From mboxrd@z Thu Jan 1 00:00:00 1970 From: eric Subject: RTC wakeup Date: Tue, 03 Jul 2007 14:56:55 -0400 Message-ID: <468A9BF7.7030201@gmail.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------000403010903040805090305" Return-path: Received: from nz-out-0506.google.com ([64.233.162.224]:7903 "EHLO nz-out-0506.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756012AbXGCS5b (ORCPT ); Tue, 3 Jul 2007 14:57:31 -0400 Received: by nz-out-0506.google.com with SMTP id s18so1319094nze for ; Tue, 03 Jul 2007 11:57:30 -0700 (PDT) Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: linux-acpi@vger.kernel.org This is a multi-part message in MIME format. --------------000403010903040805090305 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit I'm currently trying to activate the RTC alarm that I setup under CMOS, which supposed to wakeup the system at certain time on the daily basis. If I shutdown the system under Windows OS, RTC alarm wakeup the system as intended; however, after shutdown under Linux (Fedora - kernel ver. 2.6.21-1.3240.fc8) it fails to wakeup the system. The system's chipset that is FAILING under linux: NVIDIA MCP61S motherboard: ECS GeFforce6100S-M The system's chipset that is WORKING OK under linux: RS482 (northbridge) , SB400/SB450 (southbridge) motherboard: ECS RS482-M Sorry: resent due to missing attachments ----------------------------------------------- Any suggested workaround solution would be appreciated. Attached is a copy of the outputs from: dmesg, /proc/acpi/wakeup, dmidecode thanks. eric --------------000403010903040805090305 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.txt" Linux version 2.6.21-1.3240.fc8 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070615 (Red Hat 4.1.2-13)) #1 SMP Mon Jun 25 20:04:45 EDT 2007 Command line: ro root=LABEL=/ rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bee0000 (usable) BIOS-e820: 000000003bee0000 - 000000003bee3000 (ACPI NVS) BIOS-e820: 000000003bee3000 - 000000003bef0000 (ACPI data) BIOS-e820: 000000003bef0000 - 000000003bf00000 (reserved) BIOS-e820: 000000003c000000 - 0000000040000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 245472) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.2 present. ACPI: RSDP 000F7A10, 0014 (r0 Nvidia) ACPI: RSDT 3BEE3040, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) ACPI: FACP 3BEE30C0, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) ACPI Warning (tbfadt-0434): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126] ACPI: DSDT 3BEE3180, 6395 (r1 NVIDIA NVDAACPI 1000 MSFT 100000E) ACPI: FACS 3BEE0000, 0040 ACPI: SSDT 3BEE9640, 0248 (r1 PTLTD POWERNOW 1 LTP 1) ACPI: HPET 3BEE9900, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 98) ACPI: MCFG 3BEE9980, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA 0) ACPI: APIC 3BEE9580, 007C (r1 Nvidia NVDAACPI 42302E31 NVDA 0) Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000003bee0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 245472) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000003bee0000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 245472 On node 0 totalpages: 245375 DMA zone: 88 pages used for memmap DMA zone: 2377 pages reserved DMA zone: 1534 pages, LIFO batch:0 DMA32 zone: 5185 pages used for memmap DMA32 zone: 236191 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfeff0000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 41864 bytes of per cpu data Built 1 zonelists. Total pages: 237725 Kernel command line: ro root=LABEL=/ rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2310.647 MHz processor. Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1648 kB per task-struct memory footprint: 1680 bytes Checking aperture... CPU 0: aperture @ 2e000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 946084k/981888k available (2416k kernel code, 35416k reserved, 1467k data, 320k init) SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 4625.37 BogoMIPS (lpj=2312688) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 lockdep: not fixing up alternatives. ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12557877 Detected 12.557 MHz APIC timer. lockdep: not fixing up alternatives. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4621.39 BogoMIPS (lpj=2310697) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01 Brought up 2 CPUs sizeof(vma)=176 bytes sizeof(page)=88 bytes sizeof(inode)=1008 bytes sizeof(dentry)=248 bytes sizeof(ext3inode)=1376 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=3920 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at f0000000 - f3ffffff PCI: No mmconfig possible on device 00:18 ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:04.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz ACPI: RTC can wake from S4 Time: hpet clocksource has been installed. pnp: 00:01: ioport range 0x1000-0x107f has been reserved pnp: 00:01: ioport range 0x1080-0x10ff has been reserved pnp: 00:01: ioport range 0x1400-0x147f has been reserved pnp: 00:01: ioport range 0x1480-0x14ff has been reserved pnp: 00:01: ioport range 0x1800-0x187f has been reserved pnp: 00:01: ioport range 0x1880-0x18ff has been reserved pnp: 00:01: ioport range 0x2000-0x207f has been reserved pnp: 00:01: ioport range 0x2080-0x20ff has been reserved pnp: 00:01: iomem range 0x0-0x0 could not be reserved pnp: 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved pnp: 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved pnp: 00:01: iomem range 0x3c000000-0x3fffffff could not be reserved pnp: 00:0d: iomem range 0xf0000000-0xf3ffffff could not be reserved pnp: 00:0e: iomem range 0xf0000-0xfffff could not be reserved pnp: 00:0e: iomem range 0xfeff0000-0xfeff00ff could not be reserved pnp: 00:0e: iomem range 0x3bee0000-0x3befffff could not be reserved pnp: 00:0e: iomem range 0xffff0000-0xffffffff has been reserved PCI: Bridge: 0000:00:04.0 IO window: c000-cfff MEM window: fdf00000-fdffffff PREFETCH window: fd800000-fd8fffff PCI: Bridge: 0000:00:09.0 IO window: b000-bfff MEM window: fde00000-fdefffff PREFETCH window: fdd00000-fddfffff PCI: Bridge: 0000:00:0b.0 IO window: a000-afff MEM window: fdc00000-fdcfffff PREFETCH window: fdb00000-fdbfffff PCI: Bridge: 0000:00:0c.0 IO window: 9000-9fff MEM window: fda00000-fdafffff PREFETCH window: fd900000-fd9fffff PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3145k freed audit: initializing netlink socket (disabled) audit(1183467715.938:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key E7A1F74B94C80B08 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:0d.0 PCI: Setting latency timer of device 0000:00:09.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:09.0:pcie00] Allocate Port Service[0000:00:09.0:pcie03] PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (21 C) hpet_resources: 0xfeff0000 is busy Generic RTC Driver v1.07 Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (version 2.00.00) powernow-k8: 0 : fid 0xf (2300 MHz), vid 0x9 powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xa powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xc powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 320k freed Write protecting the kernel read-only data: 1088k USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected input: ImPS/2 Generic Wheel Mouse as /class/input/input2 SCSI subsystem initialized libata version 2.21 loaded. sata_nv 0000:00:08.0: version 3.4 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001d800 irq 0 ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001d808 irq 0 usb 2-1: new high speed USB device using ehci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ata_hpa_resize 1: sectors = 586072368, hpa_sectors = 586072368 ata1.00: ATA-7: ST3300622AS, 3.AAH, max UDMA/133 ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: ata_hpa_resize 1: sectors = 586072368, hpa_sectors = 586072368 ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x0000000000010977 scsi 0:0:0:0: Direct-Access ATA ST3300622AS 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk pata_amd 0000:00:06.0: version 0.3.8 PCI: Setting latency timer of device 0000:00:06.0 to 64 scsi2 : pata_amd scsi3 : pata_amd ata3: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14 ata4: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15 ata3.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.23, max UDMA/66 ata3.00: configured for UDMA/66 ata4: port disabled. ignoring. scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.23 PQ: 0 ANSI: 5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1183467723.766:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1818 types, 79 bools, 1 sens, 1024 cats security: 60 classes, 67250 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda2, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1183467724.250:3): policy loaded auid=4294967295 audit(1183467724.682:4): avc: denied { getattr } for pid=546 comm="mount" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 2:0:0:0: Attached scsi generic sg1 type 5 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:07.0 to 64 forcedeth: using HIGHDMA rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] eth0: forcedeth.c: subsystem: 01019:2602 bound to 0000:00:07.0 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 3c59x: Donald Becker and others. 0000:01:05.0: 3Com PCI 3c905B Cyclone 100baseTx at ffffc200001f4000. PCI: Setting latency timer of device 0000:01:05.0 to 64 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:05.0 to 64 usb 2-1: reset high speed USB device using ehci_hcd and address 2 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... zd1211rw_mac80211 2-1:1.0: firmware version 4605 zd1211rw_mac80211 2-1:1.0: zd1211 chip 0ace:1211 v4330 high 00-11-a3 RF2959_RF pa0 ----- wmaster0: Selected rate control algorithm 'simple' zd1211rw_mac80211 2-1:1.0: phy0 usbcore: registered new interface driver zd1211rw_mac80211 SELinux: initialized (dev kvmfs, type kvmfs), uses genfs_contexts loop: module loaded FDC 0 is a post-1991 82077 lp0: using parport0 (interrupt-driven). lp0: console ready audit(1183482131.774:5): avc: denied { getattr } for pid=1473 comm="mount" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem No dock devices found. input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded audit(1183482133.327:6): avc: denied { getattr } for pid=1571 comm="fsck" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:fsadm_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem audit(1183482133.393:7): avc: denied { getattr } for pid=1572 comm="fsck.ext3" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:fsadm_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem audit(1183482133.421:8): avc: denied { getattr } for pid=1573 comm="fsck.ext3" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:fsadm_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem audit(1183482133.521:9): avc: denied { getattr } for pid=1576 comm="mount" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem EXT3 FS on sda2, internal journal audit(1183482133.723:10): avc: denied { getattr } for pid=1580 comm="mount" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem audit(1183482133.729:11): avc: denied { getattr } for pid=1581 comm="mount" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem audit(1183482133.733:12): avc: denied { getattr } for pid=1582 comm="mount" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem audit(1183482133.738:13): avc: denied { getattr } for pid=1583 comm="mount" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem audit(1183482133.743:14): avc: denied { getattr } for pid=1584 comm="mount" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem audit(1183482133.747:15): avc: denied { getattr } for pid=1585 comm="mount" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda5, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs audit(1183482134.563:16): avc: denied { getattr } for pid=1634 comm="swapon" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:fsadm_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem Adding 2048276k swap on /dev/sda3. Priority:-1 extents:1 across:2048276k audit(1183482134.589:17): avc: denied { getattr } for pid=1635 comm="mount" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts audit(1183482136.542:18): avc: denied { getattr } for pid=1757 comm="iptables-restor" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:iptables_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (3835 buckets, 30680 max) NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 audit(1183482139.527:19): avc: denied { getattr } for pid=1987 comm="ifconfig" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:ifconfig_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem audit(1183482144.401:20): avc: denied { getattr } for pid=2126 comm="ifconfig" name="/" dev=selinuxfs ino=1 scontext=system_u:system_r:ifconfig_t:s0 tcontext=system_u:object_r:security_t:s0 tclass=filesystem audit(1183482144.853:21): audit_pid=2170 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts eth1: no IPv6 routers present Bridge firewalling registered device eth1 entered promiscuous mode br80: port 1(eth1) entering learning state tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky device tap82 entered promiscuous mode br80: port 2(tap82) entering learning state br80: no IPv6 routers present tap82: no IPv6 routers present eth1: no IPv6 routers present br80: topology change detected, propagating br80: port 1(eth1) entering forwarding state br80: topology change detected, propagating br80: port 2(tap82) entering forwarding state kvm: emulating exchange as write --------------000403010903040805090305 Content-Type: text/plain; name="dmidecode.