All of lore.kernel.org
 help / color / mirror / Atom feed
From: Florian Effenberger <florian@effenberger.org>
To: Tejun Heo <htejun@gmail.com>
Cc: Mikael Pettersson <mikpe@it.uu.se>,
	Tomi.Orava@ncircle.nullnet.fi, jeff@garzik.org,
	linux-ide@vger.kernel.org
Subject: Re: libata interface fatal error
Date: Mon, 18 Jun 2007 12:47:36 +0200	[thread overview]
Message-ID: <467662C8.8040603@effenberger.org> (raw)
In-Reply-To: <467630AA.5050108@gmail.com>

Hi,

> Maybe we need to limit link speed to 1.5Gbps for these drives on
> sata_promise?

in our case, it's a

   Vendor: ATA       Model: WDC WD1600YS-01S  Rev: 20.0
   Type:   Direct-Access                      ANSI SCSI revision: 05
   Vendor: ATA       Model: WDC WD3200YS-01P  Rev: 21.0
   Type:   Direct-Access                      ANSI SCSI revision: 05
   Vendor: ATA       Model: WDC WD3200YS-01P  Rev: 21.0
   Type:   Direct-Access                      ANSI SCSI revision: 05
   Vendor: ATA       Model: WDC WD3200YS-01P  Rev: 21.0
   Type:   Direct-Access                      ANSI SCSI revision: 05
   Vendor: ATA       Model: WDC WD3200YS-01P  Rev: 21.0
   Type:   Direct-Access                      ANSI SCSI revision: 05
   Vendor: ATA       Model: WDC WD3200YS-01P  Rev: 21.0
   Type:   Direct-Access                      ANSI SCSI revision: 05

on a

00:00.0 Host bridge: Intel Corporation P965/G965 Memory Controller Hub 
(rev 02)
00:01.0 PCI bridge: Intel Corporation P965/G965 PCI Express Root Port 
(rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
#4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
#5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI 
#2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio 
Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
#1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
#2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI 
#3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI 
#1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface 
Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HB (ICH8) SATA AHCI 
Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller 
(rev 02)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 
016a (rev a1)
03:00.0 Ethernet controller: Marvell Technology Group Ltd. Unknown 
device 4364 (rev 12)
04:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 
AHCI Controller (rev 02)
04:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 
AHCI Controller (rev 02)
05:01.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 
100] (rev 0c)
05:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 
IEEE-1394a-2000 Controller (PHY/Link)

Maybe blacklisting makes sense here, too?

Florian

  reply	other threads:[~2007-06-18 10:47 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-06-18  7:05 libata interface fatal error Mikael Pettersson
2007-06-18  7:13 ` Tejun Heo
2007-06-18 10:47   ` Florian Effenberger [this message]
2007-06-18 17:14 ` Ansgar Knappheide
2007-06-18 18:54 ` Tomi Orava
  -- strict thread matches above, loose matches on Subject: below --
2007-05-26  9:43 Florian Effenberger
2007-05-29  9:16 ` Tejun Heo
2007-05-29 14:16   ` Florian Effenberger
2007-06-06 21:23   ` Florian Effenberger
2007-06-07  9:50     ` Tejun Heo
2007-06-07 14:08       ` Florian Effenberger
2007-06-13 10:37       ` Florian Effenberger
2007-06-14  9:43         ` Tejun Heo
2007-06-14 11:12           ` Florian Effenberger
2007-06-14 12:25             ` Tejun Heo
2007-06-14 15:12               ` Florian Effenberger
2007-06-18  3:10                 ` Tejun Heo
2007-06-18  6:08                   ` Tomi Orava
2007-06-18  6:28                     ` Tejun Heo
2007-06-18 10:38                   ` Florian Effenberger
2007-06-18 10:44                     ` Tejun Heo
2007-06-16 10:23       ` Florian Effenberger
2007-06-18  3:13         ` Tejun Heo
2007-06-18 10:44           ` Florian Effenberger
2007-06-18 10:56             ` Tejun Heo
2007-06-18 11:28               ` Florian Effenberger
2007-06-18 11:30                 ` Tejun Heo
2007-06-18 11:32                   ` Florian Effenberger
2007-06-24 11:32               ` Florian Effenberger
2007-06-25  2:49                 ` Tejun Heo
2007-06-25  8:47                   ` Florian Effenberger
2007-05-24 13:25 Florian Effenberger
2007-05-24 13:45 ` Tejun Heo
2007-05-24 14:08   ` Florian Effenberger
2007-05-24 14:21     ` Tejun Heo
2007-05-24 14:47       ` Florian Effenberger
2007-05-24 14:53         ` Tejun Heo
2007-05-24 15:28           ` Florian Effenberger
2007-05-24 14:55         ` Greg Freemyer
2007-05-24 14:59           ` Tejun Heo
2007-05-24 15:00           ` Florian Effenberger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=467662C8.8040603@effenberger.org \
    --to=florian@effenberger.org \
    --cc=Tomi.Orava@ncircle.nullnet.fi \
    --cc=htejun@gmail.com \
    --cc=jeff@garzik.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=mikpe@it.uu.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.