From: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
To: Pierre Ossman <drzeus@drzeus.cx>
Cc: Andrew Victor <andrew@sanpeople.com>,
Marc Pignat <marc.pignat@hevs.ch>,
Hamish Guthrie <hamish@prodigi.ch>,
Linux Kernel list <linux-kernel@vger.kernel.org>
Subject: [PATCH] mmc: at91_mci typo
Date: Tue, 19 Jun 2007 18:32:34 +0200 [thread overview]
Message-ID: <46780522.5030109@rfo.atmel.com> (raw)
Typo fix in at91_mci driver : standardized the typo
(at91_mci everywhere)
Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
---
Will not make the driver works better but will satisfy the most
demanding typo specialists.
drivers/mmc/host/at91_mci.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
Index: b/drivers/mmc/host/at91_mci.c
===================================================================
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -131,7 +131,7 @@ struct at91mci_host
/*
* Copy from sg to a dma block - used for transfers
*/
-static inline void at91mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
+static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
{
unsigned int len, i, size;
unsigned *dmabuf = host->buffer;
@@ -180,7 +180,7 @@ static inline void at91mci_sg_to_dma(str
/*
* Prepare a dma read
*/
-static void at91mci_pre_dma_read(struct at91mci_host *host)
+static void at91_mci_pre_dma_read(struct at91mci_host *host)
{
int i;
struct scatterlist *sg;
@@ -248,7 +248,7 @@ static void at91mci_pre_dma_read(struct
/*
* Handle after a dma read
*/
-static void at91mci_post_dma_read(struct at91mci_host *host)
+static void at91_mci_post_dma_read(struct at91mci_host *host)
{
struct mmc_command *cmd;
struct mmc_data *data;
@@ -299,7 +299,7 @@ static void at91mci_post_dma_read(struct
/* Is there another transfer to trigger? */
if (host->transfer_index < data->sg_len)
- at91mci_pre_dma_read(host);
+ at91_mci_pre_dma_read(host);
else {
at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
@@ -464,7 +464,7 @@ static unsigned int at91_mci_send_comman
host->buffer = NULL;
host->total_length = 0;
- at91mci_pre_dma_read(host);
+ at91_mci_pre_dma_read(host);
ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */;
}
else {
@@ -476,7 +476,7 @@ static unsigned int at91_mci_send_comman
host->total_length,
&host->physical_address, GFP_KERNEL);
- at91mci_sg_to_dma(host, data);
+ at91_mci_sg_to_dma(host, data);
pr_debug("Transmitting %d bytes\n", host->total_length);
@@ -506,7 +506,7 @@ static unsigned int at91_mci_send_comman
/*
* Wait for a command to complete
*/
-static void at91mci_process_command(struct at91mci_host *host, struct mmc_command *cmd)
+static void at91_mci_process_command(struct at91mci_host *host, struct mmc_command *cmd)
{
unsigned int ier;
@@ -521,15 +521,15 @@ static void at91mci_process_command(stru
/*
* Process the next step in the request
*/
-static void at91mci_process_next(struct at91mci_host *host)
+static void at91_mci_process_next(struct at91mci_host *host)
{
if (!(host->flags & FL_SENT_COMMAND)) {
host->flags |= FL_SENT_COMMAND;
- at91mci_process_command(host, host->request->cmd);
+ at91_mci_process_command(host, host->request->cmd);
}
else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) {
host->flags |= FL_SENT_STOP;
- at91mci_process_command(host, host->request->stop);
+ at91_mci_process_command(host, host->request->stop);
}
else
mmc_request_done(host->mmc, host->request);
@@ -538,7 +538,7 @@ static void at91mci_process_next(struct
/*
* Handle a command that has been completed
*/
-static void at91mci_completed_command(struct at91mci_host *host)
+static void at91_mci_completed_command(struct at91mci_host *host)
{
struct mmc_command *cmd = host->cmd;
unsigned int status;
@@ -581,7 +581,7 @@ static void at91mci_completed_command(st
else
cmd->error = MMC_ERR_NONE;
- at91mci_process_next(host);
+ at91_mci_process_next(host);
}
/*
@@ -593,7 +593,7 @@ static void at91_mci_request(struct mmc_
host->request = mrq;
host->flags = 0;
- at91mci_process_next(host);
+ at91_mci_process_next(host);
}
/*
@@ -706,7 +706,7 @@ static irqreturn_t at91_mci_irq(int irq,
if (int_status & AT91_MCI_ENDRX) {
pr_debug("Receive has ended\n");
- at91mci_post_dma_read(host);
+ at91_mci_post_dma_read(host);
}
if (int_status & AT91_MCI_NOTBUSY) {
@@ -735,7 +735,7 @@ static irqreturn_t at91_mci_irq(int irq,
if (completed) {
pr_debug("Completed command\n");
at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
- at91mci_completed_command(host);
+ at91_mci_completed_command(host);
} else
at91_mci_write(host, AT91_MCI_IDR, int_status);
next reply other threads:[~2007-06-19 16:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-19 16:32 Nicolas Ferre [this message]
2007-06-30 18:35 ` [PATCH] mmc: at91_mci typo Pierre Ossman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46780522.5030109@rfo.atmel.com \
--to=nicolas.ferre@rfo.atmel.com \
--cc=andrew@sanpeople.com \
--cc=drzeus@drzeus.cx \
--cc=hamish@prodigi.ch \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.pignat@hevs.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.