From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <46890B62.50901@domain.hid>
Date: Mon, 02 Jul 2007 16:27:46 +0200
From: Johan Borkhuis <j.borkhuis@domain.hid>
MIME-Version: 1.0
References: <4688E0BD.40709@domain.hid> <1183377266.19565.14.camel@domain.hid>
In-Reply-To: <1183377266.19565.14.camel@domain.hid>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Subject: Re: [Xenomai-help] Switch to secondary mode
List-Id: Help regarding installation and common use of Xenomai
	<xenomai.xenomai.org>
List-Unsubscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
List-Archive: </public/xenomai-help>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-help-request@domain.hid>
List-Subscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
To: rpm@xenomai.org
Cc: Xenomai-help@domain.hid

One more question.

I tried finding the cause of the switch using the backtrace commands, 
but this does not give a very clear picture of what is causing the 
switch. Are there other commands that give a better view, or is there 
some instruction (or just a direction) on how to interpret the backtrace?

Kind regards,
    Johan Borkhuis