From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Date: Sun, 08 Jul 2007 19:02:40 +0000 Subject: Re: [lm-sensors] PATCH: hwmon-f71882fg-new-driver.patch Message-Id: <469134D0.90109@hhs.nl> List-Id: References: <468E48BA.4060005@hhs.nl> In-Reply-To: <468E48BA.4060005@hhs.nl> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Jean Delvare wrote: > Hi Hans, > > On Fri, 06 Jul 2007 15:50:50 +0200, Hans de Goede wrote: >> This is a new driver for the hardware monitoring features of the Fintek >> F71882FG and F71883FG Super-I/O chips. >> >> This version of the driver does not support the pwm part of these chips (yet). >> I'll first design a sysfs api for this and post that for discussion, and then >> implement pwm support as an incremental patch over this one. > > Can you please update the F71882FG entry in wiki/Devices? > Done. >> This driver supports all sensors of this chip, except for the vid inputs. The >> vid inputs are somewhat documented in the datasheet, but I know nothing about >> vid/vrm stuff. Help with this would be much appreciated. > > This isn't very difficult. Did you read doc/vid (in the lm-sensors > source tree) already? That would be a good starting point. Then if you > have specific questions, just ask and I'll try to help. > Thanks for the pointer, I'll take a look. Regards, Hans _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors