All of lore.kernel.org
 help / color / mirror / Atom feed
From: Moni Shoua <monis@voltaire.com>
To: rdreier@cisco.com,  davem@davemloft.net,  fubar@us.ibm.com
Cc: netdev@vger.kernel.org, general@lists.openfabrics.org
Subject: [ofa-general] [PATCH V3 6/7] net/bonding: Handlle wrong assumptions that slave is always an Ethernet device
Date: Mon, 30 Jul 2007 15:54:59 +0300	[thread overview]
Message-ID: <46ADDFA3.1000100@voltaire.com> (raw)
In-Reply-To: <46ADDB89.5030601@voltaire.com>


bonding sometimes uses Ethernet constants (such as MTU and address length) which
are not good when it enslaves non Ethernet devices (such as InfiniBand).

Signed-off-by: Moni Shoua <monis@voltaire.com>
---
 drivers/net/bonding/bond_main.c  |    2 +-
 drivers/net/bonding/bond_sysfs.c |   10 ++++++++--
 drivers/net/bonding/bonding.h    |    1 +
 3 files changed, 10 insertions(+), 3 deletions(-)

Index: net-2.6/drivers/net/bonding/bond_main.c
===================================================================
--- net-2.6.orig/drivers/net/bonding/bond_main.c	2007-07-25 15:06:17.000000000 +0300
+++ net-2.6/drivers/net/bonding/bond_main.c	2007-07-25 15:33:25.012883360 +0300
@@ -1255,7 +1255,7 @@ static int bond_compute_features(struct 
 	unsigned long features = BOND_INTERSECT_FEATURES;
 	struct slave *slave;
 	struct net_device *bond_dev = bond->dev;
-	unsigned short max_hard_header_len = ETH_HLEN;
+	u16 max_hard_header_len = max((u16)ETH_HLEN, bond_dev->hard_header_len);
 	int i;
 
 	bond_for_each_slave(bond, slave, i) {
Index: net-2.6/drivers/net/bonding/bond_sysfs.c
===================================================================
--- net-2.6.orig/drivers/net/bonding/bond_sysfs.c	2007-07-25 15:06:17.000000000 +0300
+++ net-2.6/drivers/net/bonding/bond_sysfs.c	2007-07-25 15:20:10.224527636 +0300
@@ -260,6 +260,7 @@ static ssize_t bonding_store_slaves(stru
 	char command[IFNAMSIZ + 1] = { 0, };
 	char *ifname;
 	int i, res, found, ret = count;
+	u32 original_mtu;
 	struct slave *slave;
 	struct net_device *dev = NULL;
 	struct bonding *bond = to_bond(d);
@@ -325,6 +326,7 @@ static ssize_t bonding_store_slaves(stru
 		}
 
 		/* Set the slave's MTU to match the bond */
+		original_mtu = dev->mtu;
 		if (dev->mtu != bond->dev->mtu) {
 			if (dev->change_mtu) {
 				res = dev->change_mtu(dev,
@@ -339,6 +341,9 @@ static ssize_t bonding_store_slaves(stru
 		}
 		rtnl_lock();
 		res = bond_enslave(bond->dev, dev);
+		bond_for_each_slave(bond, slave, i)
+			if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0)
+				slave->original_mtu=original_mtu;
 		rtnl_unlock();
 		if (res) {
 			ret = res;
@@ -351,6 +356,7 @@ static ssize_t bonding_store_slaves(stru
 		bond_for_each_slave(bond, slave, i)
 			if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) {
 				dev = slave->dev;
+				original_mtu = slave->original_mtu;
 				break;
 			}
 		if (dev) {
@@ -365,9 +371,9 @@ static ssize_t bonding_store_slaves(stru
 			}
 			/* set the slave MTU to the default */
 			if (dev->change_mtu) {
-				dev->change_mtu(dev, 1500);
+				dev->change_mtu(dev, original_mtu);
 			} else {
-				dev->mtu = 1500;
+				dev->mtu = original_mtu;
 			}
 		}
 		else {
Index: net-2.6/drivers/net/bonding/bonding.h
===================================================================
--- net-2.6.orig/drivers/net/bonding/bonding.h	2007-07-25 15:03:32.000000000 +0300
+++ net-2.6/drivers/net/bonding/bonding.h	2007-07-25 15:20:10.223527810 +0300
@@ -156,6 +156,7 @@ struct slave {
 	s8     link;    /* one of BOND_LINK_XXXX */
 	s8     state;   /* one of BOND_STATE_XXXX */
 	u32    original_flags;
+	u32    original_mtu;
 	u32    link_failure_count;
 	u16    speed;
 	u8     duplex;

  parent reply	other threads:[~2007-07-30 12:54 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-07-30 12:37 [ofa-general] [PATCH V3 0/7] net/bonding: ADD IPoIB support for the bonding driver Moni Shoua
2007-07-30 12:48 ` [ofa-general] [PATCH V3 1/7] IB/ipoib: Bound the net device to the ipoib_neigh structue Moni Shoua
2007-07-30 12:49 ` [ofa-general] [PATCH V3 2/7] IB/ipoib: Verify address handle validity on send Moni Shoua
2007-07-30 12:51 ` [ofa-general] [PATCH V3 3/7] net/bonding: Enable bonding to enslave non ARPHRD_ETHER Moni Shoua
2007-07-30 12:52 ` [ofa-general] [PATCH V3 4/7] net/bonding: Enable bonding to enslave netdevices not supporting set_mac_address() Moni Shoua
2007-07-30 12:54 ` [ofa-general] [PATCH V3 5/7] net/bonding: Enable IP multicast for bonding IPoIB devices Moni Shoua
2007-07-30 12:54 ` Moni Shoua [this message]
2007-07-30 12:56 ` [ofa-general] [PATCH V3 7/7] net/bonding: Delay sending of gratuitous ARP to avoid failure Moni Shoua
2007-07-30 20:29   ` [ofa-general] " Jay Vosburgh
2007-07-31 13:33     ` Moni Shoua
2007-07-30 21:20 ` [PATCH V3 0/7] net/bonding: ADD IPoIB support for the bonding driver Roland Dreier
2007-07-31 13:44   ` [ofa-general] " Moni Shoua
2007-07-31 14:04     ` [ofa-general] " Michael S. Tsirkin
2007-07-31 14:19       ` Or Gerlitz
2007-07-31 14:22         ` [ofa-general] " Michael S. Tsirkin
2007-07-31 14:36           ` Or Gerlitz
2007-07-31 14:48             ` Michael S. Tsirkin
2007-07-31 14:57               ` [ofa-general] " Or Gerlitz
2007-08-01 14:12           ` [ofa-general] Re: " Moni Shoua
2007-08-01 16:10             ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=46ADDFA3.1000100@voltaire.com \
    --to=monis@voltaire.com \
    --cc=davem@davemloft.net \
    --cc=fubar@us.ibm.com \
    --cc=general@lists.openfabrics.org \
    --cc=netdev@vger.kernel.org \
    --cc=rdreier@cisco.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.