All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Weil <weil@mail.berlios.de>
To: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel][PATCH]Minor spelling fixes
Date: Sat, 02 Jun 2007 12:10:14 +0200	[thread overview]
Message-ID: <46614206.4080107@mail.berlios.de> (raw)
In-Reply-To: <44670F1D.8090303@mail.berlios.de>

[-- Attachment #1: Type: text/plain, Size: 226 bytes --]

Here are some more spelling fixes and one fix for code formatting.
Please add them to CVS.

Stefan

Stefan Weil schrieb:
> Here is a collection of some minor patches.
> They only fix spelling in comments.
>
> Regards
> Stefan

[-- Attachment #2: spelling.patch --]
[-- Type: text/x-diff, Size: 8248 bytes --]

Index: disas.c
===================================================================
RCS file: /sources/qemu/qemu/disas.c,v
retrieving revision 1.37
diff -u -b -B -r1.37 disas.c
--- disas.c	9 Apr 2007 15:14:57 -0000	1.37
+++ disas.c	2 Jun 2007 09:32:01 -0000
@@ -134,7 +134,7 @@
 }
 #endif
 
-/* Disassemble this for me please... (debugging). 'flags' has teh following
+/* Disassemble this for me please... (debugging). 'flags' has the following
    values:
     i386 - nonzero means 16 bit code
     arm  - nonzero means thumb code 
Index: exec.c
===================================================================
RCS file: /sources/qemu/qemu/exec.c,v
retrieving revision 1.98
diff -u -b -B -r1.98 exec.c
--- exec.c	30 May 2007 17:25:06 -0000	1.98
+++ exec.c	2 Jun 2007 09:32:04 -0000
@@ -1220,7 +1221,7 @@
     { CPU_LOG_EXEC, "exec",
       "show trace before each executed TB (lots of logs)" },
     { CPU_LOG_TB_CPU, "cpu",
-      "show CPU state before bloc translation" },
+      "show CPU state before block translation" },
 #ifdef TARGET_I386
     { CPU_LOG_PCALL, "pcall",
       "show protected mode far calls/returns/exceptions" },
Index: sdl.c
===================================================================
RCS file: /sources/qemu/qemu/sdl.c,v
retrieving revision 1.38
diff -u -b -B -r1.38 sdl.c
--- sdl.c	1 May 2007 01:34:14 -0000	1.38
+++ sdl.c	2 Jun 2007 09:32:06 -0000
@@ -407,7 +407,8 @@
                         case SDLK_END: keysym = QEMU_KEY_END; break;
                         case SDLK_PAGEUP: keysym = QEMU_KEY_PAGEUP; break;
                         case SDLK_PAGEDOWN: keysym = QEMU_KEY_PAGEDOWN; break;
-                        case SDLK_BACKSPACE: keysym = QEMU_KEY_BACKSPACE; break;                        case SDLK_DELETE: keysym = QEMU_KEY_DELETE; break;
+                        case SDLK_BACKSPACE: keysym = QEMU_KEY_BACKSPACE; break;
+                        case SDLK_DELETE: keysym = QEMU_KEY_DELETE; break;
                         default: break;
                         }
                     }
Index: darwin-user/mmap.c
===================================================================
RCS file: /sources/qemu/qemu/darwin-user/mmap.c,v
retrieving revision 1.1
diff -u -b -B -r1.1 mmap.c
--- darwin-user/mmap.c	18 Jan 2007 20:06:33 -0000	1.1
+++ darwin-user/mmap.c	2 Jun 2007 09:32:09 -0000
@@ -199,7 +199,7 @@
 
     if (!(flags & MAP_FIXED)) {
 #if defined(__alpha__) || defined(__sparc__) || defined(__x86_64__)
-        /* tell the kenel to search at the same place as i386 */
+        /* tell the kernel to search at the same place as i386 */
         if (host_start == 0) {
             host_start = last_start;
             last_start += HOST_PAGE_ALIGN(len);
Index: hw/cirrus_vga.c
===================================================================
RCS file: /sources/qemu/qemu/hw/cirrus_vga.c,v
retrieving revision 1.24
diff -u -b -B -r1.24 cirrus_vga.c
--- hw/cirrus_vga.c	2 Apr 2007 01:10:46 -0000	1.24
+++ hw/cirrus_vga.c	2 Jun 2007 09:32:10 -0000
@@ -2784,7 +2786,7 @@
 	case 0x09:
 	case 0x0c:
 	case 0x0d:
-	case 0x12:		/* veritcal display end */
+	case 0x12:		/* vertical display end */
 	    s->cr[s->cr_index] = val;
 	    break;
 
