From: LCID Fire <lcid-fire@gmx.net>
To: alsa-devel@alsa-project.org
Subject: Re: Quirks device not showing up
Date: Fri, 08 Jun 2007 16:17:27 +0200 [thread overview]
Message-ID: <466964F7.6040809@gmx.net> (raw)
In-Reply-To: <1181284042.2424.1194097060@webmail.messagingengine.com>
Clemens Ladisch wrote:
> I'd tell you what the actual problem with your quirk is, but my crystal
> ball is under repair just now. Please show your code and the output of
> "lsusb -v" for your device.
It's the following:
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 32
idVendor 0x13e5
idProduct 0x0001
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 497
bNumInterfaces 9
bConfigurationValue 1
iConfiguration 13
bmAttributes 0x80
(Bus Powered)
MaxPower 300mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 0
iInterface 15
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 0
iInterface 7
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 0
iInterface 9
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x00b8 1x 184 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 0
iInterface 3
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 0
iInterface 5
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x00b8 1x 184 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 0
iInterface 16
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 0
iInterface 8
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 0
iInterface 10
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x00b8 1x 184 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 0
iInterface 4
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 0
iInterface 6
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x00b8 1x 184 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 6
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 0
iInterface 17
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 7
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 0
iInterface 11
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 7
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 0
iInterface 12
Class specific interface descriptor for class 255 is unsupported
Class specific interface descriptor for class 255 is unsupported
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x0090 1x 144 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 8
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 4
cannot read device status, Operation not permitted (1)
Seems pretty default to me. As I said the probing and analyses of the
channel seems to work fine.
next prev parent reply other threads:[~2007-06-08 14:19 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-20 15:47 Questions on usb audio development LCID Fire
2007-05-20 19:25 ` Lee Revell
2007-05-21 15:47 ` Takashi Iwai
2007-05-21 20:51 ` LCID Fire
2007-06-07 20:58 ` Quirks device not showing up LCID Fire
2007-06-08 6:27 ` Clemens Ladisch
2007-06-08 14:17 ` LCID Fire [this message]
2007-06-08 21:17 ` Lee Revell
2007-06-09 8:32 ` LCID Fire
2007-06-11 21:25 ` LCID Fire
2007-06-11 22:35 ` Lee Revell
2007-06-11 22:38 ` LCID Fire
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=466964F7.6040809@gmx.net \
--to=lcid-fire@gmx.net \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.