From: Alexey Starikovskiy <aystarik@gmail.com>
To: Rudolf Marek <r.marek@assembler.cz>
Cc: Luca Tettamanti <kronos.it@gmail.com>,
lm-sensors@lm-sensors.org, linux-acpi@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [lm-sensors] [RFC] ACPI based hwmon driver for ASUS
Date: Thu, 21 Jun 2007 23:15:35 +0400 [thread overview]
Message-ID: <467ACE57.2010400@gmail.com> (raw)
In-Reply-To: <467ACB2A.4070707@assembler.cz>
[-- Attachment #1: Type: text/plain, Size: 1763 bytes --]
Hi,
I think you might be interested in following patch, which implements _ACPI_ driver for the same hardware...
It is only "proof of concept" at the moment, but it does main thing -- reads hwmon device using ACPI interfaces.
Regards,
Alex.
Rudolf Marek wrote:
> Hi again,
>
> Of course it is not there because I removed it myself :/ The "sensors"
> command will just produce "general parse error" this is because of the
> unknown device class (imho). So I removed that and forgot. Well now I
> have the sysfs files:
>
> /sys/class/hwmon/hwmon2/device/:
> bus fan0_min fan2_input fan3_label in0_input in1_label
> in2_max in3_min temp0_crit temp1_input
> driver fan1_input fan2_label fan3_max in0_label in1_max
> in2_min name temp0_input temp1_label
> fan0_input fan1_label fan2_max fan3_min in0_max in1_min
> in3_input path temp0_label temp1_max
> fan0_label fan1_max fan2_min hid in0_min in2_input
> in3_label power temp0_max uevent
> fan0_max fan1_min fan3_input hwmon:hwmon2 in1_input in2_label
> in3_max subsystem temp1_crit
>
>
> Please note that in kernelsrc/Documentation/hwmon/sysfs-interface
> is defined the interface. We have fans starting from 1 and not 0
> Also temperatures are in milidegrees. So your 3200 should be 32000.
> Temps file starts also from 1 and not 0. (so no temp0...)
>
> Please can you fix this issues? I will do the review later once this
> things are fixed. Values seems to match.
>
> Thanks,
> Rudolf
> -
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
[-- Attachment #2: asoc.patch --]
[-- Type: text/x-patch, Size: 5162 bytes --]
ASOC
From: Alexey Starikovskiy <aystarik@gmail.com>
---
drivers/acpi/Makefile | 1
drivers/acpi/asoc.c | 154 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 155 insertions(+), 0 deletions(-)
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index d4336f1..0e61225 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -60,3 +60,4 @@ obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o
obj-y += cm_sbs.o
obj-$(CONFIG_ACPI_SBS) += sbs.o
+obj-m += asoc.o
diff --git a/drivers/acpi/asoc.c b/drivers/acpi/asoc.c
new file mode 100644
index 0000000..996ca9e
--- /dev/null
+++ b/drivers/acpi/asoc.c
@@ -0,0 +1,154 @@
+/*
+ * acpi_ac.c - ACPI ASUS hwmon driver
+ *
+ * Copyright (C) 2007 Alexey Starikovskiy <astarikovskiy@suse.de>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+
+MODULE_AUTHOR("Alexey Starikovskiy");
+MODULE_DESCRIPTION("ACPI ASUS hwmon Driver");
+MODULE_LICENSE("GPL");
+
+static int acpi_asoc_add(struct acpi_device *device);
+static int acpi_asoc_remove(struct acpi_device *device, int type);
+
+static struct acpi_driver acpi_asoc_driver = {
+ .name = "asoc",
+ .class = "ACPI ASUS hwmon",
+ .ids = "ATK0110",
+ .ops = {
+ .add = acpi_asoc_add,
+ .remove = acpi_asoc_remove,
+ },
+};
+
+struct acpi_asoc {
+ struct acpi_device * device;