Index: hw/cuda.c
===================================================================
RCS file: /sources/qemu/qemu/hw/cuda.c,v
retrieving revision 1.12
diff -u -b -B -r1.12 cuda.c
--- hw/cuda.c	7 Apr 2007 18:14:41 -0000	1.12
+++ hw/cuda.c	2 Jun 2007 09:32:10 -0000
@@ -445,9 +445,9 @@
             cuda_update_irq(s);
         } else {
             if (!(s->last_b & TIP)) {
-                /* handle end of host to cuda transfert */
+                /* handle end of host to cuda transfer */
                 packet_received = (s->data_out_index > 0);
-                /* always an IRQ at the end of transfert */
+                /* always an IRQ at the end of transfer */
                 s->ifr |= SR_INT;
                 cuda_update_irq(s);
             }
Index: hw/ne2000.c
===================================================================
RCS file: /sources/qemu/qemu/hw/ne2000.c,v
retrieving revision 1.25
diff -u -b -B -r1.25 ne2000.c
--- hw/ne2000.c	7 Apr 2007 18:14:41 -0000	1.25
+++ hw/ne2000.c	2 Jun 2007 09:32:14 -0000
@@ -325,7 +325,7 @@
         s->cmd = val;
         if (!(val & E8390_STOP)) { /* START bit makes no sense on RTL8029... */
             s->isr &= ~ENISR_RESET;
-            /* test specific case: zero length transfert */
+            /* test specific case: zero length transfer */
             if ((val & (E8390_RREAD | E8390_RWRITE)) &&
                 s->rcnt == 0) {
                 s->isr |= ENISR_RDC;
@@ -340,7 +340,7 @@
                 if (index + s->tcnt <= NE2000_PMEM_END) {
                     qemu_send_packet(s->vc, s->mem + index, s->tcnt);
                 }
-                /* signal end of transfert */
+                /* signal end of transfer */
                 s->tsr = ENTSR_PTX;
                 s->isr |= ENISR_TX;
                 s->cmd &= ~E8390_TRANS; 
@@ -550,7 +550,7 @@
 
     if (s->rcnt <= len) {
         s->rcnt = 0;
-        /* signal end of transfert */
+        /* signal end of transfer */
         s->isr |= ENISR_RDC;
         ne2000_update_irq(s);
     } else {
Index: hw/scsi-disk.c
===================================================================
RCS file: /sources/qemu/qemu/hw/scsi-disk.c,v
retrieving revision 1.14
diff -u -b -B -r1.14 scsi-disk.c
--- hw/scsi-disk.c	28 Apr 2007 20:47:59 -0000	1.14
+++ hw/scsi-disk.c	2 Jun 2007 09:32:15 -0000
@@ -489,7 +489,7 @@
         is_write = 1;
         break;
     case 0x35:
-        DPRINTF("Syncronise cache (sector %d, count %d)\n", lba, len);
+        DPRINTF("Synchronise cache (sector %d, count %d)\n", lba, len);
         bdrv_flush(s->bdrv);
         break;
     case 0x43:
Index: hw/vga.c
===================================================================
RCS file: /sources/qemu/qemu/hw/vga.c,v
retrieving revision 1.51
diff -u -b -B -r1.51 vga.c
--- hw/vga.c	13 May 2007 13:26:49 -0000	1.51
+++ hw/vga.c	2 Jun 2007 09:32:16 -0000
@@ -346,7 +351,7 @@
         case 0x09:
         case 0x0c:
         case 0x0d:
-        case 0x12: /* veritcal display end */
+        case 0x12: /* vertical display end */
             s->cr[s->cr_index] = val;
             break;
         default:
Index: linux-user/elfload.c
===================================================================
RCS file: /sources/qemu/qemu/linux-user/elfload.c,v
retrieving revision 1.41
diff -u -b -B -r1.41 elfload.c
--- linux-user/elfload.c	13 May 2007 13:58:00 -0000	1.41
+++ linux-user/elfload.c	2 Jun 2007 09:32:17 -0000
@@ -799,7 +799,7 @@
 #endif
 
         if (interp_elf_ex->e_type == ET_DYN) {
-            /* in order to avoid harcoding the interpreter load
+            /* in order to avoid hardcoding the interpreter load
                address in qemu, we allocate a big enough memory zone */
             error = target_mmap(0, INTERP_MAP_SIZE,
                                 PROT_NONE, MAP_PRIVATE | MAP_ANON, 
@@ -1191,7 +1191,7 @@
                base, as well as whatever program they might try to exec.  This
                is because the brk will follow the loader, and is not movable.  */
             /* NOTE: for qemu, we do a big mmap to get enough space
-               without harcoding any address */
+               without hardcoding any address */
             error = target_mmap(0, ET_DYN_MAP_SIZE,
                                 PROT_NONE, MAP_PRIVATE | MAP_ANON, 
                                 -1, 0);
Index: target-i386/translate.c
===================================================================
RCS file: /sources/qemu/qemu/target-i386/translate.c,v
retrieving revision 1.64
diff -u -b -B -r1.64 translate.c
--- target-i386/translate.c	27 May 2007 19:39:27 -0000	1.64
+++ target-i386/translate.c	2 Jun 2007 09:32:21 -0000
@@ -6431,7 +6432,7 @@
 
     opc_ptr = opc_buf + opc_buf_len;
     /* live_flags contains the flags needed by the next instructions
-       in the code. At the end of the bloc, we consider that all the
+       in the code. At the end of the block, we consider that all the
        flags are live. */
     live_flags = CC_OSZAPC;
     while (opc_ptr > opc_buf) {

      reply	other threads:[~2007-06-02 10:10 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-05-14 11:06 [Qemu-devel][PATCH]Minor spelling fixes Stefan Weil
2007-06-02 10:10 ` Stefan Weil [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=46614206.4080107@mail.berlios.de \
    --to=weil@mail.berlios.de \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.