From: Rainer Menzner <rmenzner@L1id.com>
To: ALSA Developer Mailing List <alsa-devel@alsa-project.org>
Subject: Re: NVidia AC97 / CK804: arecord hangs in system call poll()
Date: Mon, 02 Jul 2007 07:58:10 +0200 [thread overview]
Message-ID: <468893F2.5090708@L1id.com> (raw)
In-Reply-To: <s5hwsxmz7by.wl%tiwai@suse.de>
your guess was correct, I hadn't believed in such trivial solution.
Thanks,
-Rainer
Takashi Iwai wrote:
> At Fri, 29 Jun 2007 13:36:15 +0200,
> Rainer Menzner wrote:
>
>> Hi,
>>
>> my soundcard is an onboard AC97 CK804 NVidia. I use snd-intel8x0 module.
>> Everything works fine except recording sound. When calling
>>
>> arecord -f cd buffer.wav
>>
>> the program infinitely hangs, and an strace shows that it is a poll()
>> call that does not return. After interrupting, a wave file of 44 bytes
>> which is the header only is left. My setup is Kernel 2.6.21.3, all
>> ALSA-software is updated to the latest version, that is 1.0.14(a).
>>
>> In a previous setup with an older ALSA version and kernel 2.6.16.11
>> recording did work with the same hardware. Now that I updated all ALSA
>> software, even with that older kernel version the same recording problem
>> came up. From that I concluded that it is somehow related to the
>> ALSA-lib version. I have tried to downgrade ALSA-lib down to 1.0.0 to no
>> avail.
>>
>> I have also made tests appropriate if this would be an interrupt problem
>> (using pci=noroute et al) which also did not solve the problem.
>>
>> I have scrolled though the archives of alsa-user and there have been a
>> few posts regarding the same problem (but with other chip sets).
>> However, in those threads no definitive solution of the problem has been
>> discussed. So I tried it again in alsa-user but did not get any feedback ...
>>
>> Now, I finally try this developer list. Your comments and help are much
>> appreciated. Let me know if you need further info. I'm not a Linux
>> system programmer or specialist, but I would be willing to do some
>> debugging if somebody explains what to check.
>>
>
> Most likely a mixer configuration. For example, it's now set up to
> record from the SPDIF input or so.
> You can check the detailed configuration from the generated file via
> "alsactl -f somefile store".
>
>
> Takashi
>
>
--
______________________________________________
*Dr. Rainer Menzner*
Principal Engineer, R&D
*L-1 Identity Solutions AG*
/Protecting and Securing Personal Identities and Assets/
Universitätsstr. 160
44801 Bochum, Germany
Telephone: +49-234-9787-41
Facsimile: +49-234-9787-77
Mobile: 0160 / 700 99 07
email: rmenzner@L1id.com <mailto:rmenzner@L1id.com>
www.L1ID.com <http://www.l1id.com/>
This message is only for the use of the intended recipient and may
contain information that is CONFIDENTIAL and PROPRIETARY to L-1 Identity
Solutions. If you are not the intended recipient, please erase all
copies of the message and its attachments and notify the sender immediately.
VORSTAND / EXECUTIVE BOARD Hartmuth von Maltzahn (Vors. / Chairman), Dr.
Stefan Gehlen | AUFSICHTSRAT / SUPERVISORY BOARD James H. Moar (Vors. /
Chairman) | GERICHTSSTAND / REGISTER COURT Amtsgericht Bochum, HRB 69 54
| UST-ID / VAT-REG.-NO. DE 813124378
prev parent reply other threads:[~2007-07-02 5:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-29 11:36 NVidia AC97 / CK804: arecord hangs in system call poll() Rainer Menzner
2007-06-29 23:09 ` Takashi Iwai
2007-07-02 5:58 ` Rainer Menzner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=468893F2.5090708@L1id.com \
--to=rmenzner@l1id.com \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.