From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chris Ruehl Subject: aacraid 2.6.21+ partition table disappear Date: Wed, 18 Jul 2007 17:47:37 +0800 Message-ID: <469DE1B9.6030107@xit.com.hk> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from si01.xit.com.hk ([202.67.236.24]:56078 "EHLO si01.xit.com.hk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752741AbXGRKIF (ORCPT ); Wed, 18 Jul 2007 06:08:05 -0400 Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: "Linux-scsi vger.kernel.org" Hi all, I had been last 2 Day in China trying update a Linux (Debian Sarge) running a 2.6.14.3 to 2.6.21.6 or 2.6.22.1 The boot stuck in a VFS Kernel Panic no root filesystem found. 1) aacraid compiled into kernel - failed 2) as module + initrd - failed the initrd show that the sda with 200GB was found - driver sd but no partition was found. Sorry I could not get a serial cable to cover the boot log - and it's impossible to get one if you can't speak Mandarin. Do you have any hint what I could do? Thank you Chris Controller is 0000:02:08.0 RAID bus controller: Adaptec AAC-RAID (rev 01) Subsystem: Adaptec 2120S (Crusader) kerneloutput """ 2.6.14.3 """ Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Adaptec aacraid driver (1.1-4 Jan 28 2006 18:35:59) AAC0: kernel 4.2-0[8205] AAC0: monitor 4.2-0[8205] AAC0: bios 4.2-0[8205] AAC0: serial c49a76 AAC0: Non-DASD support enabled. scsi0 : aacraid Vendor: ADAPTEC Model: XITArray1 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 3ware 9000 Storage Controller device driver for Linux v2.26.02.004. SCSI device sda: 429920256 512-byte hdwr sectors (220119 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 sda: got wrong page sda: assuming drive cache: write through SCSI device sda: 429920256 512-byte hdwr sectors (220119 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 sda: got wrong page sda: assuming drive cache: write through sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > -- X-IT Management Ltd. Office A, 14/F, Wing Sing Commercial Bldg. 12 Wing Lok Street, Sheung Wan Hong Kong 3596 7575 PHONE 3585 5118 FAX