Re: [linux-usb-devel] ThinkPad T41 - Strange USB 2.0 behaviour

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Robert de Rooy <robert.de.rooy@gmail.com>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: Jiri Kosina <jikos@jikos.cz>, Greg KH <greg@kroah.com>,
	Joel.Becker@oracle.com,
	USB development list <linux-usb-devel@lists.sourceforge.net>,
	Kernel development list <linux-kernel@vger.kernel.org>
Subject: Re: [linux-usb-devel] ThinkPad T41 - Strange USB 2.0 behaviour
Date: Sun, 10 Jun 2007 01:43:28 +0200	[thread overview]
Message-ID: <466B3B20.5040003@gmail.com> (raw)
In-Reply-To: <Pine.LNX.4.44L0.0706091716590.30086-100000@netrider.rowland.org>

Alan Stern wrote:
> Unfortunately you posted the system log file instead of the dmesg log, 
> and your syslogd was configured not to retain debug-level messages.
>   
Ok, I did not realize my syslog was filtering the debug-level messages, 
here is the output from dmesg

***USB related boot messages
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, 
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22-rc4 uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
PM: Adding info for usb:usb1
usb usb1: uevent
usb usb1: usb_probe_device
PM: Adding info for No Bus:usbdev1.1_ep00
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
PM: Adding info for usb:1-0:1.0
usb 1-0:1.0: uevent
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 2ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
PM: Adding info for No Bus:usbdev1.1_ep81
drivers/usb/core/inode.c: creating file '001'
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, 
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb2: default language 0x0409
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22-rc4 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
PM: Adding info for usb:usb2
usb usb2: uevent
usb usb2: usb_probe_device
PM: Adding info for No Bus:usbdev2.1_ep00
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
PM: Adding info for usb:2-0:1.0
usb 2-0:1.0: uevent
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
PM: Adding info for No Bus:usbdev2.1_ep81
drivers/usb/core/inode.c: creating file '001'
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, 
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb3: default language 0x0409
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22-rc4 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
PM: Adding info for usb:usb3
usb usb3: uevent
usb usb3: usb_probe_device
PM: Adding info for No Bus:usbdev3.1_ep00
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
PM: Adding info for usb:3-0:1.0
usb 3-0:1.0: uevent
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
PM: Adding info for No Bus:usbdev3.1_ep81
drivers/usb/core/inode.c: creating file '001'
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 64 td 64
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, 
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
drivers/usb/core/inode.c: creating file '004'
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 
ordered !ppc ports=6
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 
bit addr
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 
period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 
period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: default language 0x0409
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22-rc4 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
PM: Adding info for usb:usb4
usb usb4: uevent
usb usb4: usb_probe_device
PM: Adding info for No Bus:usbdev4.1_ep00
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
PM: Adding info for usb:4-0:1.0
usb 4-0:1.0: uevent
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: Single TT
hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 4-0:1.0: power on to power good time: 20ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub

usb usb1: suspend_rh (auto-stop)
usb usb2: suspend_rh (auto-stop)
usb usb3: suspend_rh (auto-stop)
Clocksource tsc unstable (delta = -65524005 ns)
hub 1-0:1.0: hub_suspend
usb usb1: suspend_rh
usb usb1: usb auto-suspend
hub 2-0:1.0: hub_suspend
usb usb2: suspend_rh
usb usb2: usb auto-suspend
hub 3-0:1.0: hub_suspend
usb usb3: suspend_rh
usb usb3: usb auto-suspend
hub 4-0:1.0: hub_suspend
ehci_hcd 0000:00:1d.7: suspend root hub
usb usb4: usb auto-suspend

usb usb1: uevent
usb 1-0:1.0: uevent
usb 1-0:1.0: uevent
usb usb2: uevent
usb 2-0:1.0: uevent
usb 2-0:1.0: uevent
usb usb3: uevent
usb 3-0:1.0: uevent
usb 3-0:1.0: uevent
usb usb4: uevent
usb 4-0:1.0: uevent
usb 4-0:1.0: uevent

usb usb4: usb auto-resume
usb usb4: finish resume
hub 4-0:1.0: hub_resume
ehci_hcd 0000:00:1d.7: resume root hub
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000
usb usb3: usb auto-resume
usb usb3: finish resume
hub 3-0:1.0: hub_resume
usb usb3: wakeup_rh
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb2: usb auto-resume
usb usb2: finish resume
hub 2-0:1.0: hub_resume
usb usb2: wakeup_rh
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb1: usb auto-resume
usb usb1: finish resume
hub 1-0:1.0: hub_resume
usb usb1: wakeup_rh
hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
usb usb3: suspend_rh (auto-stop)
usb usb2: suspend_rh (auto-stop)
usb usb1: suspend_rh (auto-stop)
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
hub 4-0:1.0: hub_suspend
ehci_hcd 0000:00:1d.7: suspend root hub
usb usb4: usb auto-suspend
hub 3-0:1.0: hub_suspend
usb usb3: suspend_rh
usb usb3: usb auto-suspend
hub 2-0:1.0: hub_suspend
usb usb2: suspend_rh
usb usb2: usb auto-suspend
hub 1-0:1.0: hub_suspend
usb usb1: suspend_rh
usb usb1: usb auto-suspend

*** plugging device (leaving it in slightly to long, hence the long 
log); removing the device; rmmod ehci-hcd; plug back in
usb usb4: usb resume
usb usb4: finish resume
hub 4-0:1.0: hub_resume
ehci_hcd 0000:00:1d.7: resume root hub
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE 
CONNECT
usb 4-4: new high speed USB device using ehci_hcd and address 2
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE 
CONNECT
usb 4-4: new high speed USB device using ehci_hcd and address 15
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE 
CONNECT
usb 4-4: new high speed USB device using ehci_hcd and address 20
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE 
CONNECT
usb 4-4: new high speed USB device using ehci_hcd and address 38
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE 
CONNECT
usb 4-4: new high speed USB device using ehci_hcd and address 43
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001004 POWER sig=se0 PE
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE 
CONNECT
usb 4-4: new high speed USB device using ehci_hcd and address 49
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE 
CONNECT
usb 4-4: new high speed USB device using ehci_hcd and address 53
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE 
CONNECT
usb 4-4: new high speed USB device using ehci_hcd and address 62
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001004 POWER sig=se0 PE
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE 
CONNECT
usb 4-4: new high speed USB device using ehci_hcd and address 95
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE 
CONNECT
usb 4-4: new high speed USB device using ehci_hcd and address 110
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE 
CONNECT
usb 4-4: new high speed USB device using ehci_hcd and address 117
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: devpath 4 ep0in 3strikes
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001007 POWER sig=se0 PE 
CSC CONNECT
hub 4-0:1.0: port_wait_reset: err = -22
hub 4-0:1.0: port 4 not enabled, trying reset again...
ehci_hcd 0000:00:1d.7: port 4 reset error -110
hub 4-0:1.0: hub_port_status failed (err = -32)
hub 4-0:1.0: port_wait_reset: err = -32
hub 4-0:1.0: port 4 not enabled, trying reset again...
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port_wait_reset: err = -22
hub 4-0:1.0: port 4 not enabled, trying reset again...
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC 
CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
hub 4-0:1.0: hub_suspend
ehci_hcd 0000:00:1d.7: suspend root hub
usb usb4: usb auto-suspend
ehci_hcd 0000:00:1d.7: remove, state 4
ehci_hcd 0000:00:1d.7: roothub graceful disconnect
usb usb4: USB disconnect, address 1
usb usb4: unregistering device
usb usb4: usb_disable_device nuking all URBs
usb usb4: unregistering interface 4-0:1.0
PM: Removing info for No Bus:usbdev4.1_ep81
usb_endpoint usbdev4.1_ep81: ep_device_release called for usbdev4.1_ep81
PM: Removing info for usb:4-0:1.0
usb 4-0:1.0: uevent
usb 4-0:1.0: uevent
PM: Removing info for No Bus:usbdev4.1_ep00
usb_endpoint usbdev4.1_ep00: ep_device_release called for usbdev4.1_ep00
PM: Removing info for usb:usb4
usb usb4: uevent
ehci_hcd 0000:00:1d.7: stop
ehci_hcd 0000:00:1d.7: reset command 010002 (park)=0 ithresh=1 
period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: irq normal 0 err 33 reclaim 33 (lost 0)
ehci_hcd 0000:00:1d.7: complete 33 unlink 0
ehci_hcd 0000:00:1d.7: ehci_stop completed status 1000 Halt
ehci_hcd 0000:00:1d.7: USB bus 4 deregistered
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
usb usb2: usb resume
usb usb2: finish resume
hub 2-0:1.0: hub_resume
usb usb2: wakeup_rh
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
uhci_hcd 0000:00:1d.1: port 2 portsc 0093,00
hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: default language 0x0409
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: IBM USB Memory Key
usb 2-2: Manufacturer: IBM
PM: Adding info for usb:2-2
usb 2-2: uevent
usb 2-2: usb_probe_device
PM: Adding info for No Bus:usbdev2.2_ep00
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
PM: Adding info for usb:2-2:1.0
usb 2-2:1.0: uevent
usb 2-2:1.0: uevent
libusual 2-2:1.0: usb_probe_interface
libusual 2-2:1.0: usb_probe_interface - got id
PM: Adding info for No Bus:usbdev2.2_ep01
PM: Adding info for No Bus:usbdev2.2_ep82
drivers/usb/core/inode.c: creating file '002'
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
Initializing USB Mass Storage driver...
usb-storage 2-2:1.0: usb_probe_interface
usb-storage 2-2:1.0: usb_probe_interface - got id
scsi2 : SCSI emulation for USB Mass Storage devices
PM: Adding info for No Bus:host2
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
PM: Adding info for No Bus:target2:0:0
scsi 2:0:0:0: Direct-Access     IBM      Memory Key       1.01 PQ: 0 
ANSI: 0 CCS
PM: Adding info for No Bus:target2:0:1
PM: Removing info for No Bus:target2:0:1
PM: Adding info for No Bus:target2:0:2
PM: Removing info for No Bus:target2:0:2
PM: Adding info for No Bus:target2:0:3
PM: Removing info for No Bus:target2:0:3
PM: Adding info for No Bus:target2:0:4
PM: Removing info for No Bus:target2:0:4
PM: Adding info for No Bus:target2:0:5
PM: Removing info for No Bus:target2:0:5
PM: Adding info for No Bus:target2:0:6
PM: Removing info for No Bus:target2:0:6
PM: Adding info for No Bus:target2:0:7
PM: Removing info for No Bus:target2:0:7
PM: Adding info for scsi:2:0:0:0
sd 2:0:0:0: [sdc] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 256000 512-byte hardware sectors (131 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] 256000 512-byte hardware sectors (131 MB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1

