_handle+0x325/0x341
[<c016ff4c>] cache_alloc_debugcheck_after+0xc4/0x136
[<c0139b22>] trace_hardirqs_on+0x141/0x164
[<c01bf042>] journal_stop+0x1ce/0x1da
[<c01bfa5f>] journal_start+0xaf/0xdd
[<c01b62cd>] ext3_create+0x7b/0xe2
[<c017b5f3>] vfs_create+0xca/0x134
[<c017de64>] open_namei+0x177/0x5a2
[<c01734f6>] get_unused_fd+0x22/0xbd
[<c014ef76>] __audit_getname+0x84/0xdd
[<c01737b9>] do_filp_open+0x25/0x39
[<c034a84b>] _spin_unlock+0x14/0x1c
[<c0173587>] get_unused_fd+0xb3/0xbd
[<c034a80a>] _read_unlock+0x14/0x1c
[<c017380f>] do_sys_open+0x42/0xbe
[<c01738c4>] sys_open+0x1c/0x1e
[<c0102ff4>] syscall_call+0x7/0xb
[<ffffffff>] 0xffffffff
other info that might help us debug this:
2 locks held by squid/4111:
#0: (&inode->i_mutex){--..}, at: [<c017ddcf>] open_namei+0xe2/0x5a2
#1: (&s->s_dquot.dqptr_sem){----}, at: [<c01a0802>] dquot_alloc_inode+0x34/0x10a
stack backtrace:
[<c0139027>] print_circular_bug_tail+0x5f/0x67
[<c013a7a7>] __lock_acquire+0x85a/0xa70
[<c019fb54>] print_warning+0x8b/0x12e
[<c0349288>] __mutex_unlock_slowpath+0x13c/0x150
[<c0139909>] mark_held_locks+0x46/0x62
[<c0349288>] __mutex_unlock_slowpath+0x13c/0x150
[<c013acf8>] lock_acquire+0x67/0x89
[<c019fb54>] print_warning+0x8b/0x12e
[<c03493a7>] __mutex_lock_slowpath+0x106/0x2af
[<c019fb54>] print_warning+0x8b/0x12e
[<c019fb54>] print_warning+0x8b/0x12e
[<c01a08ba>] dquot_alloc_inode+0xec/0x10a
[<c01b0403>] ext3_new_inode+0x857/0x98b
[<c01bf8c5>] start_this_handle+0x256/0x341
[<c034a84b>] _spin_unlock+0x14/0x1c
[<c01bf994>] start_this_handle+0x325/0x341
[<c016ff4c>] cache_alloc_debugcheck_after+0xc4/0x136
[<c0139b22>] trace_hardirqs_on+0x141/0x164
[<c01bf042>] journal_stop+0x1ce/0x1da
[<c01bfa5f>] journal_start+0xaf/0xdd
[<c01b62cd>] ext3_create+0x7b/0xe2
[<c017b5f3>] vfs_create+0xca/0x134
[<c017de64>] open_namei+0x177/0x5a2
[<c01734f6>] get_unused_fd+0x22/0xbd
[<c014ef76>] __audit_getname+0x84/0xdd
[<c01737b9>] do_filp_open+0x25/0x39
[<c034a84b>] _spin_unlock+0x14/0x1c
[<c0173587>] get_unused_fd+0xb3/0xbd
[<c034a80a>] _read_unlock+0x14/0x1c
[<c017380f>] do_sys_open+0x42/0xbe
[<c01738c4>] sys_open+0x1c/0x1e
[<c0102ff4>] syscall_call+0x7/0xb
=======================
next reply other threads:[~2007-05-30 12:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-30 12:34 alpha @ steudten Engineering [this message]
2007-06-07 11:13 ` Kernel 2.6.20: possible circular locking dependency detected Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=465D6F57.5040709@steudten.com \
--to=nwq3mzhly2qwzdazodvhn@steudten.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.