From: "Renato S. Yamane" <renatoyamane@mandic.com.br>
To: linux-kernel@vger.kernel.org
Cc: oakad@yahoo.com
Subject: [tifm] Infinite loop
Date: Tue, 03 Jul 2007 19:50:07 -0300 [thread overview]
Message-ID: <468AD29F.6040908@mandic.com.br> (raw)
When I insert a SDCard in my laptop M45-S355 my system crash because
tifm start a infinite loop. See below more detail about SD/MMC Card and
infinite loop.
05:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at b8001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=05, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 88000000-8bfff000 (prefetchable)
Memory window 1: bc000000-bffff000
I/O window 0: 00008000-000080ff
I/O window 1: 00008400-000084ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+
PostWrite+
16-bit legacy interface ports at 0001
05:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394
Host Controller (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (500ns min, 1000ns max), Cache Line Size: 16 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at b8004000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
05:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated
FlashMedia Controller
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes
Interrupt: pin D routed to IRQ 5
Region 0: Memory at b8008000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
05:06.4 Generic system peripheral [0805]: Texas Instruments PCI6411,
PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure
Digital (SD) Controller
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at b800a000 (32-bit, non-prefetchable) [size=256]
Region 1: Memory at b800a100 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at b800a200 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
======================
[<c02be23a>] __sched_text_start+0x62/0x558
[<c011f14b>] process_timeout+0x0/0x5
[<c011f118>] msleep+0xd/0x12
[<f9197091>] tifm_7xx1_toggle_sock_power+0x91/0xb2 [tifm_7xx1]
[<f91974c9>] tifm_7xx1_switch_media+0x6c/0x3a7 [tifm_7xx1]
[<c0127c93>] autoremove_wake_function+0x0/0x35
[<f919745d>] tifm_7xx1_switch_media+0x0/0x3a7 [tifm_7xx1]
[<c0127bcc>] kthread+0xa0/0xc8
[<c0127b2c>] kthread+0x0/0xc8
[<c0104823>] kernel_thread_helper+0x7/0x10
=======================
[<c02be23a>] __sched_text_start+0x62/0x558
[<c0118b17>] printk+0x1b/0x1f
[<c02bef2a>] schedule_timeout+0x7a/0x97
[<c011f14b>] process_timeout+0x0/0x5
[<c011f118>] msleep+0xd/0x12
[<f9197079>] tifm_7xx1_toggle_sock_power+0x79/0xb2 [tifm_7xx1]
[<f9197611>] tifm_7xx1_switch_media+0x1b4/0x3a7 [tifm_7xx1]
[<c0127c93>] autoremove_wake_function+0x0/0x35
[<f919745d>] tifm_7xx1_switch_media+0x0/0x3a7 [tifm_7xx1]
[<c0127bcc>] kthread+0xa0/0xc8
[<c0127b2c>] kthread+0x0/0xc8
[<c0104823>] kernel_thread_helper+0x7/0x10
=======================
[<c02be23a>] __sched_text_start+0x62/0x558
[<c02bef2a>] schedule_timeout+0x7a/0x97
[<c011f14b>] process_timeout+0x0/0x5
[<c011f118>] msleep+0xd/0x12
[<f9197091>] tifm_7xx1_toggle_sock_power+0x91/0xb2 [tifm_7xx1]
[<f9197611>] tifm_7xx1_switch_media+0x1b4/0x3a7 [tifm_7xx1]
[<c0127c93>] autoremove_wake_function+0x0/0x35
[<f919745d>] tifm_7xx1_switch_media+0x0/0x3a7 [tifm_7xx1]
[<c0127bcc>] kthread+0xa0/0xc8
[<c0127b2c>] kthread+0x0/0xc8
[<c0104823>] kernel_thread_helper+0x7/0x10
=======================
[<c02be23a>] __sched_text_start+0x62/0x558
[<c02bef2a>] schedule_timeout+0x7a/0x97
[<c011f14b>] process_timeout+0x0/0x5
[<c011f118>] msleep+0xd/0x12
[<f9197091>] tifm_7xx1_toggle_sock_power+0x91/0xb2 [tifm_7xx1]
[<f9197611>] tifm_7xx1_switch_media+0x1b4/0x3a7 [tifm_7xx1]
[<c0127c93>] autoremove_wake_function+0x0/0x35
[<f919745d>] tifm_7xx1_switch_media+0x0/0x3a7 [tifm_7xx1]
[<c0127bcc>] kthread+0xa0/0xc8
[<c0127b2c>] kthread+0x0/0xc8
[<c0104823>] kernel_thread_helper+0x7/0x10
=======================
tifm_7xx1: sd card detected in socket 3
[<c02be23a>] __sched_text_start+0x62/0x558
[<f91974c9>] tifm_7xx1_switch_media+0x6c/0x3a7 [tifm_7xx1]
[<c0127c93>] autoremove_wake_function+0x0/0x35
[<f919745d>] tifm_7xx1_switch_media+0x0/0x3a7 [tifm_7xx1]
[<c0127bcc>] kthread+0xa0/0xc8
[<c0127b2c>] kthread+0x0/0xc8
[<c0104823>] kernel_thread_helper+0x7/0x10
=======================
74c9>] tifm_7xx1_switch_media+0x6c/0x3a7 [tifm_7xx1]
[<c0127c93>] autoremove_wake_function+0x0/0x35
[<f919745d>] tifm_7xx1_switch_media+0x0/0x3a7 [tifm_7xx1]
[<c0127bcc>] kthread+0xa0/0xc8
[<c0127b2c>] kthread+0x0/0xc8
[<c0104823>] kernel_thread_helper+0x7/0x10
=======================
[<c02be23a>] __sched_text_start+0x62/0x558
[<f91974c9>] tifm_7xx1_switch_media+0x6c/0x3a7 [tifm_7xx1]
[<c0127c93>] autoremove_wake_function+0x0/0x35
[<f919745d>] tifm_7xx1_switch_media+0x0/0x3a7 [tifm_7xx1]
[<c0127bcc>] kthread+0xa0/0xc8
[<c0127b2c>] kthread+0x0/0xc8
[<c0104823>] kernel_thread_helper+0x7/0x10
Best regards,
Renato S. Yamane
next reply other threads:[~2007-07-03 22:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-03 22:50 Renato S. Yamane [this message]
2007-07-03 23:13 ` [tifm] Infinite loop Renato S. Yamane
2007-07-04 2:49 ` Alex Dubov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=468AD29F.6040908@mandic.com.br \
--to=renatoyamane@mandic.com.br \
--cc=linux-kernel@vger.kernel.org \
--cc=oakad@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.