From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Date: Tue, 10 Jul 2007 06:10:39 +0000 Subject: Re: [lm-sensors] Any questions you would like to ask the pc wizard Message-Id: <469322DF.8030709@hhs.nl> List-Id: References: <4690AE3A.3090008@hhs.nl> In-Reply-To: <4690AE3A.3090008@hhs.nl> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Jean Delvare wrote: > On Sun, 08 Jul 2007 11:28:26 +0200, Hans de Goede wrote: >> I've been contacted by Franck Delattre, the author of a windows utility called >> pc wizard, for permission to use my uguru3 code (and I've given him permission >> to use it). >> >> He has offered to answer any questions he can about things which are supported >> by PC wizard but not by lm-sensors. So if you have any questions send them my >> way and I'll forward them. > > This is very good news. We had this kind of cooperation with Alex van > Kaam when he was still working on MBM, and this proved to be very > useful. > > If Franck happens to have information on how to handle the ICH8 internal > sensors (HECI controller), that would be interesting. > > http://www.lm-sensors.org/ticket/2134 > Here is Franck's answer: --- Hi Hans, I unfortunately know little about HECI. The ICH8 contains two thermal sensors, according to the DS, but nothing mentions if they can be accessed by software. The thermal sensor on P/Q/G965 (and also P35) provides an interface through the MCHBAR (some control registers, and a status register). This may not help you a lot, sorry about that. I'll try to get more information, and will keep you informed if I get something interesting. Best regards, Franck --- Regards, Hans _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors