From mboxrd@z Thu Jan 1 00:00:00 1970 From: Grant Taylor Date: Fri, 22 Jun 2007 21:44:55 +0000 Subject: Re: [LARTC] Routing NDAS ? Message-Id: <467C42D7.2020703@riverviewtech.net> List-Id: References: <1741FFAACCEC074AA16B4B57DA95500E01F084@jos-ex1.josims.local> In-Reply-To: <1741FFAACCEC074AA16B4B57DA95500E01F084@jos-ex1.josims.local> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On 06/22/07 16:31, Andrew Lyon wrote: > the two segments are linked by a linux box that is doing routing and > proxy arp, Please bridge and do not use Proxy ARP. Or if you really want to use Proxy ARP make sure that you are only Proxy ARPing for the MAC addresses of the NDAS device(s) and the client(s) that need to connect to it. > can anybody suggest a way that I could access the ndas devices, Set up a bridging router (a.k.a. brouter) to bridge all layer 2 traffic except for IP (and a few other select protocols) traffic. You may only want to bridge traffic that is from the NDAS and or its client(s) and route the rest (DROP in the BROUTING chain of the broute table). Grant. . . . _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc