From: otto Meier <gf435@gmx.net>
To: linux-kernel@vger.kernel.org
Subject: sata_promise disk error 2.6.22-rc5 with hrt1 patch
Date: Sun, 24 Jun 2007 20:49:05 +0200 [thread overview]
Message-ID: <467EBCA1.5070702@gmx.net> (raw)
Hello,
I got the following in my logs:
Jun 24 19:06:40 gate2 kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x0
Jun 24 19:06:40 gate2 kernel: ata4.00: (port_status 0x00001000)
Jun 24 19:06:40 gate2 kernel: ata4.00: cmd
35/00:00:c1:17:92/00:04:17:00:00/e0 tag 0 cdb 0x0 data 524288 out
Jun 24 19:06:40 gate2 kernel: res
50/00:00:c0:1b:92/00:00:17:00:00/e0 Emask 0x20 (host bus error)
Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
488397168, hpa_sectors = 488397168
Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
488397168, hpa_sectors = 488397168
Jun 24 19:06:40 gate2 kernel: ata4.00: configured for UDMA/133
Jun 24 19:06:40 gate2 kernel: ata4: EH complete
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] 488397168 512-byte
hardware sectors (250059 MB)
Jun 24 19:06:40 gate2 kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x0
Jun 24 19:06:40 gate2 kernel: ata4.00: (port_status 0x00001000)
Jun 24 19:06:40 gate2 kernel: ata4.00: cmd
25/00:00:c1:15:92/00:02:17:00:00/e0 tag 0 cdb 0x0 data 262144 in
Jun 24 19:06:40 gate2 kernel: res
50/00:00:c0:17:92/00:00:17:00:00/e0 Emask 0x20 (host bus error)
Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
488397168, hpa_sectors = 488397168
Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors =
488397168, hpa_sectors = 488397168
Jun 24 19:06:40 gate2 kernel: ata4.00: configured for UDMA/133
Jun 24 19:06:40 gate2 kernel: ata4: EH complete
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write Protect is off
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write cache: enabled,
read cache: enabled, doesn't support DPO or FUA
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] 488397168 512-byte
hardware sectors (250059 MB)
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write Protect is off
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write cache: enabled,
read cache: enabled, doesn't support DPO or FUA
The system continued without seeing other effects.
It is runnuning a 2.6.22-rc5 kernel with hrt1 patch.
The drive ist part of a raid5 with 4 identical drives
lspci -vvv gives:
02:06.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA
300 TX4) (rev 02)
Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at bc00 [size=128]
Region 2: I/O ports at b800 [size=256]
Region 3: Memory at fdeff000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fdec0000 (32-bit, non-prefetchable) [size=128K]
[virtual] Expansion ROM at fdda0000 [disabled] [size=32K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Has anyone an idea whats going on?
Best regards
next reply other threads:[~2007-06-24 19:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-24 18:49 otto Meier [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-06-24 21:30 sata_promise disk error 2.6.22-rc5 with hrt1 patch Mikael Pettersson
2007-07-07 6:28 ` Dan Merillat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=467EBCA1.5070702@gmx.net \
--to=gf435@gmx.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.