From: Seokmann Ju <seokmann.ju@qlogic.com>
To: James.Bottomley@SteelEye.com
Cc: rlary@us.ibm.com, Andrew Vasquez <andrew.vasquez@qlogic.com>,
linux-scsi@vger.kernel.org
Subject: [PATCH] qla2xxx: fix to honor ignored parameters in sysfs attributes
Date: Thu, 26 Jul 2007 13:43:34 -0700 [thread overview]
Message-ID: <46A90776.4030804@qlogic.com> (raw)
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
This is a patch to fix 'segmentation fault' issue which was initiated by Richard Lary <rlary@us.ibm.com>.
Thanks again Richard.
---
>From 6abcf236b5c7fea75d7059facf77a255f02e96af Mon Sep 17 00:00:00 2001
From: Seokmann Ju <seokmann.ju@qlogic.com>
Date: Thu, 26 Jul 2007 16:09:48 -0400
Subject: [PATCH] qla2xxx: fix to honor ignored parameters in sysfs attributes
- on following sysfs attritute function, changes have made so that both
count and offset input parameters are honored by the functions.
= qla2x00_sysfs_read_nvram()
= qla2x00_sysfs_read_vpd()
- made changes so that NVRAM data to be cached to minimize H/W accesses
during agent querying of the driver's.
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
---
drivers/scsi/qla2xxx/qla_attr.c | 39 +++++++++++++++++++++++----------------
drivers/scsi/qla2xxx/qla_def.h | 4 ++++
drivers/scsi/qla2xxx/qla_init.c | 19 +++++++++++--------
3 files changed, 38 insertions(+), 24 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 1612f92..0f2a9f5 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -91,18 +91,20 @@ qla2x00_sysfs_read_nvram(struct kobject *kobj,
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
- unsigned long flags;
+ int size = ha->nvram_size;
+ char *nvram_cache = ha->nvram;
- if (!capable(CAP_SYS_ADMIN) || off != 0)
+ if (!capable(CAP_SYS_ADMIN) || off > size || count == 0)
return 0;
+ if (off + count > size) {
+ size -= off;
+ count = size;
+ }
- /* Read NVRAM. */
- spin_lock_irqsave(&ha->hardware_lock, flags);
- ha->isp_ops->read_nvram(ha, (uint8_t *)buf, ha->nvram_base,
- ha->nvram_size);
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ /* Read NVRAM data from cache. */
+ memcpy(buf, &nvram_cache[off], count);
- return ha->nvram_size;
+ return count;
}
static ssize_t
@@ -144,6 +146,8 @@ qla2x00_sysfs_write_nvram(struct kobject *kobj,
/* Write NVRAM. */
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->isp_ops->write_nvram(ha, (uint8_t *)buf, ha->nvram_base, count);
+ ha->isp_ops->read_nvram(ha, (uint8_t *)&ha->nvram, ha->nvram_base,
+ count);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
@@ -298,18 +302,20 @@ qla2x00_sysfs_read_vpd(struct kobject *kobj,
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
- unsigned long flags;
+ int size = ha->vpd_size;
+ char *vpd_cache = ha->vpd;
- if (!capable(CAP_SYS_ADMIN) || off != 0)
+ if (!capable(CAP_SYS_ADMIN) || off > size || count == 0)
return 0;
+ if (off + count > size) {
+ size -= off;
+ count = size;
+ }
- /* Read NVRAM. */
- spin_lock_irqsave(&ha->hardware_lock, flags);
- ha->isp_ops->read_nvram(ha, (uint8_t *)buf, ha->vpd_base,
- ha->vpd_size);
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ /* Read NVRAM data from cache. */
+ memcpy(buf, &vpd_cache[off], count);
- return ha->vpd_size;
+ return count;
}
static ssize_t
@@ -327,6 +333,7 @@ qla2x00_sysfs_write_vpd(struct kobject *kobj,
/* Write NVRAM. */
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->isp_ops->write_nvram(ha, (uint8_t *)buf, ha->vpd_base, count);
+ ha->isp_ops->read_nvram(ha, (uint8_t *)ha->vpd, ha->vpd_base, count);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return count;
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 0c9f36c..27ae3a5 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2340,10 +2340,14 @@ typedef struct scsi_qla_host {
uint8_t serial2;
/* NVRAM configuration data */
+#define MAX_NVRAM_SIZE 4096
+#define VPD_OFFSET MAX_NVRAM_SIZE / 2
uint16_t nvram_size;
uint16_t nvram_base;
+ void *nvram;
uint16_t vpd_size;
uint16_t vpd_base;
+ void *vpd;
uint16_t loop_reset_delay;
uint8_t retry_count;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 5ec798c..374abe1 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1461,8 +1461,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
uint16_t cnt;
uint8_t *dptr1, *dptr2;
init_cb_t *icb = ha->init_cb;
- nvram_t *nv = (nvram_t *)ha->request_ring;
- uint8_t *ptr = (uint8_t *)ha->request_ring;
+ nvram_t *nv = ha->nvram;
+ uint8_t *ptr = ha->nvram;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
rval = QLA_SUCCESS;
@@ -1480,8 +1480,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
chksum += *ptr++;
DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
- DEBUG5(qla2x00_dump_buffer((uint8_t *)ha->request_ring,
- ha->nvram_size));
+ DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' ||
@@ -3500,7 +3499,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
rval = QLA_SUCCESS;
icb = (struct init_cb_24xx *)ha->init_cb;
- nv = (struct nvram_24xx *)ha->request_ring;
+ nv = ha->nvram;
/* Determine NVRAM starting address. */
ha->nvram_size = sizeof(struct nvram_24xx);
@@ -3512,7 +3511,12 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
ha->vpd_base = FA_NVRAM_VPD1_ADDR;
}
- /* Get NVRAM data and calculate checksum. */
+ /* Get VPD data into cache */
+ ha->vpd = ha->nvram + VPD_OFFSET;
+ ha->isp_ops->read_nvram(ha, (uint8_t *)ha->vpd,
+ ha->nvram_base - FA_NVRAM_FUNC0_ADDR, FA_NVRAM_VPD_SIZE * 4);
+
+ /* Get NVRAM data into cache and calculate checksum. */
dptr = (uint32_t *)nv;
ha->isp_ops->read_nvram(ha, (uint8_t *)dptr, ha->nvram_base,
ha->nvram_size);
@@ -3520,8 +3524,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
chksum += le32_to_cpu(*dptr++);
DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
- DEBUG5(qla2x00_dump_buffer((uint8_t *)ha->request_ring,
- ha->nvram_size));
+ DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
--
1.5.2
---
reply other threads:[~2007-07-26 20:44 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46A90776.4030804@qlogic.com \
--to=seokmann.ju@qlogic.com \
--cc=James.Bottomley@SteelEye.com \
--cc=andrew.vasquez@qlogic.com \
--cc=linux-scsi@vger.kernel.org \
--cc=rlary@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.