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmidecode.txt" # dmidecode 2.7 SMBIOS 2.2 present. 46 structures occupying 1734 bytes. Table at 0x000F0000. Handle 0x0000, DMI type 0, 19 bytes. BIOS Information Vendor: Phoenix Technologies, LTD Version: 6.00 PG Release Date: 03/03/2007 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported Handle 0x0001, DMI type 1, 25 bytes. System Information Manufacturer: Product Name: Version: Serial Number: UUID: FEFEFEFE-FEFE-FEFE-FEFE-FEFEFEFEFEFE Wake-up Type: Power Switch Handle 0x0002, DMI type 188, 255 bytes. OEM-specific Type Header and Data: BC FF 02 00 4B 38 4E 50 54 44 52 41 4D 30 03 00 00 00 00 00 3F 00 00 00 00 00 01 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 40 00 10 0A 00 00 00 00 00 00 04 00 EF 02 00 FF 01 00 00 00 81 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 3F 38 00 00 00 00 00 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 24 C2 6A 5D 20 13 12 00 10 04 01 00 6A 00 10 67 88 88 FF FE 14 14 14 15 13 13 13 13 14 00 00 00 12 13 13 13 14 13 13 14 12 00 00 00 2D 00 00 00 00 00 00 00 00 00 00 00 00 2F 2F 2F 2F 2F 2F 2F 2F 00 00 00 00 00 22 12 11 20 20 22 20 00 22 12 11 10 20 22 20 00 00 00 00 00 00 00 00 Strings: Handle 0x0003, DMI type 190, 255 bytes. OEM-specific Type Header and Data: BE FF 03 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 01 06 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Strings: Handle 0x0004, DMI type 2, 8 bytes. Base Board Information Manufacturer: Product Name: NF-MCP61 Version: Serial Number: Handle 0x0005, DMI type 3, 13 bytes. Chassis Information Manufacturer: Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown Handle 0x0006, DMI type 4, 32 bytes. Processor Information Socket Designation: Socket M2 Type: Central Processor Family: Sempron Manufacturer: AMD ID: B1 0F 06 00 FF FB 8B 17 Signature: Extended Family 0, Model B, Stepping 1 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) HTT (Hyper-threading technology) Version: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ Voltage: 1.3 V External Clock: 201 MHz Max Speed: 3000 MHz Current Speed: 2312 MHz Status: Populated, Enabled Upgrade: Socket 940 L1 Cache Handle: 0x000D L2 Cache Handle: 0x000F L3 Cache Handle: No L3 Cache Handle 0x0007, DMI type 4, 32 bytes. Processor Information Socket Designation: Socket M2 Type: Central Processor Family: Sempron Manufacturer: AMD ID: B1 0F 06 00 FF FB 8B 17 Signature: Extended Family 0, Model B, Stepping 1 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) HTT (Hyper-threading technology) Version: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ Voltage: 1.3 V External Clock: 201 MHz Max Speed: 3000 MHz Current Speed: 2312 MHz Status: Populated, Enabled Upgrade: Socket 940 L1 Cache Handle: 0x000E L2 Cache Handle: 0x0010 L3 Cache Handle: No L3 Cache Handle 0x0008, DMI type 5, 24 bytes. Memory Controller Information Error Detecting Method: 64-bit ECC Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 4096 MB Maximum Total Memory Size: 16384 MB Supported Speeds: 70 ns 60 ns 50 ns Supported Memory Types: Standard DIMM Memory Module Voltage: 2.9 V Associated Memory Slots: 4 0x0009 0x000A 0x000B 0x000C Enabled Error Correcting Capabilities: None Handle 0x0009, DMI type 6, 12 bytes. Memory Module Information Socket Designation: A0 Bank Connections: 0 1 Current Speed: 6 ns Type: Other Unknown EDO Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK Handle 0x000A, DMI type 6, 12 bytes. Memory Module Information Socket Designation: A1 Bank Connections: None Current Speed: 6 ns Type: Other Unknown EDO Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x000B, DMI type 6, 12 bytes. Memory Module Information Socket Designation: A2 Bank Connections: None Current Speed: 6 ns Type: Other Unknown EDO Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x000C, DMI type 6, 12 bytes. Memory Module Information Socket Designation: A3 Bank Connections: None Current Speed: 6 ns Type: Other Unknown EDO Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x000D, DMI type 7, 19 bytes. Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 KB Maximum Size: 128 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000E, DMI type 7, 19 bytes. Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 KB Maximum Size: 128 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000F, DMI type 7, 19 bytes. Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 512 KB Maximum Size: 512 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0010, DMI type 7, 19 bytes. Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 512 KB Maximum Size: 512 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0011, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PRIMARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0012, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: SECONDARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0013, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: 8251 FIFO Compatible Handle 0x0014, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x0015, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM2 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x0016, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x0017, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x0018, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0019, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB0 External Connector Type: Other Port Type: USB Handle 0x001A, DMI type 9, 13 bytes. System Slot Information Designation: PCI0 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 1 Characteristics: 5.0 V is provided PME signal is supported Handle 0x001B, DMI type 9, 13 bytes. System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Available Length: Long ID: 2 Characteristics: 5.0 V is provided PME signal is supported Handle 0x001C, DMI type 9, 13 bytes. System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: Available Length: Long ID: 3 Characteristics: 5.0 V is provided PME signal is supported Handle 0x001D, DMI type 9, 13 bytes. System Slot Information Designation: PCI3 Type: 32-bit PCI Current Usage: Available Length: Long ID: 4 Characteristics: 5.0 V is provided PME signal is supported Handle 0x001E, DMI type 9, 13 bytes. System Slot Information Designation: PCI4 Type: 32-bit PCI Express Current Usage: In Use Length: Long Characteristics: 5.0 V is provided PME signal is supported Handle 0x001F, DMI type 9, 13 bytes. System Slot Information Designation: PCI5 Type: 32-bit PCI Express Current Usage: In Use Length: Long Characteristics: 5.0 V is provided PME signal is supported Handle 0x0020, DMI type 9, 13 bytes. System Slot Information Designation: PCI6 Type: 32-bit PCI Express Current Usage: In Use Length: Long Characteristics: 5.0 V is provided PME signal is supported Handle 0x0021, DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1 Handle 0x0022, DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 16 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0023, DMI type 17, 21 bytes. Memory Device Array Handle: 0x0022 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: Unknown Type Detail: None Handle 0x0024, DMI type 17, 21 bytes. Memory Device Array Handle: 0x0022 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: A1 Bank Locator: Bank2/3 Type: Unknown Type Detail: None Handle 0x0025, DMI type 17, 21 bytes. Memory Device Array Handle: 0x0022 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: A2 Bank Locator: Bank4/5 Type: Unknown Type Detail: None Handle 0x0026, DMI type 17, 21 bytes. Memory Device Array Handle: 0x0022 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: A3 Bank Locator: Bank6/7 Type: Unknown Type Detail: None Handle 0x0027, DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Array Handle: 0x0022 Partition Width: 0 Handle 0x0028, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Device Handle: 0x0023 Memory Array Mapped Address Handle: 0x0027 Partition Row Position: 1 Handle 0x0029, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x0024 Memory Array Mapped Address Handle: 0x0027 Partition Row Position: 1 Handle 0x002A, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x0025 Memory Array Mapped Address Handle: 0x0027 Partition Row Position: 1 Handle 0x002B, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x0026 Memory Array Mapped Address Handle: 0x0027 Partition Row Position: 1 Handle 0x002C, DMI type 32, 11 bytes. System Boot Information Status: No errors detected Handle 0x002D, DMI type 127, 4 bytes. End Of Table --------------000403010903040805090305 Content-Type: text/plain; name="wakeup.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="wakeup.txt" Device S-state Status Sysfs node HUB0 S5 enabled pci:0000:00:04.0 XVR0 S5 enabled pci:0000:00:09.0 XVR1 S5 enabled pci:0000:00:0b.0 XVR2 S5 enabled pci:0000:00:0c.0 UAR1 S5 enabled pnp:00:09 USB0 S3 enabled pci:0000:00:02.0 USB2 S3 enabled pci:0000:00:02.1 AZAD S5 enabled pci:0000:00:05.0 MMAC S5 enabled pci:0000:00:07.0 --------------000403010903040805090305--