From: Ben Greear <greearb@candelatech.com>
To: NetDev <netdev@vger.kernel.org>
Subject: Does the Netxen driver work?
Date: Fri, 06 Jul 2007 12:05:49 -0700 [thread overview]
Message-ID: <468E928D.20606@candelatech.com> (raw)
Hello!
I just got some Netxen 10Gbe CX4 adapters and put them into freshly
updated Fedora 7 64-bit systems. So far, I am not having much luck.
Kernel is: Official F7 2.6.21-1.3228.fc7
NIC:
01:00.0 Ethernet controller: NetXen Incorporated NXB-10GCX4 10 Gigabit Ethernet PCIe Adapter with CX4 copper interface (rev 25)
The motherboard chipset is Intel based (I can provide more info is someone
cares..but I first wanted to make sure there are no well-known issues.)
Interesting boot messages:
Jul 5 16:15:17 a440-dc kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jul 5 16:15:17 a440-dc kernel: netxen-nic: unable to allocate MSI interrupt error
Jul 5 16:15:17 a440-dc kernel: netxen-nic: XGbE board initialized
Is that MSI error fatal?
The two NICs are connected by a CX4 cable, and from dmesg output, it appears
they have negotiated link properly.
However, I see tx counters incrementing on both sides, but no rx counters.
I will try the latest 22-pre kernel in the meantime, but if anyone has
any experience getting these NICs to work, I'm interested to know about it.
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
next reply other threads:[~2007-07-06 19:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-06 19:05 Ben Greear [this message]
2007-07-06 19:21 ` Does the Netxen driver work? Ben Greear
2007-07-09 17:31 ` Chuck Ebbert
2007-07-10 4:33 ` Dhananjay Phadke
2007-07-10 16:01 ` Chuck Ebbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=468E928D.20606@candelatech.com \
--to=greearb@candelatech.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.