From: "Rafał Bilski" <rafalbilski@interia.pl>
To: Jaroslav Kysela <perex@suse.cz>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: CS5530 Alsa driver fails
Date: Wed, 01 Aug 2007 01:04:55 +0200 [thread overview]
Message-ID: <46AFC017.8090805@interia.pl> (raw)
Hello,
Linux: 2.6.23-rc1-git3
Hardware: CX5530
After "modprobe snd-cs5530" I have:
CS5530: XpressAudio at 0x220
CS5530: MPU at 0x330
CS5530: IRQ: 9 DMA8: 0 DMA16: 5
sb: can't grab irq 9
CS5530: Could not create SoundBlaster
CS5530_Audio: probe of 0000:00:12.3 failed with error -16
Thank You
Rafał
~ $ cat /proc/interrupts
CPU0
0: 26624 XT-PIC-XT timer
2: 0 XT-PIC-XT cascade
4: 428 XT-PIC-XT serial
8: 0 XT-PIC-XT rtc
9: 10793 XT-PIC-XT ohci_hcd:usb1
10: 1326 XT-PIC-XT eth0
NMI: 0
ERR: 0
~ $ lspci -v
00:00.0 Host bridge: Cyrix Corporation PCI Master
Flags: bus master, medium devsel, latency 0
00:0f.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
Subsystem: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at f800 [size=256]
Memory at 10010000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 10000000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
00:12.0 ISA bridge: Cyrix Corporation 5530 Legacy [Kahlua]
Flags: bus master, medium devsel, latency 0
00:12.1 Bridge: Cyrix Corporation 5530 SMI [Kahlua]
Flags: medium devsel
Memory at 40012000 (32-bit, non-prefetchable) [size=256]
00:12.2 IDE interface: Cyrix Corporation 5530 IDE [Kahlua] (prog-if 80 [Master])
Flags: medium devsel
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at 1000 [disabled] [size=128]
00:12.3 Multimedia audio controller: Cyrix Corporation 5530 Audio [Kahlua]
Flags: medium devsel
Memory at 40011000 (32-bit, non-prefetchable) [size=128]
00:12.4 VGA compatible controller: Cyrix Corporation 5530 Video [Kahlua] (prog-if 00 [VGA])
Flags: medium devsel
Memory at 40010000 (32-bit, non-prefetchable) [size=4K]
00:13.0 USB Controller: Compaq Computer Corporation ZFMicro Chipset USB (rev 06) (prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation ZFMicro Chipset USB
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at 000cc000 (32-bit, non-prefetchable) [size=4K]
----------------------------------------------------------------------
Kobiety klamia o wiele skuteczniej niz mezczyzni.
Sprawdz, jak sie na nich poznac
>>>http://link.interia.pl/f1b16
next reply other threads:[~2007-07-31 23:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-31 23:04 Rafał Bilski [this message]
2007-07-31 23:53 ` CS5530 Alsa driver fails Alan Cox
2007-08-01 10:44 ` Takashi Iwai
2007-08-01 12:11 ` Rafał Bilski
-- strict thread matches above, loose matches on Subject: below --
2007-08-01 17:41 Ash Willis
2007-08-01 18:51 ` Rafał Bilski
2007-08-01 22:08 ` Alan Cox
2007-08-02 16:18 ` Rafał Bilski
2007-08-02 1:17 Ash Willis
2007-08-02 12:57 ` Alan Cox
2007-08-02 15:23 ` Jordan Crouse
2007-08-02 17:01 ` Alan Cox
2007-08-02 17:00 ` Jordan Crouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46AFC017.8090805@interia.pl \
--to=rafalbilski@interia.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.