From: Mike Rapoport <mike@compulab.co.il>
To: Rok Markovic <kernel@kanardia.eu>
Cc: LKML <linux-kernel@vger.kernel.org>,
linux-arm-kernel@lists.arm.linux.org.uk
Subject: Re: Oops on arm pxa270 2.6.22
Date: Thu, 19 Jul 2007 14:04:05 +0300 [thread overview]
Message-ID: <469F4525.5040309@compulab.co.il> (raw)
In-Reply-To: <469F1CDA.8080304@kanardia.eu>
Rok Markovic wrote:
> Hi
>
> I would like to ask what could be a problem or how could I start
> debuging it.
> My board is cm-x270 from compulab and it successfully boot until it should
> start init from busysbox. I get the folowing report.
>
> environment:
> pxa270
> 128Mb RAM
> network boot
> gcc 3.4.5 softfloat
>
>
> Linux image detected in memory at 0xA0100000, booting...
[snip]
> pxa2xx-fb: probe of pxa2xx-fb failed with error -22
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[snip]
> RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize
> bootserver=0.0.0.0, rootserver=192.168.10.124, rootpath=
> Looking up port of RPC 100003/2 on 192.168.10.124
> Looking up port of RPC 100005/1 on 192.168.10.124
> VFS: Mounted root (nfs filesystem).
> Freeing init memory: 108K
> Unable to handle kernel NULL pointer dereference at virtual address
> 00000004
> pgd = c0004000
> [00000004] *pgd=00000000
> Internal error: Oops: f5 [#1]
> Modules linked in:
> CPU: 0 Not tainted (2.6.22-cm-x270 #2)
> PC is at init_dev+0x38/0x5b8
> LR is at tty_open+0xf8/0x33c
> pc : [<c0135dd8>] lr : [<c0136450>] psr: 60000013
[snip]
> 3fe0: 00000000 00000000 00000000 c0423ff8 c003c9e8 c0008b30 e1a01007
> ebfd4ec0
> Backtrace:
> [<c0135da0>] (init_dev+0x0/0x5b8) from [<c0136450>] (tty_open+0xf8/0x33c)
> [<c0136358>] (tty_open+0x0/0x33c) from [<c0088600>]
> (chrdev_open+0x114/0x174)
> r8:c04e0d20 r7:00000000 r6:00000000 r5:c048f76c r4:c02e5c3c
> [<c00884ec>] (chrdev_open+0x0/0x174) from [<c00847d0>]
> (__dentry_open+0x188/0x228)
> r8:c0531c80 r7:c04ae364 r6:c00884ec r5:c048f76c r4:c04e0d20
> [<c0084648>] (__dentry_open+0x0/0x228) from [<c00848a4>]
> (nameidata_to_filp+0x34/0x4c)
> [<c0084870>] (nameidata_to_filp+0x0/0x4c) from [<c0084908>]
> (do_filp_open+0x4c/0x50)
> r4:00000002
> [<c00848bc>] (do_filp_open+0x0/0x50) from [<c0084c48>]
> (do_sys_open+0x5c/0xec)
> r5:00000000 r4:00000002
> [<c0084bec>] (do_sys_open+0x0/0xec) from [<c0084cfc>] (sys_open+0x24/0x28)
> [<c0084cd8>] (sys_open+0x0/0x28) from [<c0023300>] (init_post+0x2c/0xfc)
> [<c00232d4>] (init_post+0x0/0xfc) from [<c0008c80>]
> (kernel_init+0x15c/0x2bc)
> r4:c02afed8
> [<c0008b24>] (kernel_init+0x0/0x2bc) from [<c003c9e8>] (do_exit+0x0/0x86c)
> Code: e3a03000 e5823000 059030b8 e1a06000 (07935107)
> Kernel panic - not syncing: Attempted to kill init!
I think you have conflict between PXA serial and 8250 drivers. Make sure you use
only one of them.
If you need to use PCMCIA serial cards, please see
http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2007-July/040604.html
--
Sincerely yours,
Mike.
next prev parent reply other threads:[~2007-07-19 11:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-19 8:12 Oops on arm pxa270 2.6.22 Rok Markovic
2007-07-19 11:04 ` Mike Rapoport [this message]
2007-07-19 12:42 ` Rok Markovic
-- strict thread matches above, loose matches on Subject: below --
2007-07-19 9:15 Rok Markovic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=469F4525.5040309@compulab.co.il \
--to=mike@compulab.co.il \
--cc=kernel@kanardia.eu \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.