+};
+
+static acpi_status asoc_read_sif(struct acpi_device *device, char prefix)
+{
+ int i, ret = 0;
+ unsigned long value;
+ acpi_status status = 0;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_buffer buffer2 = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *fsif = NULL;
+ union acpi_object *fdesc = NULL;
+ union acpi_object arg = {.type = ACPI_TYPE_INTEGER};
+ struct acpi_object_list arglist = {.count = 1, .pointer = &arg};
+ char name[5];
+
+ snprintf(name, 5, "%cSIF", prefix);
+ status = acpi_evaluate_object(device->handle, name, NULL, &buffer);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR PREFIX "Evaluating %s failed, status = %d\n", name, (int)status);
+ return -ENODEV;
+ }
+
+ fsif = buffer.pointer;
+ if (!fsif || (fsif->type != ACPI_TYPE_PACKAGE) || (!fsif->package.count)) {
+ printk(KERN_ERR PREFIX "Invalid data\n");
+ ret = -EFAULT;
+ goto error;
+ }
+ for (i = 1; i < fsif->package.count; ++i) {
+ status = acpi_evaluate_object(fsif->package.elements[i].reference.handle, NULL, NULL, &buffer2);
+ if (ACPI_FAILURE(status)) {
+ printk("element evaluation failed, status = %d\n", (int)status);
+ ret = -EFAULT;
+ goto error;
+ }
+ fdesc = buffer2.pointer;
+ snprintf(name, 5, "%cGET", prefix);
+ arg.integer.value = i - 1;
+ status = acpi_evaluate_integer(device->handle, name, &arglist, &value);
+ if (ACPI_FAILURE(status)) {
+ printk("%s evaluation failed, status = %d\n", name, (int)status);
+ ret = -EFAULT;
+ kfree(buffer2.pointer);
+ goto error;
+ }
+ printk(KERN_INFO PREFIX "\"%s\" [%d,%d] = %ld\n",
+ fdesc->package.elements[1].string.pointer,
+ (int)fdesc->package.elements[2].integer.value,
+ (int)fdesc->package.elements[3].integer.value,
+ value);
+ kfree(fdesc);
+ buffer2.pointer = NULL;
+ buffer2.length = ACPI_ALLOCATE_BUFFER;
+ }
+error:
+ kfree(buffer.pointer);
+ return ret;
+}
+
+static int acpi_asoc_add(struct acpi_device *device)
+{
+ int i, result = 0;
+ acpi_status status = AE_OK;
+ struct acpi_ac *ac = NULL;
+ char prefix[] = {'V', 'T', 'F'};
+
+ if (!device)
+ return -EINVAL;
+ for (i = 0; i < 3; ++i) {
+ result = asoc_read_sif(device, prefix[i]);
+ if (result)
+ return result;
+ }
+ return result;
+}
+
+static int acpi_asoc_remove(struct acpi_device *device, int type)
+{
+ acpi_status status = AE_OK;
+
+ if (!device)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int __init acpi_asoc_init(void)
+{
+ if (acpi_disabled)
+ return -ENODEV;
+ acpi_bus_register_driver(&acpi_asoc_driver);
+ return 0;
+}
+
+static void __exit acpi_asoc_exit(void)
+{
+ acpi_bus_unregister_driver(&acpi_asoc_driver);
+}
+
+module_init(acpi_asoc_init);
+module_exit(acpi_asoc_exit);
WARNING: multiple messages have this Message-ID (diff)
From: Alexey Starikovskiy <aystarik@gmail.com>
To: Rudolf Marek <r.marek@assembler.cz>
Cc: Luca Tettamanti <kronos.it@gmail.com>,
lm-sensors@lm-sensors.org, linux-acpi@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [lm-sensors] [RFC] ACPI based hwmon driver for ASUS
Date: Thu, 21 Jun 2007 19:15:35 +0000 [thread overview]
Message-ID: <467ACE57.2010400@gmail.com> (raw)
In-Reply-To: <467ACB2A.4070707@assembler.cz>
[-- Attachment #1: Type: text/plain, Size: 1763 bytes --]
Hi,
I think you might be interested in following patch, which implements _ACPI_ driver for the same hardware...
It is only "proof of concept" at the moment, but it does main thing -- reads hwmon device using ACPI interfaces.
Regards,
Alex.
Rudolf Marek wrote:
> Hi again,
>
> Of course it is not there because I removed it myself :/ The "sensors"
> command will just produce "general parse error" this is because of the
> unknown device class (imho). So I removed that and forgot. Well now I
> have the sysfs files:
>
> /sys/class/hwmon/hwmon2/device/:
> bus fan0_min fan2_input fan3_label in0_input in1_label
> in2_max in3_min temp0_crit temp1_input
> driver fan1_input fan2_label fan3_max in0_label in1_max
> in2_min name temp0_input temp1_label
> fan0_input fan1_label fan2_max fan3_min in0_max in1_min
> in3_input path temp0_label temp1_max
> fan0_label fan1_max fan2_min hid in0_min in2_input
> in3_label power temp0_max uevent
> fan0_max fan1_min fan3_input hwmon:hwmon2 in1_input in2_label
> in3_max subsystem temp1_crit
>
>
> Please note that in kernelsrc/Documentation/hwmon/sysfs-interface
> is defined the interface. We have fans starting from 1 and not 0
> Also temperatures are in milidegrees. So your 3200 should be 32000.
> Temps file starts also from 1 and not 0. (so no temp0...)
>
> Please can you fix this issues? I will do the review later once this
> things are fixed. Values seems to match.
>
> Thanks,
> Rudolf
> -
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
[-- Attachment #2: asoc.patch --]
[-- Type: text/x-patch, Size: 5162 bytes --]
ASOC
From: Alexey Starikovskiy <aystarik@gmail.com>
---
drivers/acpi/Makefile | 1
drivers/acpi/asoc.c | 154 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 155 insertions(+), 0 deletions(-)
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index d4336f1..0e61225 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -60,3 +60,4 @@ obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o
obj-y += cm_sbs.o
obj-$(CONFIG_ACPI_SBS) += sbs.o
+obj-m += asoc.o
diff --git a/drivers/acpi/asoc.c b/drivers/acpi/asoc.c
new file mode 100644
index 0000000..996ca9e
--- /dev/null
+++ b/drivers/acpi/asoc.c
@@ -0,0 +1,154 @@
+/*
+ * acpi_ac.c - ACPI ASUS hwmon driver
+ *
+ * Copyright (C) 2007 Alexey Starikovskiy <astarikovskiy@suse.de>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+
+MODULE_AUTHOR("Alexey Starikovskiy");
+MODULE_DESCRIPTION("ACPI ASUS hwmon Driver");
+MODULE_LICENSE("GPL");
+
+static int acpi_asoc_add(struct acpi_device *device);
+static int acpi_asoc_remove(struct acpi_device *device, int type);
+
+static struct acpi_driver acpi_asoc_driver = {
+ .name = "asoc",
+ .class = "ACPI ASUS hwmon",
+ .ids = "ATK0110",
+ .ops = {
+ .add = acpi_asoc_add,
+ .remove = acpi_asoc_remove,
+ },
+};
+
+struct acpi_asoc {
+ struct acpi_device * device;
+};
+
+static acpi_status asoc_read_sif(struct acpi_device *device, char prefix)
+{
+ int i, ret = 0;
+ unsigned long value;
+ acpi_status status = 0;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_buffer buffer2 = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *fsif = NULL;
+ union acpi_object *fdesc = NULL;
+ union acpi_object arg = {.type = ACPI_TYPE_INTEGER};
+ struct acpi_object_list arglist = {.count = 1, .pointer = &arg};
+ char name[5];
+
+ snprintf(name, 5, "%cSIF", prefix);
+ status = acpi_evaluate_object(device->handle, name, NULL, &buffer);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR PREFIX "Evaluating %s failed, status = %d\n", name, (int)status);
+ return -ENODEV;
+ }
+
+ fsif = buffer.pointer;
+ if (!fsif || (fsif->type != ACPI_TYPE_PACKAGE) || (!fsif->package.count)) {
+ printk(KERN_ERR PREFIX "Invalid data\n");
+ ret = -EFAULT;
+ goto error;
+ }
+ for (i = 1; i < fsif->package.count; ++i) {
+ status = acpi_evaluate_object(fsif->package.elements[i].reference.handle, NULL, NULL, &buffer2);
+ if (ACPI_FAILURE(status)) {
+ printk("element evaluation failed, status = %d\n", (int)status);
+ ret = -EFAULT;
+ goto error;
+ }
+ fdesc = buffer2.pointer;
+ snprintf(name, 5, "%cGET", prefix);
+ arg.integer.value = i - 1;
+ status = acpi_evaluate_integer(device->handle, name, &arglist, &value);
+ if (ACPI_FAILURE(status)) {
+ printk("%s evaluation failed, status = %d\n", name, (int)status);
+ ret = -EFAULT;
+ kfree(buffer2.pointer);
+ goto error;
+ }
+ printk(KERN_INFO PREFIX "\"%s\" [%d,%d] = %ld\n",
+ fdesc->package.elements[1].string.pointer,
+ (int)fdesc->package.elements[2].integer.value,
+ (int)fdesc->package.elements[3].integer.value,
+ value);
+ kfree(fdesc);
+ buffer2.pointer = NULL;
+ buffer2.length = ACPI_ALLOCATE_BUFFER;
+ }
+error:
+ kfree(buffer.pointer);
+ return ret;
+}
+
+static int acpi_asoc_add(struct acpi_device *device)
+{
+ int i, result = 0;
+ acpi_status status = AE_OK;
+ struct acpi_ac *ac = NULL;
+ char prefix[] = {'V', 'T', 'F'};
+
+ if (!device)
+ return -EINVAL;
+ for (i = 0; i < 3; ++i) {
+ result = asoc_read_sif(device, prefix[i]);
+ if (result)
+ return result;
+ }
+ return result;
+}
+
+static int acpi_asoc_remove(struct acpi_device *device, int type)
+{
+ acpi_status status = AE_OK;
+
+ if (!device)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int __init acpi_asoc_init(void)
+{
+ if (acpi_disabled)
+ return -ENODEV;
+ acpi_bus_register_driver(&acpi_asoc_driver);
+ return 0;
+}
+
+static void __exit acpi_asoc_exit(void)
+{
+ acpi_bus_unregister_driver(&acpi_asoc_driver);
+}
+
+module_init(acpi_asoc_init);
+module_exit(acpi_asoc_exit);
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next prev parent reply other threads:[~2007-06-21 19:15 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-13 22:33 [RFC] ACPI based hwmon driver for ASUS Luca Tettamanti
2007-05-13 22:33 ` [lm-sensors] " Luca Tettamanti
2007-05-21 21:29 ` Rudolf Marek
2007-05-21 21:29 ` Rudolf Marek
2007-05-21 21:38 ` Luca
2007-05-21 21:38 ` [lm-sensors] " Luca
2007-05-21 21:53 ` Luca
2007-05-21 21:53 ` Luca
2007-05-22 6:19 ` Rudolf Marek
2007-05-22 6:19 ` Rudolf Marek
2007-05-22 6:19 ` Rudolf Marek
2007-06-02 22:28 ` Luca Tettamanti
2007-06-02 22:28 ` Luca Tettamanti
2007-06-02 22:28 ` Luca Tettamanti
2007-06-21 18:49 ` Rudolf Marek
2007-06-21 18:49 ` Rudolf Marek
2007-06-21 19:33 ` Luca
2007-06-21 19:33 ` Luca
2007-06-21 19:02 ` Rudolf Marek
2007-06-21 19:02 ` Rudolf Marek
2007-06-21 19:15 ` Alexey Starikovskiy [this message]
2007-06-21 19:15 ` Alexey Starikovskiy
2007-06-21 20:11 ` Luca
2007-06-21 20:11 ` Luca
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=467ACE57.2010400@gmail.com \
--to=aystarik@gmail.com \
--cc=kronos.it@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=r.marek@assembler.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.