next prev parent reply	other threads:[~2007-06-09 21:43 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-06-07 20:23 ThinkPad T41 - Strange USB 2.0 behaviour Robert de Rooy
2007-06-07 20:50 ` Joel Becker
2007-06-07 21:42   ` Robert de Rooy
2007-06-07 21:58     ` Joel Becker
2007-06-08  9:12     ` Jiri Kosina
2007-06-08 10:09       ` Robert de Rooy
2007-06-08 10:17         ` Jiri Kosina
2007-06-08 14:27           ` [linux-usb-devel] " Alan Stern
2007-06-08 22:19             ` Robert de Rooy
2007-06-09 21:20               ` Alan Stern
2007-06-09 23:43                 ` Robert de Rooy [this message]
2007-06-10 15:43                   ` Alan Stern
2007-06-11 22:42                     ` Robert de Rooy
2007-06-11 21:23                       ` Alan Stern
2007-06-12  5:57                         ` Robert de Rooy
2007-06-12 14:54                           ` Alan Stern

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=466B3B20.5040003@gmail.com \
    --to=robert.de.rooy@gmail.com \
    --cc=Joel.Becker@oracle.com \
    --cc=greg@kroah.com \
    --cc=jikos@jikos.cz \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb-devel@lists.sourceforge.net \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.